Synthesis, physicochemical, and antimicrobial characteristics of novel poly(urethane-siloxane) network/silver ferrite nanocomposites
Source abstract
Abstract
In situ polymerization was used to produce novel AgFeO2"PEG/polyurethane network nanocomposites (NP-PUs) with 30-60 wt% of soft poly(dimethylsiloxane) segments in polyurethane (PU), containing 1 wt% of PEG-coated AgFeO2 nanoparticles, AgFeO2"PEG. Physicochemical properties and in vitro biological activity of the NP-PUs were systematically evaluated in terms of AgFeO2"PEG (NP) addition and soft segment content. High-angle annular dark-field transmission electron microscopy showed that the nanoparticles were generally uniformly distributed in the PU matrix. Increased soft segment content caused significantly increased intensity of the broad, amorphous X-ray diffraction peaks of crystalline AgFeO2, probably because the chemical composition of PU affected the distribution of nanoparticles. The Young modulus, hardness, and plasticity of the NP-PUs were higher than for pure PU and increased with decreasing soft segment content. Decreased soft segment content induced higher microphase separation, increased hydrophilicity and swelling ability, but decreased cross-linking density. Additionally, NP-PUs had higher glass transition temperatures, improved thermal stability, and enhanced nanomechanical performance over pure PU. The NP-PUs demonstrated good selective inhibition of Candida albicans and Candida parapsilosis (30-55%) and no pronounced cytotoxicity to MRC5 human lung fibroblasts. Among the investigated AgFeO2"PEG/PUs, the best antifungal activity was shown by composites with 30 and 40 wt% soft segments. Consequently, the novel AgFeO2"PEG/polyurethane network nanocomposites could be further optimized to be used as biocompatible surfaces that also prevent formation of fungal biofilms. [GRAPHICS] .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Polymer composites and self-healing · Antimicrobial agents and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Vermette R, Griesser HJ, Laroche G, Guidoin R (2001) Biomedical Applications of polyurethanes. Landes Bioscience, Austin, TX
2. Leroux F, Troutier AL (2009) Polyurethane Nanocomposites. In: Thomas S, Zaikov GE, Valsaraj SV (eds) Recent advances in polymer nanocomposites. CRC Press, Boca Raton, pp 181–22610.1163/ej.9789004167261.i-528.60 ↗
3. Yilgor I, Yilgor E, Wilkes GL (2015) Critical parameters in designing segmented polyurethanes and their effect on morphology and properties: a comprehensive review. Polymer 58:A1–A36. https://doi.org/10.1016/j.polymer.2014.12.01410.1016/j.polymer.2014.12.014 ↗
4. Chattopadhya DK, Raju KVSN (2007) Structural engineering of polyurethane coatings for high performance applications. Prog Polym Sci 32:352–418. https://doi.org/10.1016/j.progpolymsci.2006.05.00310.1016/j.progpolymsci.2006.05.003 ↗
5. Yilgör I, McGrath JE (1988) Polysiloxane containing copolymers: a survey of recent developments. Adv Polym Sci 86:1–86. https://doi.org/10.1007/BFb002527410.1007/BFb0025274 ↗
6. Li N, Yue X, Zhang L, Wang K, Zhang J, Zhang Z, Dang F (2019) Versatile antifouling coatings based on self-assembled oligopeptides for engineering and biological materials. J Mater Chem B 7:2242–2246. https://doi.org/10.1039/C9TB00084D10.1039/C9TB00084D ↗
7. Dvornic PR, Lenz RW (1990) High temperature siloxane elastomers. Hüthing & Wepf, Heidelberg and New York
