journal article·2021-06Open access

Sputtered highly effective iridium catalysts: a new approach for green satellite propulsion

Manfred Stollenwerk, Tobias Schäfer, Johannes Stadtmüller, Thorsten Döhring, Dominic Freudenmann, Nicole Röcke

Journal of Materials Science· Volume 56· Issue 16

Abstract

Abstract This work demonstrated the large potential of sputtered iridium metal for catalytic reactions shown by the example of decomposition of hydrogen peroxide (H2O2) for space propulsion systems. For this purpose, iridium was coated onto Al2O3 pellets by a sputter process under varied process parameters. Depending on previously selected parameters, the obtained metal-loaded pellets offer closed- and/or open-shell structures. Catalytic productivity of these first-generation iridium-sputtered catalysts was estimated in laboratory experiments and compared to platinum-loaded pellets. Under optimized sputter-process conditions, the reactivity is significantly improved compared to the platinum-impregnated pellets. The better catalytic productivity can be explained by the increased active surface area of the iridium layers on the pellets. The surface morphology and the microstructure of the iridium coating can be actively controlled by the sputter pressure. The results are in accordance with the sputtering process pressure tendency described by the Thornton Structure–Zone Model. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Catalytic Processes in Materials Science · nanoparticles nucleation surface interactions · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Malm J (2011) Inclusion of substances of very high concern in the candidate list. European Chemicals Agency (EACH), Helsinki
2. Morgan OM, Meinhardt DS (1999) Monopropellant selection criteria - hydrazine and other options. In: 35th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit 1999, AIAA paper no. 99–2595, Los Angeles, United States. doi: https://doi.org/10.2514/6.1999-259510.2514/6.1999-2595 ↗
3. Ventura M, Mullens P (1999) The use of hydrogen peroxide for propulsion and power. In: 5th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit 1999, AIAA paper no. 99–2880, Los Angeles, USA. doi: https://doi.org/10.2514/6.1999-288010.2514/6.1999-2880 ↗
4. Gohardani AS, Stanojev J, Demairé A, Anflo K, Persson M, Wingborg N, Nilsson C (2014) Green space propulsion: opportunities and prospects. Prog Aerosp Sci 71:128–149. https://doi.org/10.1016/j.paerosci.2014.08.00110.1016/j.paerosci.2014.08.001 ↗
5. Batonneau Y, Brahmi R, Cartoixa B, Farhat K, Kappenstein C, Keav S, Kharchafi-Farhat G, Pirault-Roy L, Saouabé M, Scharlemann C (2014) Green propulsion: catalysts for the European FP7 Project GRASP. Top Catal 57:656–667. https://doi.org/10.1007/s11244-013-0223-y10.1007/s11244-013-0223-y ↗
6. Amariei D, Rossignol S, Kappenstein C, Joulin JP (2006) Shape forming of Pt/Al2O3Si sol-gel catalysts for space applications. Stud Surf Sci Catal 162:969–976. https://doi.org/10.1016/S0167-2991(06)81004-910.1016/S0167-2991(06)81004-9 ↗
7. S. Casu, B. Geiger, R. Kiemel, J.-Y. Lestrade, J. Anthoine (2019) Development and characterization of a catalyst for the decomposition of hydrogen peroxide. In: AIAA propulsion and energy forum 2019, AIAA paper no. 2019–4278, Indianapolis, United States. doi: https://doi.org/10.2514/6.2019-427810.2514/6.2019-4278 ↗
