journal article·2021-10

The influences of multiple factors for flexural performance of polypropylene: crystallization, crystal evolution, nanoparticles

Weihua Wang, Wei Zhang, Bo Liang

Journal of Materials Science· Volume 56· Issue 28
Publisher page

Abstract

The flexural performance was selected as the characterization index to systematically reveal the influence mechanism of various factors on the strength and rigidity of composites. The results showed that the crystallinity and crystal uniformity of polypropylene were significantly improved under a small amount of nucleating agent, and the resistance to crack propagation and coordination of force transfer were enhanced. With the increase in mold temperature, the flexural strength and flexural modulus were firstly increased and then decreased. Meanwhile, the mold temperature at which the flexural modulus of plastic part began to decrease was prior to that at which the maximum flexural strength was reached. Moreover, the proportion of rigid segments and the uniformity of crystallization in the system were obviously elevated under high-temperature annealing, and the highest crystal diffraction intensity was obtained at the annealing time of about 60 min. Additionally, nanosilica can further strengthen the composites by increasing the radial compressive stress of the interface between the fiber and the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Silicone and Siloxane Chemistry · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Srinivasan T, Palanikumar K, Rajagopal K, Latha B (2017) Optimization of delamination factor in drilling GFR-polypropylene composites. Mater Manuf Process 32:226–233. https://doi.org/10.1080/10426914.2016.115103810.1080/10426914.2016.1151038 ↗
2. Cai LL, Dou Q (2017) Investigation on the melting and crystallization behaviors, mechanical properties and morphologies of polypropylene/sericite composites. J Mater Sci 54:3600–3618. https://doi.org/10.1007/S10853-018-3049-Y10.1007/S10853-018-3049-Y ↗
3. Sobczak L, Jerabek M, Lummerstorfer T, Salaberger D, Renner K, Haider A (2019) Pseudo-ductile behavior of poly(vinyl alcohol) fiber-reinforced polypropylene. Polym Composite 40:4067–4078. https://doi.org/10.1002/PC.2526810.1002/PC.25268 ↗
4. Essabir H, Bensalah MO, Rodrigue D, Bouhfid R, Qaiss AEK (2017) A comparison between bio- and mineral calcium carbonate on the properties of polypropylene composites. Constr Build Mater 134:549–555. https://doi.org/10.1016/j.conbuildmat.2016.12.19910.1016/j.conbuildmat.2016.12.199 ↗
5. Jiang J, Liu X, Lian M et al (2018) Self-reinforcing and toughening isotactic polypropylene via melt sequential injection molding. Polym Test 67:183–189. https://doi.org/10.1016/j.polymertesting.2018.03.00510.1016/j.polymertesting.2018.03.005 ↗
6. Merabet S, Rouabah F, Fois M (2019) Heat treatment of isotactic polypropylene: the effect of free quenching from the melt state. Int J Polym Anal Ch 24:313–325. https://doi.org/10.1080/1023666X.2019.159461910.1080/1023666X.2019.1594619 ↗
7. Do Nascimento EM, Eiras D, Pessan LA (2016) Effect of thermal treatment on impact resistance and mechanical properties of polypropylene/calcium carbonate nanocomposites. Compos Part B-Eng 91:228–234. https://doi.org/10.1016/j.compositesb.2015.12.04010.1016/j.compositesb.2015.12.040 ↗
8. Horváth F, Gombár T, Varga J, Menyhárd A (2017) Crystallization, melting, supermolecular structure and properties of isotactic polypropylene nucleated with dicyclohexyl-terephthalamide. J Therm Anal Calorim 128:925–935. https://doi.org/10.1007/s10973-016-6057-710.1007/s10973-016-6057-7 ↗
