journal article·2022-07

Effect of scale formation and CP potentials on AC-induced pitting corrosion of low carbon steels

Lizeth Sanchez, Trey Fricker, Hongbo Cong

Journal of Materials Science· Volume 57· Issue 28
Publisher page

Abstract

The effect of AC voltages, cathodic protection (CP) potentials and calcareous scale on the pitting corrosion of carbon steel 1010 was investigated by potentiostatic tests, electrochemical impedance spectroscopy (EIS) measurements and surface characterization techniques. Under the CP potential of − 1.12 VSCE, pitting corrosion increased with increasing AC voltage due to higher DC and AC current densities. The highest pitting severity was found at the highest AC current density over 4000 A/m2, facilitated by the utilization of microelectrodes. The presence of calcium and magnesium deposits reduced the pitting severity for all AC conditions acting as a barrier on the steel surface. Under constant high AC voltage, the dominant form of corrosion (uniform vs. pitting) depended on the applied CP potential and lowering the CP potential to − 1.5 VSCE promoted greater metal dissolution. It was also found that the presence of AC interference was not necessary for pit initiation, but it promoted pit growth.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Akpanyung KV, Loto RT (2019) Pitting corrosion evaluation: a review. J Phys Conf Ser 1378:022088. https://doi.org/10.1088/1742-6596/1378/2/02208810.1088/1742-6596/1378/2/022088 ↗
2. Frankel GS (1998) Pitting corrosion of metals: a review of the critical factors. J Electrochem Soc 145:2186–2198. https://doi.org/10.1149/1.183861510.1149/1.1838615 ↗
3. Linhardt P, Ball G (2006) AC corrosion: results from laboratory investigations and from a failure analysis. CORROSION/2006 conference, Paper No. 06160. NACE International. San Diego, CA, USA, pp 1–9
4. Xu X, Xu L, Liu W, Lu M (2011) Study of AC corrosion on coated pipeline steel in simulated soil solution. CORROSION/2011 conference, Paper No. 11343, NACE International. Houston, TX, USA, pp 1–20
5. Wakelin RG, Gummow RA, Segall SM (1998) AC corrosion case histories, test procedures, and mitigation. CORROSION/1998 conference, Paper No. 565, NACE International. Houston, TX, USA, pp 1–14
6. Fu AQ, Cheng YF (2010) Effects of alternating current on corrosion of a coated pipeline steel in a chloride-containing carbonate/bicarbonate solution. Corros Sci 52:612–619. https://doi.org/10.1016/j.corsci.2009.10.02210.1016/j.corsci.2009.10.022 ↗
7. Goidanich S, Lazzari L, Ormellese M (2010) AC corrosion. Part 2: parameters influencing corrosion rate. Corros Sci 52:916–922. https://doi.org/10.1016/j.corsci.2009.11.01210.1016/j.corsci.2009.11.012 ↗
8. Sanchez L, Fricker T, Cong H (2022) AC induced pitting and pit-to-crack transition of low carbon steels under cathodic protection. Corros Sci 203:110335. https://doi.org/10.1016/j.corsci.2022.11033510.1016/j.corsci.2022.110335 ↗
9. Büchler M, Schöneich H-G (2009) Investigation of alternating current corrosion of cathodically protected pipelines: development of a detection method mitigation measures and a model for the mechanism. Corrosion 65:578–586. https://doi.org/10.5006/1.331916010.5006/1.3319160 ↗
10. Brenna A, Ormellese M, Lazzari L (2016) Electromechanical breakdown mechanism of passive film in alternating current-related corrosion of carbon steel under cathodic protection condition. Corrosion 72:1055–1063. https://doi.org/10.5006/184910.5006/1849 ↗
