journal article·2022-05

Phase modification and magnetic property improvement in melt spun LaCo5-based ribbons

H. W. Chang, Y. M. Guo, Y. H. Fang, W. C. Chang, C. C. Shaw

Journal of Materials Science· Volume 57· Issue 19
Publisher page

Abstract

Magnetic properties of melt spun LaCo5-based ribbons are remarkably improved by phase modification and grain refinement with M (M = Ti, Zr and Hf) substitution for Co in LaCo5 and R (R = Ce, Pr, Nd, Sm, and Y) substitution for La in La Co4.7C0.3, respectively. Because of the coexistence of considerable amount (~ 42–70 vol%) of soft magnetic La2Co7 (2:7) and LaCo13 (1:13) phases with LaCo5 (1:5) phase, small coercivity (iHc) of 0.8 kOe and 0.3 kOe are found in LaCo5 and LaCo4.7C0.3 ribbons, respectively. A slight Ti, Zr, or Hf substitution for Co in LaCo4.9M0.1 ribbons is helpful to effectively decrease the amount of soft magnetic phases (down to ~ 3.1–5.6%) and refine the grain size of 1:5 phase, and therefore improves the iHc and the squareness of demagnetization curve. iHc of the ribbons is significantly improved to 8.1–11.6 kOe. On the other hand, R substitution for La in La1−xRxCo4.7C0.3 ribbons is also effective in obtaining large amount of 1:5 phase (82.8–86.2 and 90.8–97.5% for x = 0.25 and 0.5, respectively). R entrance into 1:5 phase modifies the magnetization, magnetocrystalline anisotropy field, and Curie temperature, simultaneously. In addition to large amount 1:5 phase, fine size of the grains for La1−xRxCo4.7C0.3 samples related to C-doping also contribute to enhance magnetic properties, especially large iHc and good squareness of demagnetization curve. Magnetic properties of La1−xRxCo4.7C0.3 ribbons are mainly dominated by their corresponding phase constitutions and the magnetically intrinsic properties of RCo5 phase. Accordingly, we attain the attractive magnetic properties of iHc = 15.1 kOe and (BH)max = 3.8 MGOe for La0.5Ce0.5Co4.7C0.3; iHc = 10.3 kOe and (BH)max = 4.4 MGOe for La0.5Y0.5Co4.7C0.3 and iHc = 15.8 kOe and (BH)max = 5.2 MGOe for La0.5Sm0.5Co4.7C0.3, respectively. This study provides the effective way to improve magnetic properties of isotropic melt spun LaCo5-based ribbons by phase modification and grain refinement.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Rare-earth and actinide compounds · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Herbst JF (1991) R2Fe14B materials: intrinsic properties and technological aspects. Rev Modern Phys 63:819–898. https://doi.org/10.1103/revmodphys.63.81910.1103/revmodphys.63.819 ↗
2. Kronmuller H, Parkin S (2007) Handbook of magnetism and advanced magnetic materials. Wiley, England10.1002/9780470022184 ↗
3. Jones N (2011) Materials science: the pull of stronger magnets. Nature 472:22–2310.1038/472022a ↗
4. Coey JMD (2011) Hard magnetic materials: a perspective. IEEE Trans Magn 47:4671–4681. https://doi.org/10.1109/TMAG.2011.216697510.1109/TMAG.2011.2166975 ↗
5. Gutfleisch O (2011) Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient. Adv Mater 23:821–842. https://doi.org/10.1002/adma.20100218010.1002/adma.201002180 ↗
6. Sugimoto S (2011) Current status and recent topics of rare-earth permanent magnets. J Phys D: Appl Phys 44:064001. https://doi.org/10.1088/0022-3727/44/6/06400110.1088/0022-3727/44/6/064001 ↗
7. Skomski R, Coey JMD (2016) Magnetic anisotropy—How much is enough for a permanent magnet? Scr Mater 112:3–810.1016/j.scriptamat.2015.09.021 ↗
8. Chang HW, Lee YI, Liao PH, Chang WC (2018) Significant coercivity enhancement of hot deformed NdFeB magnets by doping Ce-containing (PrNdCe)70Cu30 alloys powders. Scr Mater 146:222–22510.1016/j.scriptamat.2017.11.052 ↗
9. Chang HW, Hsieh CC, Gan JY, Cheng YT, Shih MF, Chang WC (2011) Alloying effect on the magnetic properties of RFeB-type bulk magnets. J Phys D: Appl Phys 44:064002. https://doi.org/10.1088/0022-3727/44/6/06400210.1088/0022-3727/44/6/064002 ↗
10. Chiu CH, Chang HW, Chang CW, Chang WC (2007) Magnetic properties, phase evolution and coercivity mechanism of Pr–Fe–Ti–B-based nanocomposites with Co/C cosubstitution. Scr Mater 56:429–43210.1016/j.scriptamat.2006.10.031 ↗
11. Zhong M, Tao L, Wu T, Zhang Q, Liu R, Zhong Z, UrRehman S (2021) Tailoring the magnetic properties and microstructure of NdFeB ribbon alloys by Hf addition. J Alloys Compds 876:16019710.1016/j.jallcom.2021.160197 ↗