8. Hernandez R, Weksler J, Padsalgika A, Runt J (2008) In vitro oxidation of high polydimethylsiloxane content biomedical polyurethanes: correlation with the microstructure. J Biomed Mater Res A 87:546–556. https://doi.org/10.1002/jbm.a.3182310.1002/jbm.a.31823 ↗
9. Czech P, Okrasa L, Boiteux G, Mechin F, Ulanski J (2005) Polyurethane networks based on hyperbranched polyesters: synthesis and molecular relaxations. J Non-Cryst Sol 351:2735–2741. https://doi.org/10.1016/j.jnoncrysol.2005.05.03810.1016/j.jnoncrysol.2005.05.038 ↗
10. Maji PK, Bhowmick AK (2013) Structure–property correlation of polyurethane nanocomposites: influence of loading and nature of nanosilica and microstructure of hyperbranched polyol. J Appl Polym Sci 127:4492–4504. https://doi.org/10.1002/app.3806310.1002/app.38063 ↗
11. Mishra K, Narayan R, Raju KVSN, Aminabhavi TM (2012) Hyperbranched polyurethane (HBPU)-urea and HBPU-imide coatings: Effect of chain extender and NCO/OH ratio on their properties. Prog Org Coat 74:134–141. https://doi.org/10.1016/j.porgcoat.2011.11.02710.1016/j.porgcoat.2011.11.027 ↗
12. Žagar E, Huskić M, Žigon M (2007) Structure-to-properties relationship of aliphatic hyperbranched polyesters. Macromol Chem Phys 208:1379–1387. https://doi.org/10.1002/macp.20060067210.1002/macp.200600672 ↗
13. Žagar E, Žigon M (2011) Aliphatic hyperbranched polyesters based on 2,2-bis(methylol)propionic acid—Determination of structure, solution and bulk properties. Prog Polym Sci 36:53–88. https://doi.org/10.1016/j.progpolymsci.2010.08.00410.1016/j.progpolymsci.2010.08.004 ↗
14. Maji PK, Bhowmick AK (2009) Influence of number of functional groups of hyperbranched polyol on cure kinetics and physical properties of polyurethanes. J Polym Sci Polym Chem 47:731–745. https://doi.org/10.1002/pola.2318510.1002/pola.23185 ↗
15. Czech P, Okrasa L, Ulanski J, Boiteux G, Mechin F, Cassagnau P (2007) Studies of the molecular dynamics in polyurethane networks with hyperbranched crosslinkers of different coordination numbers. J Appl Polym Sci 105:89–98. https://doi.org/10.1002/app.2610610.1002/app.26106 ↗
16. Asif A, Shi W, Shen X, Nie K (2005) Physical and thermal properties of UV curable waterborne polyurethane dispersions incorporating hyperbranched aliphatic polyester of varying generation number. Polymer 46:11066–11078. https://doi.org/10.1016/j.polymer.2005.09.04610.1016/j.polymer.2005.09.046 ↗
17. Pergal MV, Džunuzović JV, Poręba R, Ostojić S, Radulović A, Špírková M (2013) Microstructure and properties of poly(urethane-siloxane)s based on hyperbranched polyester of the fourth pseudo generation. Prog Org Coat 76:743–756. https://doi.org/10.1016/j.porgcoat.2013.01.00710.1016/j.porgcoat.2013.01.007 ↗
18. Pergal MV, Džunuzović JV, Poręba R, Steinhart M, Pergal MM, Vodnik VV, Špírková M (2013) Structure–property correlation study of novel poly(urethane–ester–siloxane) networks. Ind Eng Chem Res 52:6164–6176. https://doi.org/10.1021/ie400467j10.1021/ie400467j ↗
19. Džunuzović JV, Pergal MV, Poręba R, Vodnik V, Simonović BR, Špírková M, Jovanović S (2012) Analysis of dynamic mechanical, thermal and surface properties of poly(urethane-ester-siloxane) networks based on hyperbranched polyester. J Non-Crst Sol 358:3161–3169. https://doi.org/10.1016/j.jnoncrysol.2012.09.01310.1016/j.jnoncrysol.2012.09.013 ↗
20. Saidin S, Jumat MA, Mohd Amin NAA, Saleh Al-Hammadi AS (2021) Organic and inorganic antibacterial approaches in combating bacterial infection for biomedical application. Mater Sci Eng C 118:1–18. https://doi.org/10.1016/j.msec.2020.11138210.1016/j.msec.2020.111382 ↗