11. Brenna A, Ormellese M, Lazzari L (2013) A Proposal of AC corrosion mechanism of carbon steel in cathodic protection condition. CORROSION/2013 conference, Paper No. 2457. NACE International. Orlando, FL, USA, pp 1–15
12. Junker A, Møller P, Nielsen LV (2017) Effect of chemical environment and pH on AC corrosion of cathodically protected structures. CORROSION/2017 conference. Paper No. 9352, NACE International, New Orleans, LA, USA, pp 1–14
13. Kuang D, Cheng YF (2015) AC corrosion at coating defect on pipelines. Corrosion 71:267–276. https://doi.org/10.5006/137710.5006/1377 ↗
14. Jiang Z, Du Y, Lu M et al (2014) New findings on the factors accelerating AC corrosion of buried pipeline. Corros Sci 81:1–10. https://doi.org/10.1016/j.corsci.2013.09.00510.1016/j.corsci.2013.09.005 ↗
15. Guo Y, Liu C, Wang D, Liu S-H (2015) Effects of alternating current interference on corrosion of X60 pipeline steel. Pet Sci 12:316–324. https://doi.org/10.1007/s12182-015-0022-010.1007/s12182-015-0022-0 ↗
16. Kuang D, Cheng YF (2014) Understand the AC induced pitting corrosion on pipelines in both high pH and neutral pH carbonate/bicarbonate solutions. Corros Sci 85:304–310. https://doi.org/10.1016/j.corsci.2014.04.03010.1016/j.corsci.2014.04.030 ↗
17. Wen C, Li J, Wang S, Yang Y (2015) Experimental study on stray current corrosion of coated pipeline steel. J Nat Gas Sci Eng 27:1555–1561. https://doi.org/10.1016/j.jngse.2015.10.02210.1016/j.jngse.2015.10.022 ↗
18. Zhu M, Du C, Li X et al (2014) Effect of AC on stress corrosion cracking behavior and mechanism of X80 pipeline steel in carbonate/bicarbonate solution. Corros Sci 87:224–232. https://doi.org/10.1016/j.corsci.2014.06.02810.1016/j.corsci.2014.06.028 ↗
19. Zhu M, Yang JL, Chen YB et al (2020) Effect of alternating current on passive film and corrosion behavior of pipeline steel with different microstructures in carbonate/bicarbonate solution. J Mater Eng Perform 29:423–433. https://doi.org/10.1007/s11665-019-04541-x10.1007/s11665-019-04541-x ↗
20. Zhu M, Du CW (2017) A new understanding on AC corrosion of pipeline steel in alkaline environment. J Mater Eng Perform 26:221–228. https://doi.org/10.1007/s11665-016-2416-610.1007/s11665-016-2416-6 ↗
21. Tang DZ, Du YX, Lu MX et al (2015) Effect of pH value on corrosion of carbon steel under an applied alternating current. Mater Corros 66:1467–1479. https://doi.org/10.1002/maco.20150836510.1002/maco.201508365 ↗
22. Fu AQ, Cheng YF (2012) Effect of alternating current on corrosion and effectiveness of cathodic protection of pipelines. Can Metall Q 51:81–90. https://doi.org/10.1179/1879139511Y.000000002110.1179/1879139511Y.0000000021 ↗
23. Wang L, Cheng L, Li J et al (2018) Combined effect of alternating current interference and cathodic protection on pitting corrosion and stress corrosion cracking behavior of X70 pipeline steel in near-neutral pH environment. Materials (Basel) 11:1–19. https://doi.org/10.3390/ma1104046510.3390/ma11040465 ↗
24. Lalvani SB, Zhang G (1995) The corrosion of carbon steel in a chloride environment due to periodic voltage modulation: part II. Corros Sci 37:1583–1598. https://doi.org/10.1016/0010-938X(95)00056-P10.1016/0010-938X(95)00056-P ↗
25. Muralidharan S, Kim DK, Ha TH et al (2007) Influence of alternating, direct and superimposed alternating and direct current on the corrosion of mild steel in marine environments. Desalination 216:103–115. https://doi.org/10.1016/j.desal.2006.11.02110.1016/j.desal.2006.11.021 ↗