12. Luo J, Liang JK, Guo YQ, Liu QL, Liu FS, Zhang Y, Ynag LT, Rao GH (2005) Effects of the doping element on crystal structure and magnetic properties of Sm(Co, M)7 compounds (M=Si, Cu, Ti, Zr, and Hf). Intermetallics 13:710–716. https://doi.org/10.1016/j.intermet.2004.12.01810.1016/j.intermet.2004.12.018 ↗
13. Chang HW, Huang ST, Chang CW, Chiu CH, Chen IW, Chang WC, Sun AC, Yao YD (2007) Comparison on the magnetic properties and phase evolution of melt-spun SmCo7 ribbons with Zr and Hf substitution. Scr Mater 56:1099–110210.1016/j.scriptamat.2007.02.009 ↗
14. Hsieh CC, Huang ST, Guo JS, Shih CW, Chang WC, Chang HW, Shaw CC (2013) Effect of a carbon additive on the TbCu7-type melt-spun Sm(Co, M)7 (M=Ti, Zr, Hf, V and Ge) ribbons. J Kor Phys Soc 63:401–404. https://doi.org/10.3938/jkps.63.40110.3938/jkps.63.401 ↗
15. Chang HW, Ou WC, Lee YI, Shih CW, Chang WC, Yang CC, Shaw CC (2018) Magnetic properties and microstructure of melt spun YCo5−xMx ribbons (M = C and Sn; x = 0−0.3). J Alloy Compds 747:236–241. https://doi.org/10.1016/j.jallcom.2018.03.02310.1016/j.jallcom.2018.03.023 ↗
16. Strnat KJ (1988) Rare earth-cobalt permanent magnets. Handb Ferromagn Mater 4:131–209
17. Velge WAJJ, Buschow KHJ (1968) Magnetic and Crystallographic Properties of Some Rare Earth Cobalt Compounds with CaZn5 Structure. J Appl Phys 39:1717–172010.1063/1.1656420 ↗
18. McCurrrie RA, Carswell GP, O’Neill JB (1970) The magnetic and mechanical hardness of the intermetallic compounds SmCo5 and LaCo5. J Mater Sci 6:164–16810.1007/BF00550348 ↗
19. Okumura H, Zhang F, Hadjipanayis GC (2002) Magnetic properties and microstructure of LaCo 5-based powders produced by mechanical milling and subsequent annealing. J Appl Phys 91:6147–6153. https://doi.org/10.1063/1.146762810.1063/1.1467628 ↗
20. Tozman P, Venkatesan M, Coey JMD (2014) Development of Hysteresis in Ball-Milled LaCo5−xFex and La2Co7−xFex. IEEE Trans Magn 50:2104904. https://doi.org/10.1109/TMAG.2014.231691410.1109/TMAG.2014.2316914 ↗
21. Shen Y, Turgut Z, Horwath J, Huang M (2011) Bulk nanocomposite LaCo5/LaCo13 magnets. J Appl Phys 109:07A76510.1063/1.3562446 ↗
22. Gabay AM, Hadjipanayis GC (2014) Mechanochemical synthesis of LaCo5 magnetically hard anisotropic powder. J Phys D: Appl Phys 47:182001. https://doi.org/10.1088/0022-3727/47/18/18200110.1088/0022-3727/47/18/182001 ↗
23. Chang HW, Guo YM, Liao SH, Chang WC, Shaw CC (2020) Magnetic property improvement of melt spun LaCo5-based nanocomposites with Y. Fe and C substitutions J Alloys Compds 821:153271. https://doi.org/10.1016/j.jallcom.2019.15327110.1016/j.jallcom.2019.153271 ↗
24. Massalski TB, Okamoto H, Subramanian PR, Kacprzak L (1990) Binary alloy phase diagrams, 2nd. ASM International, Ohio, pp 1050–1261
25. Pathak AK, Khan M, Gschneidner Jr KA, McCallum RW, Zhou L, Sun K, Dennis KW, Zhou C, Pinkerton FE, Kramer MJ, Pecharsky VK (2015) Cerium: an unlikely replacement of dysprosium in high performance Nd–Fe–B permanent magnets. Adv Mater 27:2663–2667. https://doi.org/10.1002/adma.20140489210.1002/adma.201404892 ↗
26. Alam A, Khan M, McCallum RW, Johnson DD (2013) Site-preference and valency for rare-earth sites in (R-Ce)2Fe14B magnets. Appl Phys Lett 102:04240210.1063/1.4789527 ↗
27. Zuo WL, Mohapatra J, Liu JP, Zhao TY, Hu FX, Sun JR, Shen BG (2019) Cerium-based R Co5 (R= Ce, La0, 35Ce0 65, and misch-metal) type nanocrystalline hard magnetic materials with high coercivity. APL Mater 7(9):09110810.1063/1.5104295 ↗
28. Kumar S, Patrick CE, Edwards RS, Balakrishnan G, Lees MR, Staunton JB (2020) Torque magnetometry study of the spin reorientation transition and temperature-dependent magnetocrystalline anisotropy in NdCo5. J Phys Condens Matter 32:25580210.1088/1361-648X/ab7ad6 ↗
29. Akiya T, Liu J, Sepehri-Amin H, Ohkubo T, Hioki K, Hattori A, Hono K (2014) High-coercivity hot-deformed Nd–Fe–B permanent magnets processed by Nd–Cu eutectic diffusion under expansion constraint. Scr Mater 81:48–5110.1016/j.scriptamat.2014.03.002 ↗
30. Magnetic properties measured at various high temperatures of sintered Neodymium-Iron-Boron Magnets with N40EH level fabricated by Arnold magnetic technologies. https://www.arnoldmagnetics.com/wp-content/uploads/2017/11/N40EH-151021.pdf