21. Pugazhedhi A, Vasantharaj S, Sathiyavimal S, Raja RK, Karuppusamy I, Narayanan M, Kandasamy S, Brindhadevi K (2021) Organic and inorganic nanomaterial coatings for the prevention of microbial growth and infections on biotic and abiotic surfaces. Surf Coat Technol 425:1–11. https://doi.org/10.1016/j.surfcoat.2021.12773910.1016/j.surfcoat.2021.127739 ↗
22. Eleraky NE, Allam AH, Sahar B, Omar MM (2020) Nanomedicine fight against antibacterial resistance: an overview of the recent pharmaceutical innovations. Pharmaceutics 12:1–49. https://doi.org/10.3390/pharmaceutics1202014210.3390/pharmaceutics12020142 ↗
23. Rashti A, Yahyaei H, Firoozi S, Ramezani S, Rahiminejad A, Karimi R, Farzaneh K, Mohseni M, Ghanbari H (2016) Development of novel biocompatible hybrid nanocomposites based on polyurethane-silica prepared by sol gel process. Mater Sci Eng C 69:1248–1255. https://doi.org/10.1016/j.msec.2016.08.03710.1016/j.msec.2016.08.037 ↗
24. Hsu S-H, Tseng H-J, Lin Y-C (2010) The biocompatibility and antibacterial properties of waterborne polyurethane-silver nanocomposites. Biomaterials 31:6796–6808. https://doi.org/10.1016/j.biomaterials.2010.05.01510.1016/j.biomaterials.2010.05.015 ↗
25. Valenzuela L, Iglesias-Juez A, Bachiller-Baeza B, Faraldos M, Bahamonde A, Rosal R (2020) Biocide mechanism of highly efficient and stable antimicrobial surfaces based on zinc oxide–reduced graphene oxide photocatalytic coatings. J Mater Chem B 8:8294–8304. https://doi.org/10.1039/D0TB01428A10.1039/D0TB01428A ↗
26. Rajendran V, Dhineshbabu NR, Kanna RR, Kaler KVIS (2014) Enhancement of thermal stability, flame retardancy, and antimicrobial properties of cotton fabrics functionalized by inorganic nanocomposites. Ind Eng Chem Res 53:19512–19524. https://doi.org/10.1021/ie502584m10.1021/ie502584m ↗
27. Zhao B, Jia R, Zhang Y, Liu D, Zheng X (2019) Design and synthesis of antibacterial waterborne fluorinated polyurethane. J Appl Polym Sci 136:1–11. https://doi.org/10.1002/app.4692310.1002/app.46923 ↗
28. Du S, Wang Y, Zhang C, Deng X, Luo X, Fu Y, Liu Y (2018) Self-antibacterial UV-curable waterborne polyurethane with pendant amine and modified by guanidinoacetic acid. J Mater Sci 53:215–229. https://doi.org/10.1007/s10853-017-1527-210.1007/s10853-017-1527-2 ↗
29. Malay O, Oguz O, Kosak C, Yilgor E, Yilgor I, Menceloglu YZ (2013) Polyurethaneurea–silica nanocomposites: preparation and investigation of the structure–property behavior. Polymer 54:5310–5320. https://doi.org/10.1016/j.polymer.2013.07.04310.1016/j.polymer.2013.07.043 ↗
30. Poręba R, Špírková M, Brožová L, Lazić N, Pavličević J, Strachota A, (2013) Aliphatic polycarbonate-based polyurethane elastomers and nanocomposites. II. Mechanical, thermal and gas transport properties. J Appl Polym Sci 127:329–341. https://doi.org/10.1002/app.3789510.1002/app.37895 ↗
31. Xiong J, Zheng Z, Jiang H, Ye S, Wang X (2007) Reinforcement of polyurethane composites with an organically modified montmorillonite. Composites A 38:132–137. https://doi.org/10.1016/j.compositesa.2006.01.01410.1016/j.compositesa.2006.01.014 ↗
32. Špírková M, Pavličević J, Costumbre YA, Hodan J, Krejčíková S, Brožová L (2020) Novel waterborne poly(urethane-urea)/silica nanocomposites. Polym Comp 41:4031–4042. https://doi.org/10.1002/pc.2569010.1002/pc.25690 ↗