9. Sowinski P, Piorkowska E, Boyer SAE, Haudin JM (2018) On the structure and nucleation mechanism in nucleated isotactic polypropylene crystallized under high pressure. Polymer 151:179–186. https://doi.org/10.1016/j.polymer.2018.07.05610.1016/j.polymer.2018.07.056 ↗
10. Notta-Cuvier D, Nciri M, Lauro F, Delille R, Chaari F, Robache F, Haugou G, Maalej Y (2016) Coupled influence of strain rate and heterogeneous fibre orientation on the mechanical behaviour of short-glass-fibre reinforced polypropylene. Mech Mater 100:186–197. https://doi.org/10.1016/j.mechmat.2016.06.01310.1016/j.mechmat.2016.06.013 ↗
11. Okereke MI (2016) Flexural response of polypropylene/E-glass fibre reinforced unidirectional composites. Compos Part B-Eng 89:388–396. https://doi.org/10.1016/j.compositesb.2016.01.00710.1016/j.compositesb.2016.01.007 ↗
12. Mesquita F, Gysel AV, Selezneva M, Swolfs Y, Lomov SV, Gorbatikh L (2018) Flexural behaviour of corrugated panels of self-reinforced polypropylene hybridised with carbon fibre: An experimental and modelling study. Compos Part B-Eng 153:437–444. https://doi.org/10.1016/j.compositesb.2018.09.01710.1016/j.compositesb.2018.09.017 ↗
13. Selezneva M, Swolfs Y, Katalagarianakis A et al (2018) The brittle-to-ductile transition in tensile and impact behavior of hybrid carbon fibre/self-reinforced polypropylene composites. Compos Part A-Appl S 109:20–30. https://doi.org/10.1016/j.compositesa.2018.02.03410.1016/j.compositesa.2018.02.034 ↗
14. Sullins T, Pillay S, Komus A, Ning H (2017) Hemp fiber reinforced polypropylene composites: the effects of material treatments. Compos Part B-Eng 114:15–22. https://doi.org/10.1016/j.compositesb.2017.02.00110.1016/j.compositesb.2017.02.001 ↗
15. Zhou Y, Fan M, Chen L (2016) Interface and bonding mechanisms of plant fibre composites: an overview. Compos Part B-Eng 101:31–45. https://doi.org/10.1016/j.compositesb.2016.06.05510.1016/j.compositesb.2016.06.055 ↗
16. Fortea-Verdejo M, Bumbaris E, Burgstaller C, Bismarck A, Lee KY (2017) Plant fibre-reinforced polymers: where do we stand in terms of tensile properties? Mech Mater 62:461–464. https://doi.org/10.1080/09506608.2016.127108910.1080/09506608.2016.1271089 ↗
17. Ahmad SR, Xue CZ, Young RJ (2017) The mechanisms of reinforcement of polypropylene by graphene nanoplatelets. Mater Sci Eng B-Adv 216:2–910.1016/j.mseb.2016.10.003 ↗
18. Bian J, Wang ZJ, Lin HL, Zhou X, Xiao WQ, Zhao XW (2017) Thermal and mechanical properties of polypropylene nanocomposites reinforced with nano-SiO2 functionalized graphene oxide. Compos Part A-Appl S 97:120–127. https://doi.org/10.1016/j.compositesa.2017.01.00210.1016/j.compositesa.2017.01.002 ↗
19. Zhou Y, He JL, Hu J, Dang B (2016) Surface-modified MgO nanoparticle enhances the mechanical and direct-current electrical characteristics of polypropylene/polyolefin elastomer nanodielectrics. J Appl Polym Sci 132:42863. https://doi.org/10.1002/app.4286310.1002/app.42863 ↗
20. Liang JZ, Du Q, Tsui GCP, Tang CY (2016) Tensile properties of graphene nano-platelets reinforced polypropylene composites. Compos Part B-Eng 95:166–171. https://doi.org/10.1016/j.compositesb.2016.04.01110.1016/j.compositesb.2016.04.011 ↗
21. Lin YR, Sodano HA (2009) Fabrication and electromechanical characterization of a piezoelectric structural fiber for multifunctional composites. Adv Funct Mater 19:592–598. https://doi.org/10.1002/adfm.20080085910.1002/adfm.200800859 ↗