26. Ormellese M, Brenna A, Lazzari L (2015) AC corrosion of cathodically protected buried pipelines: critical interference values and protection criteria. CORROSION/2015 conference, Paper No. 5753, NACE International, Dallas, TX, USA, pp 1–11
27. Xu LY, Su X, Cheng YF (2013) Effect of alternating current on cathodic protection on pipelines. Corros Sci 66:263–268. https://doi.org/10.1016/j.corsci.2012.09.02810.1016/j.corsci.2012.09.028 ↗
28. Horner DA, Connolly BJ, Zhou S et al (2011) Novel images of the evolution of stress corrosion cracks from corrosion pits. Corros Sci 53:3466–3485. https://doi.org/10.1016/j.corsci.2011.05.05010.1016/j.corsci.2011.05.050 ↗
29. Turnbull A, Zhou S (2004) Pit to crack transition in stress corrosion cracking of a steam turbine disc steel. Corros Sci 46:1239–1264. https://doi.org/10.1016/j.corsci.2003.09.01710.1016/j.corsci.2003.09.017 ↗
30. Parkins RN, Blanchard WK, Delanty BS (1994) Transgranular stress corrosion cracking of high-pressure pipelines in contact with solutions of near neutral pH. Corrosion 50(5):394–408. https://doi.org/10.5006/1.329434810.5006/1.3294348 ↗
31. Yang Y, Scantlebury JD, Koroleva EV (2015) A study of calcareous deposits on cathodically protected mild steel in artificial seawater. Metals (Basel) 5:439–456. https://doi.org/10.3390/met501043910.3390/met5010439 ↗
32. Prosek T, Thierry D, Taxén C, Maixner J (2007) Effect of cations on corrosion of zinc and carbon steel covered with chloride deposits under atmospheric conditions. Corros Sci 49:2676–2693. https://doi.org/10.1016/j.corsci.2006.11.00410.1016/j.corsci.2006.11.004 ↗
33. ASTM International (1999) G1–90 standard practice for preparing, cleaning, and evaluation corrosion test specimens
34. Sanchez L, Cong H (2021) Effect of AC interference on the stress corrosion cracking susceptibility of X65 steel under cathodic protection. Eng Fail Anal 129:1–16. https://doi.org/10.1016/j.engfailanal.2021.10566110.1016/j.engfailanal.2021.105661 ↗
35. Gabrielli C, Keddam M, Khalil A et al (1997) Study of calcium carbonate scales by electrochemical impedance spectroscopy. Electrochim Acta 42:1207–1218. https://doi.org/10.1016/S0013-4686(96)00289-710.1016/S0013-4686(96)00289-7 ↗
36. Barchiche Ch, Deslouis C, Festy D et al (2003) Characterization of calcareous deposits in artificial seawater by impedance techniques: 3-deposits of CaCO3 in the presence of Mg(II). Electrochim Acta 48(12):1645–1654. https://doi.org/10.1016/S0013-4686(03)00075-610.1016/S0013-4686(03)00075-6 ↗
37. Brug G, Van den Eeden A, Sluyters-Rehbach M, Sluyters JH (1984) The analysis of electrode impedances complicated by the presence of a constant phase element. J Electroanal Chem Interfacial Electrochem 176:275–295. https://doi.org/10.1016/S0022-0728(84)80324-110.1016/S0022-0728(84)80324-1 ↗
38. Hirschorn B, Orazem ME, Tribollet B et al (2010) Determination of effective capacitance and film thickness from constant-phase-element parameters. Electrochim Acta 55:6218–6227. https://doi.org/10.1016/j.electacta.2009.10.06510.1016/j.electacta.2009.10.065 ↗
39. Ghanbari E, Lillard S (2017) The influence of CaCO3 scale formation on AC corrosion rates of pipeline steel under cathodic protection. Corrosion 74:551–565. https://doi.org/10.5006/263710.5006/2637 ↗
40. De MR, Basilico E, Mingant R et al (2020) A study by electrochemical impedance spectroscopy and surface analysis of corrosion product layers formed during CO2 corrosion of low alloy steel. Corros Sci 172:108666. https://doi.org/10.1016/j.corsci.2020.10866610.1016/j.corsci.2020.108666 ↗