33. Cao X, Lee LJ, Widya T, Macosco C (2005) Polyurethane/clay nanocomposites foams: processing, structure and properties. Polymer 46:775–783. https://doi.org/10.1016/j.polymer.2004.11.02810.1016/j.polymer.2004.11.028 ↗
34. Choi SH, Kim DH, Raghu AV, Reddy KR, Lee HI, Yoon KS, Jeong HM, Kim BK (2012) Properties of graphene/waterborne polyurethane nanocomposites cast from colloidal dispersion mixtures. J Macromol Sci B: Phys 51:197–207. https://doi.org/10.1080/00222348.2011.58319310.1080/00222348.2011.583193 ↗
35. Kuan HC, Ma CCM, Chang WP, Yuen SM, Wu HH, Lee TM (2005) Synthesis, thermal, mechanical and rheological properties of multiwall carbon nanotube/waterborne polyurethane nanocomposite. Compos Sci Technol 65:1703–1710. https://doi.org/10.1016/j.compscitech.2005.02.01710.1016/j.compscitech.2005.02.017 ↗
36. Chou CV, Hsu SH, Chang H, Tseng SM, Lin HR (2006) Enhanced thermal and mechanical properties and biostability of polyurethane containing silver nanoparticles. Polym Degrad Stabil 91:1017–1024. https://doi.org/10.1016/j.polymdegradstab.2005.08.00110.1016/j.polymdegradstab.2005.08.001 ↗
37. Charpentier PA, Burgess K, Wang L, Chowdhury RR, Lotus AF, Moula G (2012) Nano-TiO2/polyurethane composites for antibacterial and self-cleaning coatings. Nanotechnology 23:1–9. https://doi.org/10.1088/0957-4484/23/42/42560610.1088/0957-4484/23/42/425606 ↗
38. Das B, Mandal M, Upadhyay A, Chattopadhyay P, Karak N (2013) Bio-based hyperbranched polyurethane/Fe3O4 nanocomposites: smart antibacterial biomaterials for biomedical devices and implants. Biomed Mater 8:1–12. https://doi.org/10.1088/1748-6041/8/3/03500310.1088/1748-6041/8/3/035003 ↗
39. Riaz U, Ashraf SM, Jadoun S, Iqbal A, Ahmad S (2018) Silver ferrite and cobalt ferrite dispersed castor oil polyurethane nanocomposites: quenching studies of bovine serum albumin. Int J Polym Mater 67:925–933. https://doi.org/10.1080/00914037.2017.139368310.1080/00914037.2017.1393683 ↗
40. Gupta AK, Gupta M (2005) Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications. Biomaterials 26:3995–4021. https://doi.org/10.1016/j.biomaterials.2004.10.01210.1016/j.biomaterials.2004.10.012 ↗
41. Gao J, Gu H, Xu B (2009) Multifunctional magnetic nanoparticles: Design, synthesis, and biomedical applications. Acc Chem Res 42:1097–1107. https://doi.org/10.1021/ar900002610.1021/ar9000026 ↗
42. Hao R, Xing R, Xu Z, Hou Y, Gao S, Sun S (2010) Synthesis, functionalization, and biomedical applications of multifunctional magnetic nanoparticles. Adv Mater 22:2729–2742. https://doi.org/10.1002/adma.20100026010.1002/adma.201000260 ↗
43. Açıkalın E, Atıcı O, Sayıntı A, Çobana K, Erkalfa H (2013) Preparation of dendritic waterborne polyurethane-urea/Ni–Zn ferrite composite coatings and investigation of their microwave absorption properties. Prog Org Coat 76:972–978. https://doi.org/10.1016/j.porgcoat.2012.10.00810.1016/j.porgcoat.2012.10.008 ↗
44. Chen S, Chen S, Zhao G, Chen J (2015) Fabrication and properties of novel superparamagnetic, well–dispersed waterborne polyurethane/Ni–Zn ferrite nanocomposites. Compos Sci Technol 119:108–114. https://doi.org/10.1016/j.compscitech.2015.09.02010.1016/j.compscitech.2015.09.020 ↗
45. Agarwal K, Prasad M, Katiyar M, Kumar R, Prasad NE (2019) Preparation and characterization of Ni0.5Zn0.5Fe2O4 + polyurethane nanocomposites using melt mixing method. SILICON 11:1035–1045. https://doi.org/10.1007/s12633-018-9900-610.1007/s12633-018-9900-6 ↗
46. Hsu S, Tang CM, Tseng HJ (2008) Gold nanoparticles induce surface morphological transformation in polyurethane and affect the cellular response. Biomacromol 9:241–248. https://doi.org/10.1021/bm700471k10.1021/bm700471k ↗