8. Dolci S, Belli Dell’Amico D, Pasini A, Torre L, Pace G, Valentini D (2015) Platinum catalysts development for 98% hydrogen peroxide decomposition in pulsed monopropellant thrusters. J Propul Power 31:1204–1216. https://doi.org/10.2514/1.B3559010.2514/1.B35590 ↗
9. Gordon S, McBride BJ (1994) Computer program for calculation of complex chemical equilibrium compositions and applications. NASA, United States, Washington
10. Schumb WC, Satterfield CN, Wentworth RL (1955) Hydrogen peroxide. Reinhold Publishing Corporation, New York, 1955: 602–605
11. Meille V (2006) Review on methods to deposit catalysts on structured surfaces. Appl Catal A: General 315:1–17. https://doi.org/10.1016/j.apcata.2006.08.03110.1016/j.apcata.2006.08.031 ↗
12. Brault P (2011) Plasma deposition of catalytic thin films: experiments, applications, molecular modelling. Surf Coat Technol 205:S15–S23. https://doi.org/10.1016/j.apcata.2006.08.03110.1016/j.apcata.2006.08.031 ↗
13. Johnson RW, Hultqvist A, Bent SF (2014) A brief review of atomic layer deposition: from fundamentals to applications. Mater Today 17:236–246. https://doi.org/10.1016/j.mattod.2014.04.02610.1016/j.mattod.2014.04.026 ↗
14. El Khakani MA, Chaker M, Le Drogoff B (1998) Iridium thin films deposited by radio-frequency magnetron sputtering. J Vac Sci Technol A 16:885–888. https://doi.org/10.1116/1.58102910.1116/1.581029 ↗
15. Easton EB, Bonakdarpour A, Dahn JR (2006) Fe-CN oxygen reduction catalysts prepared by combinatorial sputter deposition. Electrochem Solid-State Lett 9:A463–A467. https://doi.org/10.1149/1.226615710.1149/1.2266157 ↗
16. Kizling MB, Järås SG (1996) A review of the use of plasma techniques in catalyst preparation and catalytic reactions. Appl Catal A: General 147:1–21. https://doi.org/10.1016/S0926-860X(96)00215-310.1016/S0926-860X(96)00215-3 ↗
17. Beni G, Schiavone LM, Shay JL, Dautremont-Smith WC, Schneider BS (1979) Electrocatalytic oxygen evolution on reactively sputtered electrochromic iridium oxide films. Nature 282:281–238. https://doi.org/10.1038/282281a010.1038/282281a0 ↗
18. Mukerjee S, Srinivasan S, Appleby AJ (1993) Effect of sputtered film of platinum on low platinum loading electrodes on electrode kinetics of oxygen reduction in proton exchange membrane fuel cells. Electrochim Acta 38:1661–1669. https://doi.org/10.1016/0013-4686(93)85056-510.1016/0013-4686(93)85056-5 ↗
19. Atanasoski RT, Atanasoska LL, Cullen DA, Haugen GM, More KL, Vernstrom GD (2012) Fuel cells catalyst for start-up and shutdown conditions: electrochemical, XPS, and STEM evaluation of sputter-deposited Ru, Ir, and Ti on Pt-coated nanostructured thin film supports. Electrocatalysis 3:284–297. https://doi.org/10.1007/s12678-012-0092-310.1007/s12678-012-0092-3 ↗
20. Alvisia M, Galtieri G, Giorgi L, Giorgi R, Serra E, Signore MA (2005) Sputter deposition of Pt nanoclusters and thin films on PEM fuel cell electrodes. Surf Coat Technol 200:1325–1329. https://doi.org/10.1016/j.surfcoat.2005.07.09310.1016/j.surfcoat.2005.07.093 ↗
21. Hirano S, Kim J, Srinivasan S (1997) High performance proton exchange membrane fuel cells with sputter-deposited Pt layer electrodes. Electrochim Acta 42:1587–1593. https://doi.org/10.1016/S0013-4686(96)00320-910.1016/S0013-4686(96)00320-9 ↗
22. G. Ganske, G. Topalov, E. Slavcheva, W. Mokwa, U. Schnakenberg (2009) Sputtered platinum-iridium as catalyst for hydrogen fuel cells. TRANSDUCERS 2009 International Solid-State Sensors, Actuators and Microsystems Conference, Denver, CO: 2106–2109. doi: https://doi.org/10.1109/SENSOR.2009.528562110.1109/SENSOR.2009.5285621 ↗