22. Peng K, Wan Y, Ren DY, Zeng QW, Tang LC (2014) Scalable preparation of multiscale carbon nanobube/glass fiber reinforcements and their application in polymer composites. Fiber Polym 15:1242–1250. https://doi.org/10.1007/s12221-014-1242-410.1007/s12221-014-1242-4 ↗
23. Li CQ, Zha JW, Long HQ, Wang SJ, Zhang DL, Dang ZM (2017) Mechanical and dielectric properties of graphene incorporated polypropylene nanocomposites using polypropylene-graft-maleic anhydride as a compatibilizer. Compos Sci Technol 153:111–118. https://doi.org/10.1016/j.compscitech.2017.10.01510.1016/j.compscitech.2017.10.015 ↗
24. Quiles-Díaz S, Enrique-Jimenez P, Papageorgiou DG et al (2017) Influence of the chemical functionalization of graphene on the properties of polypropylene-based nanocomposites. Compos Part A-Appl S 100:31–39. https://doi.org/10.1016/j.compositesa.2017.04.01910.1016/j.compositesa.2017.04.019 ↗
25. Nevare MR, Tatiya PD, Mahulikar PP, Gite VV (2016) Effect of maleated polypropylene as a compatibilizer and hyperbranched polyester as a processing aid on polypropylene-wood flour biocomposites. J Vinyl Addit Techn 24:179–184. https://doi.org/10.1002/vnl.2154410.1002/vnl.21544 ↗
26. Oliveira1MN, Dutra1NEDC, Codelo NF, Haruo SN (2018) Study of the effect of compatibility agents in the incorporation of rice hull ash in polypropylene compounds: mechanical properties. Mater Sci Forum 1662-9752: 179–183. doi: https://doi.org/10.4028/WWW.SCIENTIFIC.NET/MSF.930.17910.4028/WWW.SCIENTIFIC.NET/MSF.930.179 ↗
27. Girones J, Mendez JA, Boufi S, Vilaseca F, Mutje P (2007) Effect of silane coupling agents on the properties of pine fibers/polypropylene composites. J Appl Polym Sci 103:3706–3717. https://doi.org/10.1002/APP.2510410.1002/APP.25104 ↗
28. Beg MDH, Pickering KL (2008) Peprocessing of wood fibre reinforced polypropylene composites. Part I: effects on physical and mechanical properties. Compos Part A-Appl S 39:1091–1100. https://doi.org/10.1016/J.COMPOSITESA.2008.04.01310.1016/J.COMPOSITESA.2008.04.013 ↗
29. Majeed K, jawaid M, Hassan A, Bakar AA, Khalil HPSA, Salema AA, Inuwa I (2013) Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites. Mater Design 46: 391–410. doi: https://doi.org/10.1016/J.MATDES.2012.10.04410.1016/J.MATDES.2012.10.044 ↗
30. Jang GS, Cho WJ, Ha CS (2001) Crystallization behavior of polypropylene with or without sodium benzoate as a nucleating agent. J Polym Sci B: Polym Phys 39:1001–1016. https://doi.org/10.1002/polb.107710.1002/polb.1077 ↗
31. Wang Z, Wang L (2011) Effect of α nucleating agent on crystallization, light transmittance rate and mechanical property of polypropylene. Polym-Plast Technol 39:90–93. https://doi.org/10.15925/j.cnki.issn1005-3360.2011.02.01110.15925/j.cnki.issn1005-3360.2011.02.011 ↗
32. Qiao YH, Jalali A, Yang JN et al (2021) Non-isothermal crystallization kinetics of polypropylene/polytetrafluoroethylene fibrillated composites. J Mater Sci 56:3562–3575. https://doi.org/10.1007/S10853-020-05328-510.1007/S10853-020-05328-5 ↗
33. Li L, Wu J, Liu M, Yang L, Mu XM (2012) Effect of α-nucleating agent on properties of homo-polyproplene. Plastics Sci Technol 40:42–44. https://doi.org/10.15925/j.cnki.issn1005-3360.2012.11.00510.15925/j.cnki.issn1005-3360.2012.11.005 ↗
34. Lee-Sullivan P, Dykeman D (2000) Guidelines for performing storage modulus measurements using the TA Instruments DMA 2980 three-point bend mode I. Amplitude effects Polym Test 19:155–164. https://doi.org/10.1016/S0142-9418(98)00083-X10.1016/S0142-9418(98)00083-X ↗