47. Prabhakar PK, Raj S, Anuradha PR, Sawant SN, Doble M (2011) Biocompatibility studies on polyaniline and polyaniline–silver nanoparticle coated polyurethane composite. Coll Surf B Biointerfaces 86:146–153. https://doi.org/10.1016/j.colsurfb.2011.03.03310.1016/j.colsurfb.2011.03.033 ↗
48. Nguyen-Tri P, Nguyen VT, Nguyen TA (2019) Biological activity and nanostructuration of Fe3O4-Ag/high density polyethylene nanocomposites. J Compos Sci 3:1–14. https://doi.org/10.3390/jcs302003410.3390/jcs3020034 ↗
49. Ngo TD, Le Hanh TM, Nguyen TH, Nguyen TV, Nguyen TA, Le Lu T, Nguyen TT, Van Tran TT, Le Thao TB, Hai Doan N (2016) Antibacterial nanocomposites based on Fe3O4–Ag hybrid nanoparticles and natural rubber-polyethylene blends. Int J Polym Sci 2016:1–9. https://doi.org/10.1155/2016/747816110.1155/2016/7478161 ↗
50. Chudasama B, Vala AK, Andhariya N, Upadhyay RV, Mehta RV (2009) Enhanced antibacterial activity of bifunctional Fe3O4-Ag core-shell nanostructures. Nano Res 2:955–965. https://doi.org/10.1007/s12274-009-9098-410.1007/s12274-009-9098-4 ↗
51. Quang DV, Sarawade PB, Hilonga A, Kim J-K, Chai YG, Kim SH, Ryu J-Y, Kim HT (2011) Preparation of silver nanoparticle containing silica micro beads and investigation of their antibacterial activity. Appl Surf Sci 257:6963–6970. https://doi.org/10.1016/j.apsusc.2011.03.04110.1016/j.apsusc.2011.03.041 ↗
52. Tung LM, Cong NX, Huy LT, Lan NT, Phan VN, Hoa NQ, Vinh LK, Thinh NV, Tai LT, Ngo D-T, Mølhave K, Huy TQ, Le AT (2016) Synthesis, characterizations of superparamagnetic Fe3O4-Ag hybrid nanoparticles and their application for highly effective bacteria inactivation. J Nanosci Nanotechnol 16:5902–5912. https://doi.org/10.1166/jnn.2016.1102910.1166/jnn.2016.11029 ↗
53. Pergal MV, Brkljacic J, Tovilovic-Kovacevic G, Špírková M, Kodranov ID, Manojlovic DD, Ostojic S, Knezevic NZ (2021) Effect of mesoporous silica nanoparticles on the properties of polyurethane network composites. Prog Org Coat 151:1–13. https://doi.org/10.1016/j.porgcoat.2020.10604910.1016/j.porgcoat.2020.106049 ↗
54. Marand A, Dahlin J, Karlsson D, Skarping G, Dalene M (2004) Determination of technical grade isocyanates used in the production of polyurethane plastics. J Environ Monit 6:606–614. https://doi.org/10.1039/B402775B10.1039/B402775B ↗
55. Flory PJ, Rehner JH (1943) Statistical mechanics of cross-linked polymer networks II. swelling. J Chem Phys 11(11):521. https://doi.org/10.1063/1.172379210.1063/1.1723792 ↗
56. Ghaheh FS, Mortazavi SM, Alihosseini F, Fassihi A, Nateri AS, Abedi D (2014) Assessment of antibacterial activity of wool fabrics dyed with natural dyes. J Clean Prod 72:139–145. https://doi.org/10.1016/j.jclepro.2014.02.05010.1016/j.jclepro.2014.02.050 ↗
57. Hansen MB, Nielsen SE, Berg K (1989) Re-examination and further development of a precise and rapid dye method for measuring cell growth/cell kill. J Immunol Methods 119:203–210. https://doi.org/10.1016/0022-1759(89)90397-910.1016/0022-1759(89)90397-9 ↗
58. Jaiswal M, Koul V (2013) Assessment of multicomponent hydrogel scaffolds of poly(acrylic acid-2-hydroxy ethyl methacrylate)/gelatin for tissue engineering applications. J Biomater Appl 27:848–861. https://doi.org/10.1177/088532821142852410.1177/0885328211428524 ↗