41. Xu W, Daub K, Zhang X et al (2009) Oxide formation and conversion on carbon steel in mildly basic solutions. Electrochim Acta 54:5727–5738. https://doi.org/10.1016/j.electacta.2009.05.02010.1016/j.electacta.2009.05.020 ↗
42. NACE International (2002) NACE TM0497 Measurement techniques related to criteria for cathodic protection on underground or submerged metallic piping systems
43. Ibrahim I, Tribollet B, Takenouti H, Meyer M (2015) AC-induced corrosion of underground steel pipelines. Faradaic rectification under cathodic protection: I. theoretical approach with negligible electrolyte resistance. J Braz Chem Soc 26:196–208. https://doi.org/10.5935/0103-5053.2014024610.5935/0103-5053.20140246 ↗
44. Bertocci U (1979) AC induced corrosion. The effect of an alternating voltage on electrodes under charge-transfer control. Corrosion 35:211–215. https://doi.org/10.5006/0010-9312-35.5.21110.5006/0010-9312-35.5.211 ↗
45. Bosch RW, Bogaerts WF (1998) A theoretical study of AC-induced corrosion considering diffusion phenomena. Corros Sci 40(2–3):323–336. https://doi.org/10.1016/S0010-938X(97)00139-X10.1016/S0010-938X(97)00139-X ↗
46. Ibrahim I, Meyer M, Takenouti H, Tribollet B (2016) AC induced corrosion of underground steel pipelines. Faradaic rectification under cathodic protection: II. Theoretical approach with electrolyte resistance and double layer capacitance for Bi-Tafelian corrosion mechanism. J Braz Chem Soc 27:605–615. https://doi.org/10.5935/0103-5053.2015030210.5935/0103-5053.20150302 ↗
47. Oldham KB (1957) Faradaic rectification: Theory and application to the Hg22+/Hg electrode. Trans Faraday Soc 53:80–90. https://doi.org/10.1039/tf957530008010.1039/tf9575300080 ↗
48. Büchler M (2012) Alternating current corrosion of cathodically protected pipelines: Discussion of the involved processes and their consequences on the critical interference values. Mater Corros 63:1181–1187. https://doi.org/10.1002/maco.20120669010.1002/maco.201206690 ↗
49. Ghanbari E, Iannuzzi M, Lillard RS (2016) The mechanism of alternating current corrosion of API grade X65 pipeline steel. Corrosion 72(9):1196–1210. https://doi.org/10.5006/202810.5006/2028 ↗
50. Xu LY, Su X, Yin ZX et al (2012) Development of a real-time AC/DC data acquisition technique for studies of AC corrosion of pipelines. Corros Sci 61:215–223. https://doi.org/10.1016/j.corsci.2012.04.03810.1016/j.corsci.2012.04.038 ↗
51. Yunovich M, Thompson NG (2004) AC corrosion : mechanism and proposed model. International Pipeline Conference, Paper No. IPC 2004-574, Calgary, Alberta, Canada, pp 183–195. https://doi.org/10.1115/IPC2004-057410.1115/IPC2004-0574 ↗
52. Park I, Kim S (2020) Determination of corrosion protection current density requirement of zinc sacrificial anode for corrosion protection of AA5083-H321 in seawater. Appl Surf Sci 509:145346. https://doi.org/10.1016/j.apsusc.2020.14534610.1016/j.apsusc.2020.145346 ↗
53. Tan Y (2011) Understanding the effects of electrode inhomogeneity and electrochemical heterogeneity on pitting corrosion initiation on bare electrode surfaces. Corros Sci 53:1845–1864. https://doi.org/10.1016/j.corsci.2011.02.00210.1016/j.corsci.2011.02.002 ↗
54. Hayden SC, Chisholm C, Grudt RO et al (2019) Localized corrosion of low-carbon steel at the nanoscale. npj Mater Degrad 3:17. https://doi.org/10.1038/s41529-019-0078-110.1038/s41529-019-0078-1 ↗
