journal article·2003-03

Alumina coating on quartz glass and nickel substrates using aqueous sol derived from AlCl3 · 6H2O

T. Ishizaka, Y. Kobayashi, Y. Kurokawa

Journal of Materials Science· Volume 38· Issue 6
Publisher page

Abstract

The thick alumina films (0.2–0.5 μm) were prepared on quartz glass and nickel substrates by a dipping method using an alumina sol derived from an aqueous AlCl3 solution. The hardness of this coating was compared to those of similarly coated substrates that had been heat-treated at various temperatures. The hardness of the alumina coating increased with increasing heat-treatment temperature. This sol gave crack-free and well-coated substrates that could be heat-treated to temperatures up to 800°C. This may have been due to the formation of an amorphous mixed oxide interface layer between the alumina films and the substrates. At temperatures higher than 900°C, problems with the coating started to appear because the oxide layer formed into α-alumina accompanying evolution of stress in the interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. M. Guglielmi, J. Sol-Gel Sci. Tech. 8 (1997) 443.10.1023/A:1018373404815 ↗
2. M. SimÕes, O. B. G. Assis and L. A. Avaca, J. Non-Cryst. Solids 273 (2000) 159.10.1016/S0022-3093(00)00161-7 ↗
3. D. C. L. Vasconcelos, J. A. N. Carvalho, M. Mantel and W. L. Vasconcelos, ibid. 273 (2000) 135.10.1016/S0022-3093(00)00155-1 ↗
4. Y. Kurokawa, Y. Kobayashi and S. Nakata, Hetero. Chem. Rev. 1 (1994) 309.
5. T. Ishizaka and Y. Kurokawa, J. Appl. Phys. 90 (2001) 2257.10.1063/1.1391221 ↗
6. T. Ishizaka, R. Nozaki and Y. Kurokawa, J. Phys. Chem. Solids 63 (2001) 613.10.1016/S0022-3697(01)00201-3 ↗
7. Y. Kurokawa, T. Suga, S. Nakata, T. Ikoma and S. Tero-Kubota, J. Mater. Sci. Lett. 17 (1998) 275.10.1023/A:1006517219037 ↗
8. L. Campaniello, P. Berthet, F. D'Yvoire and A. Revcolevschi, J. Mater. Res. 10 (1995) 297.10.1557/JMR.1995.0297 ↗
9. N. Özer, J. P. Cronin, Y.-J. Yao and A. P. Tomsia, Solar Energy Materials &; Solar Cells 59 (1999) 355.10.1016/S0927-0248(99)00054-9 ↗
10. R. Hauk, G. H. Frischat and K. Ruppert, Glastech. Ber. Glass Sci. Technaol. 72 (1999) 386.
11. J. Masalski, J. Gluszek, J. Zabreshi, K. Nitsch and P. Gluszek, Thin Solid Films 349 (1999) 186.10.1016/S0040-6090(99)00230-8 ↗
12. B. E. Yoldas, J. Non-Cryst. Solids 147/148 (1992) 614.10.1016/S0022-3093(05)80686-6 ↗
13. W. H. Gitzen, “Alumina as a Ceramic Material” (The Amer. Ceram. Soc., Columbus, OH, 1974) p. 17.
14. K. Miyazawa, K. Itoi and T. Sakuma, J. Japan Inst. Metals 55 (1991) 1345.10.2320/jinstmet1952.55.12_1345 ↗
15. Y. Wang, E. Akiyama, H. Habazaki, A. Kawasima, K. Asami and K. Hasimoto, Zairyoto-kankyo 42 (1993) 158.10.3323/jcorr1991.42.158 ↗
16. M. Krumova, C. Klingshirn, F. Haupert and K. Friedrich, Comp. Sci. Technol. 61 (2001) 557.10.1016/S0266-3538(00)00228-1 ↗