59. Ponjavic M, Nikolic MS, Stevanovic S, Nikodinovic-Runic J, Jeremic S, Pavic A, Djonlagic J (2020) Hydrolytic degradation of star-shaped poly(epsilon-caprolactone)s with different number of arms and their cytotoxic effects. J Bioact Compat Polym 35:517–537. https://doi.org/10.1177/088391152095182610.1177/0883911520951826 ↗
60. Marković D, Vasiljević J, Ašanin J, Ilic-Tomic T, Tomšič B, Jokić B, Mitrić M, Simončič B, Mišić D, Radetić M (2020) The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions. J Appl Polym Sci 137:1–12. https://doi.org/10.1002/app.4919410.1002/app.49194 ↗
61. Hosseini SM, Hosseini-Monfared H, Abbasi V, Khoshroo MR (2016) Selective oxidation of hydrocarbons under air using recoverable silver ferrite–graphene (AgFeO2–G) nanocomposite: a good catalyst for green chemistry. Inorg Chem Commun 67:72–79. https://doi.org/10.1016/j.inoche.2016.03.01110.1016/j.inoche.2016.03.011 ↗
62. Pergal MV, Antić VV, Tovilović G, Nestorov J, Vasiljević-Radović D, Djonlagić J (2012) In vitro biocompatibility evaluation of novel urethane–siloxane copolymers based on poly(ε-caprolactone)-block-poly(dimethylsiloxane)-block-poly(ε-caprolactone). J Biomat Sci Polym Edn 23:1629–1657. https://doi.org/10.1163/092050611x58933810.1163/092050611x589338 ↗
63. Pavličević J, Špirkova M, Jovičić M, Budinski-Simendić J, Pilić B, Baloš S, Bera O (2019) Structure—functional property relationship of aliphatic polyurethane-silica hybrid films. Prog Org Coat 126:62–74. https://doi.org/10.1016/j.porgcoat.2018.10.01110.1016/j.porgcoat.2018.10.011 ↗
64. Zhang J, Pu HuC (2008) Synthesis, characterization and mechanical properties of polyester-based aliphatic polyurethane elastomers containing hyperbranched polyester segments. Eur Polym J 44:3708–3714. https://doi.org/10.1016/j.eurpolymj.2008.08.01910.1016/j.eurpolymj.2008.08.019 ↗
65. Lligadas G, Ronda JC, Galià M, Cádiz V (2007) Polyurethane networks from fatty-acid-based aromatic triols: synthesis and characterization. Biomacromol 8:1858–1864. https://doi.org/10.1021/bm070157k10.1021/bm070157k ↗
66. Chen S, Jin T, Wu W, Zhao G (2016) Novel environmentally friendly waterborne polyurethane/hollow Ni0.3Zn0.5Fe2O4 nanocomposite films: superior magnetic and mechanical properties. RSC Adv 6:75440–75448. https://doi.org/10.1039/C6RA11937A10.1039/C6RA11937A ↗
67. Greenwood JA, Williamson JBP (1966) Contact of nominally flat surfaces. Proc Math Phys Eng Sci 295:300–319. https://doi.org/10.1098/rspa.1966.024210.1098/rspa.1966.0242 ↗
68. Tanaka K (1987) Elastic/plastic indentation hardness and indentation fracture toughness: the inclusion core model. J Mater Sci 22:1501–1508. https://doi.org/10.1007/BF0123315410.1007/BF01233154 ↗
69. Yu JW, Jung J, Choi Y-M, Choi JH, Yu J, Lee JK, You N-H, Goh M (2016) Enhancement of the crosslink density, glass transition temperature, and strength of epoxy resin by using functionalized graphene oxide co-curing agents. Polym Chem 7:36–43. https://doi.org/10.1039/C5PY01483B10.1039/C5PY01483B ↗
70. Xu C-A, Nan B, Lu M, Qu Z, Tan Z, Wu K, Shi J (2020) Effects of polysiloxanes with different molecular weights on in vitro cytotoxicity and properties of polyurethane/cotton–cellulose nanofiber nanocomposite films. Polym Chem 11:5225–5237. https://doi.org/10.1039/D0PY00809E10.1039/D0PY00809E ↗
71. Liu M, Liu T, Chen X, Yang J, Deng J, He W, Zhang X, Lei Q, Hu X, Luo G, Wu J (2018) Nano-silver-incorporated biomimetic polydopamine coating on a thermoplastic polyurethane porous nanocomposite as an efficient antibacterial wound dressing. J Nanobiotechnol 16:1–19. https://doi.org/10.1186/s12951-018-0416-410.1186/s12951-018-0416-4 ↗