23. Topalov G, Ganske G, Lefterova E, Schnakenberg U, Slavcheva E (2011) Preparation and properties of thin Pt–Ir films deposited by dc magnetron co-sputtering. Int J Hydrogen Energy 36:15437–15445. https://doi.org/10.1016/j.ijhydene.2011.08.10010.1016/j.ijhydene.2011.08.100 ↗
24. Slavcheva E, Topalov G, Ganske G, Radev I, Lefterova E, Schnakenberg U (2010) Influence of sputtering pressure on surface structure and oxygen reduction reaction catalytic activity of thin platinum films. Electrochim Acta 55:8992–8997. https://doi.org/10.1016/j.electacta.2010.08.04710.1016/j.electacta.2010.08.047 ↗
25. Slavcheva E, Radev I, Bliznakov S, Topalov G, Andreev P, Budevski E (2007) Sputtered iridium oxide films as electrocatalysts for water splitting via PEM electrolysis. Electrochim Acta 52:3889–3894. https://doi.org/10.1016/j.electacta.2006.11.00510.1016/j.electacta.2006.11.005 ↗
26. Wessling B, van Ooyen A, Mokwa W, Schnakenberg U (2006) Iridium sputtered at varying pressures and target-substrate-distances evaluated for use as stimulation electrode material. In: International conference of the IEEE engineering in medicine and biology society: 3353. doi: https://doi.org/10.1109/IEMBS.2006.26054110.1109/IEMBS.2006.260541 ↗
27. Wessling B, Besmehn A, Mokwa W, Schnakenberg U (2007) Reactively sputtered iridium oxide: influence of plasma excitation and substrate temperature on morphology, composition, and electrochemical characteristics. J Electrochem Soc 154:83–89. https://doi.org/10.1149/1.271369110.1149/1.2713691 ↗
28. Wessling B, Mokwa W, Schnakenberg U (2008) Sputtered Ir films evaluated for electrochemical performance I. Experimental results. J Electrochem Soc 155:61–65. https://doi.org/10.1149/1.284480510.1149/1.2844805 ↗
29. Wessling B, Lüsebrink D, Mokwa W, Schnakenberg U (2008) Sputtered Ir films evaluated for electrochemical performance ii. Simulations J Electrochem Soc 155:66–74. https://doi.org/10.1149/1.284481810.1149/1.2844818 ↗
30. Qing W, Liu F, Yao H, Sun S, Chen C, Zhang W (2020) Functional catalytic membrane development: a review of catalyst coating techniques. Adv Coll Interface Sci 282:102207. https://doi.org/10.1016/j.cis.2020.10220710.1016/j.cis.2020.102207 ↗
31. Rogers DB (1972) Single crystals of transition-metal dioxides. Inorganic Syntheses, Vol. 13 (Eds: F. A. Cotton), McGraw–Hill Book Company Inc. New York, US 1972:135–145. https://doi.org/10.1002/9780470132449.ch2710.1002/9780470132449.ch27 ↗
32. Lai SL, Guo JY, Petrova V, Rammath G, Allen LH (1996) Size-dependent melting properties of small tin particles: nanocalorimetric measurements. Phys Rev Lett 77:99–102. https://doi.org/10.1103/PhysRevLett.77.9910.1103/PhysRevLett.77.99 ↗
33. Buffat PH, Borrel JP (1976) Size effect on the melting temperature of gold particles. Phys Rev A 13:2287–2298. https://doi.org/10.1103/PhysRevA.13.228710.1103/PhysRevA.13.2287 ↗
34. Büttner A, Probst A-C, Emmerich F, Damm C, Rellinghaus B, Döhring T, Stollenwerk M (2018) Influence of sputtering pressure on microstructure and layer properties of iridium thin films. Thin Solid Films 662:41–46. https://doi.org/10.1016/j.tsf.2018.06.05610.1016/j.tsf.2018.06.056 ↗
35. J. A. Thornton (1988) Structure-Zone Models Of Thin Films. Proc. SPIE 0821, Modeling of Optical Thin Films: 95–105. doi: https://doi.org/10.1117/12.94184610.1117/12.941846 ↗
36. Thornton JA (1986) The microstructure of sputter-deposited coatings. J Vac Sci Technol A 4:3059–3065. https://doi.org/10.1116/1.57362810.1116/1.573628 ↗