55. Angst UM (2019) A critical review of the science and engineering of cathodic protection of steel in soil and concrete. Corrosion 75:1420–1433. https://doi.org/10.5006/335510.5006/3355 ↗
56. Büchler M (2020) On the mechanism of cathodic protection and its implications on criteria including AC and DC interference conditions. Corrosion 76:451–463. https://doi.org/10.5006/337910.5006/3379 ↗
57. Schmuki P, Büchler M, Virtanen S et al (1999) Passivity of iron in alkaline solutions studied by in situ XANES and a laser reflection technique. J Electrochem Soc 146:2097–2102. https://doi.org/10.1149/1.139189710.1149/1.1391897 ↗
58. Lajevardi SA, Tafreshi H, Shahrabi T (2011) Investigation of calcareous deposits formation on 5052 aluminium alloy under cathodic polarisation in natural and artificial sea water. Corros Eng Sci Technol 46(3):249–255. https://doi.org/10.1179/174327809X40913210.1179/174327809X409132 ↗
59. Neville A, Morizot AP (2002) Calcareous scales formed by cathodic protection — an assessment of characteristics and kinetics. J Cryst Growth 243:490–502. https://doi.org/10.1016/S0022-0248(02)01532-410.1016/S0022-0248(02)01532-4 ↗
60. Liu ZY, Li XG, Cheng YF (2011) Electrochemical state conversion model for occurrence of pitting corrosion on a cathodically polarized carbon steel in a near-neutral pH solution. Electrochim Acta 56:4167–4175. https://doi.org/10.1016/j.electacta.2011.01.10010.1016/j.electacta.2011.01.100 ↗
61. Stalder F (2001) AC corrosion on cathodically protected pipelines. Guidelines for risk assessment and mitigation measures, 5th Int. Congr. CeoCor.
62. Li C, Du M (2017) The growth mechanism of calcareous deposits under various hydrostatic pressures during the cathodic protection of carbon steel in seawater. RSC Adv 7:28819–28825. https://doi.org/10.1039/c7ra03709k10.1039/c7ra03709k ↗
63. Sato N (1971) A theory for breakdown of anodic oxide films on metals. Electrochim Acta 16:1683–1692. https://doi.org/10.1016/0013-4686(71)85079-X10.1016/0013-4686(71)85079-X ↗
64. Nielsen L V (2005) Role of alkalization in AC induced corrosion of pipelines and consequences hereof in relation to CP requirements. CORROSION/2005 conference, Paper No. 05188, NACE International. Houston, TX, USA, pp 1–11
65. Nielsen L V, Baumgarten B, Cohn P (2004) On-site measurements of AC induced corrosion: effect of AC and DC parameters. 8th Int. Congr. CeoCor.
66. Angst U, Büchler M, Martin B et al (2016) Cathodic protection of soil buried steel pipelines – a critical discussion of protection criteria and threshold values. Mater Corros 67:1135–1142. https://doi.org/10.1002/maco.20160886210.1002/maco.201608862 ↗
67. Kajiyama F (2011) Strategy for eliminating risks of corrosion and overprotection for buried modern pipelines. Inter Gas Union Res Conf 2011:1–21
68. Olesen AJ, Nielsen LV, Møller P (2019) Investigation of high pH corrosion under alternating current interference. Corrosion 75(8):982–989. https://doi.org/10.5006/311910.5006/3119 ↗
69. Beverskog B, Puigdomenech I (1996) Revised Pourbaix diagrams for iron at 25–300 °C. Corros Sci 38:2121–2135. https://doi.org/10.1016/S0010-938X(96)00067-410.1016/S0010-938X(96)00067-4 ↗
70. Kim D, Muralidharan S, Ha T et al (2006) Electrochemical studies on the alternating current corrosion of mild steel under cathodic protection condition in marine environments. Electrochim Acta 51:5259–5267. https://doi.org/10.1016/j.electacta.2006.01.05410.1016/j.electacta.2006.01.054 ↗