72. Damm C, Münstedt H, Rösch A (2008) The antimicrobial efficacy of polyamide 6/silver-nano- and microcomposites. Mater Chem Phys 108:61–66. https://doi.org/10.1016/j.matchemphys.2007.09.00210.1016/j.matchemphys.2007.09.002 ↗
73. Ajili SH, Ebrahimi NG, Soleimani M (2009) Polyurethane/polycaprolactane blend with shape memory effect as a proposed material for cardiovascular implants. Acta Biomater 5:1519–1530. https://doi.org/10.1016/j.actbio.2008.12.01410.1016/j.actbio.2008.12.014 ↗
74. Moraes C, Kagoma YK, Beca BM, Tonelli-Zasarsky RL, Sun Y, Simmons CA (2009) Integrating polyurethane culture substrates into poly(dimethylsiloxane) microdevices. Biomaterials 30:5241–5250. https://doi.org/10.1016/j.biomaterials.2009.05.06610.1016/j.biomaterials.2009.05.066 ↗
75. Wang M-C, Lin J-J, Tseng H-J, Hsu S-H (2012) Characterization, antimicrobial activities, and biocompatibility of organically modified clays and their nanocomposites with polyurethane. ACS Appl Mater Interfaces 4:338–350. https://doi.org/10.1021/am201410310.1021/am2014103 ↗
76. Tolstov AL (2014) Studying an effect of polyurethane functionality directed stabilization of silver nanoparticles as a pathway for manufacturing modern antimicrobial materials. Proc Int Conf Nanomater: Appl Prop 3:1–4
77. Woźniak A, Malankowska A, Nowaczyk G, Grześkowiak TK, Słomski R, Zaleska-Medynska A, Jurga S (2017) Size and shape-dependent cytotoxicity profile of gold nanoparticles for biomedical applications. J Mater Sci Mater Med 28:1–11. https://doi.org/10.1007/s10856-017-5902-y10.1007/s10856-017-5902-y ↗
78. Sohaebuddin SK, Thevenot PT, Baker D, Eaton JW, Tang L (2010) Nanomaterial cytotoxicity is composition, size, and cell type dependent. Part Fibre Toxicol 7:1–17. https://doi.org/10.1186/1743-8977-7-2210.1186/1743-8977-7-22 ↗
79. Peng H, Zhang Y, Wei Y, Liu W, Li S, Yu G, Fu X, Cao T, Deng X (2012) Cytotoxicity of silver nanoparticles in human embryonic stem cell-derived fibroblasts and an L-929 cell line. J Nanomater 2012:1–9. https://doi.org/10.1155/2012/16014510.1155/2012/160145 ↗
80. Sadu RB, Chen DH, Kucknoor AS, Guo Z, Gomes AJ (2014) Silver-doped TiO2/polyurethane nanocomposites for antibacterial textile coating. BioNanoSci 4:136–148. https://doi.org/10.1007/s12668-014-0125-x10.1007/s12668-014-0125-x ↗
81. Lara HH, Romero-Urbina DG, Pierce C, Lopez-Ribot JL, Arellano-Jimènez MJ, Jose-Yacaman M (2015) Effect of silver nanoparticles on Candida albicans biofilms: an ultrastructural study. J Nanobiotechnol 13:1–12. https://doi.org/10.1186/s12951-015-0147-810.1186/s12951-015-0147-8 ↗
82. Monteiro DR, Takamiya AS, Feresin LP, Gorup LF, de Camargo ER, Delbem ACB, Henriques M, Barbosa DB (2014) Silver colloidal nanoparticle stability: influence on Candida biofilms formed on denture acrylic. Med Mycol 52:627–635. https://doi.org/10.1093/mmy/myu02110.1093/mmy/myu021 ↗
83. Yin IX, Zhang J, Zhao IS, Mei ML, Li Q, Chu CH (2020) The antibacterial mechanism of silver nanoparticles and its application in dentistry. Int J Nanomed 15:2555–2562. https://doi.org/10.2147/IJN.S24676410.2147/IJN.S246764 ↗
84. Feng QL, Wu J, Chen GQ, Cui FZ, Kim TN, Kim JO (2000) A mechanistic study of the antibacterial effect of silver ions on Escherichia coli and Staphylococcus aureus. J Biomed Mater Res 52:662–668. https://doi.org/10.1002/1097-4636(20001215)52:4<662::aid-jbm10>3E3.0.co;2-310.1002/1097-4636(20001215)52:4<662::aid-jbm10>3E3.0.co;2-3 ↗