35. Liang JZ (2010) Predictions of storage modulus of glass bead-filled low-density-polyethylene composites. Mater Sci Appl 1:343–349. https://doi.org/10.4236/msa.2010.1605010.4236/msa.2010.16050 ↗
36. Varley RJ, Dell’Olio M, Yuan Q, Khor S, Leong KH, Bateman S (2013) Different β nucleants and the resultant microstructural, fracture, and tensile properties for filled and unfilled iso polypropylene. J Appl Polym Sci 128:619–627. https://doi.org/10.1002/APP.3815210.1002/APP.38152 ↗
37. Salah HBH, Daly HB, Denault J, Perrin F (2013) Morphological aspects of injected polypropylene/clay nanocomposite materials. Polym Eng Sci 53:905–913. https://doi.org/10.1002/PEN.2333410.1002/PEN.23334 ↗
38. Hedesiu C, Demco DE, Kleppinger R, Vanden Poel G, Gijsbers W, Blümich B, Remerie K, Litvinov VM (2007) Effect of temperature and annealing on the phase composition molecular mobility, and the thickness of domains in isotactic polypropylene studied by proton solid-state NMR, SAXS, and DSC. Macromolecules 40:3977–3989. https://doi.org/10.1021/ma070014q10.1021/ma070014q ↗
39. Wang WH, Zhao GQ, Guan YJ, Wu XH, Zhai Z, Hui Y (2015) Effect of rapid heating cycle injectionmold temperature on crystal structures, morphology of polypropylene and surface qualityof plastic parts. J Polym Res 22:84. https://doi.org/10.1007/s10965-015-0731-510.1007/s10965-015-0731-5 ↗
40. Chen JW, Dai J, Yang JH, Zhang N, Huang T, Wang Y, Zhang CL (2014) Amplified toughening effect of annealing on isotactic polypropylene realized by introducing microvoids. Ind Eng Chem Res 53:4679–4688. https://doi.org/10.1021/IE403872D10.1021/IE403872D ↗
41. Hodge IM (1995) Physical aging in polymer glasses. Science 267:1945–1947. https://doi.org/10.1126/SCIENCE.267.5206.194510.1126/SCIENCE.267.5206.1945 ↗
42. Wang WH, Zhao GQ, Guan YJ, Wu X, Zhai Z (2015) The effect of high temperature annealing process on crystallization process of polypropylene, mechanical properties and surface quality of plastic parts. J Appl Polym Sci 132:42773. https://doi.org/10.1002/APP.4277310.1002/APP.42773 ↗
43. Bai HW, Deng H, Zhang Q, Wang K, Fu Q, Zhang ZJ, Men YF (2012) Effect of annealing on the microstructure and mechanical properties of polypropylene with oriented shish-kebab structure. Polym Int 61:252–258. https://doi.org/10.1002/PI.318010.1002/PI.3180 ↗
44. Arao Y, Yumitori S, Suzuki H, Tanaka T, Tanaka K, Katayama T (2013) Mechanical properties of injection-molded carbon fiber/polypropylene. Compos Part A-Appl S 55:19–26. https://doi.org/10.1016/J.COMPOSITESA.2013.08.00210.1016/J.COMPOSITESA.2013.08.002 ↗
45. Chou TW, Gao LM, Thostenson ET, Zhang ZG, Byun JH (2010) An assessment of the science and technology of carbon nanotube-based fibers and composites. Compos Sci Technol 70:1–19. https://doi.org/10.1016/j.compscitech.2009.10.00410.1016/j.compscitech.2009.10.004 ↗
46. Kumar A, Sharma K, Dixit AR (2020) Carbon nanotube- and grapheme-reinforced multiphase polymeric composites: review on their properties and applications. J Mater Sci 55:2682–2724. https://doi.org/10.1007/S10853-019-04196-Y10.1007/S10853-019-04196-Y ↗
47. Thomason JL, Yang L (2011) Temperature dependence of the interfacial shear strength in glass-fibre polypropylene composites. Compos Sci Technol 71:1600–1605. https://doi.org/10.1016/j.compscitech.2011.07.00610.1016/j.compscitech.2011.07.006 ↗
48. Zhang H, Zhang Z (2007) Impact behavior of polypropylene filled with multi-walled carbon nanotubes. Eur Polym J 43:3197–3207. https://doi.org/10.1016/j.eurpolymj.2007.05.01010.1016/j.eurpolymj.2007.05.010 ↗