Dynamic recrystallization behavior during hot deformation of as-cast 4Cr5MoSiV1 steel
Source abstract
Abstract
The dynamic recrystallization behavior of as-cast 4Cr5MoSiV1 steel was studied by hot compression tests conducted at various temperatures (900–1150 °C) and strain rates (0.01–10 s−1). Flow stress curves and microstructural observation were employed to experimentally identify the various flow mechanisms during deformation. A revised Sellars’ constitutive equation was adopted to construct the thermal activation energy map, which considered the effects of deformation temperature and strain rate on the material variables. The Johnson–Mehl–Avrami-Kolmogorov (JMAK) type equation $$XD = 1 - \exp [ - k(\frac{{\varepsilon - \varepsilonc }}{{\varepsilonp }})m ],(\varepsilon \ge \varepsilonc )$$ was applied to characterize the evolution of dynamic recrystallization (DRX) volume fraction. The nucleation of DRX was performed by the bulging, sub-grain swallowing. The presence of dendrite segregation would affect the DRX to a large extent that the segregated alloying elements and carbide precipitates inhibited the migration of boundaries. The thermal activation energy varied from 4310 to 470 kJ/mol and the thermal activation energy increased sharply at temperature below 1000 °C due to the dendrite segregation. By further analysis of the true stress–strain curves, the material constant $$m$$ in JMAK type equation was determined to be 1.29366, indicating the DRX was difficult.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Mao M, Guo H, Wang F, Sun X (2019) Effect of cooling rate on the solidification microstructure and characteristics of primary carbides in H13 steel. ISIJ Int 59:848–857. https://doi.org/10.2355/isijinternational.isijint-2018-52410.2355/isijinternational.isijint-2018-524 ↗
2. Kheirandish S, Noorian A (2008) Effect of Niobium on microstructure of cast AISI H13 hot work tool steel. J Iron Steel Res 15:61–66. https://doi.org/10.1016/S1006-706X(08)60145-410.1016/S1006-706X(08)60145-4 ↗
3. Wang M, Ma D, Liu Z, Zhou J, Chi H, Dai J (2014) Effect of Nb on segregation, primary carbides and toughness of H13 steel. Acta Metall Sin 50:285–293. https://doi.org/10.3724/SP.J.1037.2013.0049010.3724/SP.J.1037.2013.00490 ↗
4. Zhang J, Huang J, Wang H, Lu L, Cui H (2014) Microstructures and mechanical properties of spray formed H13 tool steel. Acta Metall Sin 50:787–794. https://doi.org/10.3724/SP.J.1037.2013.0082010.3724/SP.J.1037.2013.00820 ↗
5. Zhang B, Yang F, Qin Q, Lu T, Sun H, Lin S, Chen C, Guo Z (2020) Characterisation of powder metallurgy H13 steels prepared from water atomised powders. Powder Metall 63:9–18. https://doi.org/10.1080/00325899.2019.169216910.1080/00325899.2019.1692169 ↗
6. Pei Y, Ma D, Liu B, Chen Z, Zhou R, Zhou J (2012) Effect of forging ratio on microstructure and mechanical property of H13 steel. Iron Steel 47:81–86. https://doi.org/10.1007/s11783-011-0280-z10.1007/s11783-011-0280-z ↗
7. Wang J, Xu Z, Lu X (2020) Effect of the quenching and tempering temperatures on the microstructure and mechanical properties of H13 Steel. J Mater Eng and Perform 29:1849–1859. https://doi.org/10.1007/s11665-020-04686-010.1007/s11665-020-04686-0 ↗
8. Perez M, Belzunce FJ (2015) The effect of deep cryogenic treatments on the mechanical properties of an AISI H13 steel. Mater Sci Eng A 624:32–40. https://doi.org/10.1016/j.msea.2014.11.05110.1016/j.msea.2014.11.051 ↗
9. Han Y, Li C, Ren J, Qiu C, Zhang Y, Wang J (2019) Dendrite segregation changes in high temperature homogenization process of as-cast H13 steel. ISIJ Int 59:1893–1900. https://doi.org/10.2355/isijinternational.ISIJINT-2019-14810.2355/isijinternational.ISIJINT-2019-148 ↗
10. Zhou J, Ma D, Liu B, Kang A, Li X (2012) Research of band segregation evolution of H13 steel. J Iron Steel Res 24:47–52. https://doi.org/10.1007/s11783-011-0280-z10.1007/s11783-011-0280-z ↗
11. Grange RA (1971) Effect of microstructural banding in steel. Metall Mater Trans B 2:417–426. https://doi.org/10.1007/BF0266332810.1007/BF02663328 ↗
12. Berger CM, Finn J (1995) The effect of annealed microstructure on the impact toughness of premium H13 die steel, Transactions of the 18th international die casting congress and exposition, pp 357–359
13. Li C, Zhang Q, Wang P (2017) Influence of forging ratio on heredity rules of grain structure for die steel H13. Forg Stamp Tech 42:9–12
14. Wang Y, Liu C, Jiang F, Zheng YX, Duan LZ (2015) Influence of forging process on the structure and impact property of electro remelted H13 steel. Hebei Metall 6:5–7
15. Zhou J, Ma D, Pei Y, Li Z, Liu B, Feng S (2013) Influence of Forging ratio on microstructure and impact property of H13 hot work die steel by electrosmelting. Mater Mech Eng 37:73–78
16. Huang K, Logé RE (2016) A review of dynamic recrystallization phenomena in metallic materials. Mater Des 111:548–574. https://doi.org/10.1016/j.matdes.2016.09.01210.1016/j.matdes.2016.09.012 ↗
17. Li C, Tan Y, Zhao F (2020) Dynamic recrystallization behaviour of H13-mod steel. J Iron Steel Res Int 27:1073–1086. https://doi.org/10.1007/s42243-020-00462-510.1007/s42243-020-00462-5 ↗
18. Zhang J, Huang J, Cui H, Zhang J (2014) High-temperature thermal deformation and microstructure evolution of spray formed H13 tool steel. Hot Working Tech 43:1–5
19. Zhao Z, Sun M, Sun J (2017) study on hot deformation behavior and hot processing map of H13 steel containing rare earth. Mater Rev 31:149–155
20. Esteban-Manzanares G, Santos-Güemes R, Papadimitriou I, Martínezc E, LLorca J (2020) Influence of the stress state on the cross-slip free energy barrier in Al: an atomistic investigation. Acta Mater 184:109–119. https://doi.org/10.1016/j.actamat.2019.10.05510.1016/j.actamat.2019.10.055 ↗
21. Shi C, Mao W, Chen X (2013) Evolution of activation energy during hot deformation of AA7150 aluminum alloy. Mater Sci Eng A 517:83–91. https://doi.org/10.1016/j.msea.2013.01.08010.1016/j.msea.2013.01.080 ↗
22. Wang S, Hou L, Luo J, Zhang J, Zhuang L (2015) Characterization of hot workability in AA 7050 aluminum alloy using activation energy and 3-D processing map. J Mater Process Tech 225:110–121. https://doi.org/10.1016/j.jmatprotec.2015.05.01810.1016/j.jmatprotec.2015.05.018 ↗
23. Irani M, Lim S, Joun M (2019) Experimental and numerical study on the temperature sensitivity of the dynamic recrystallization activation energy and strain rate exponent in the JMAK model. J Mater Res Technol 8:1616–1627. https://doi.org/10.1016/j.jmrt.2018.11.00710.1016/j.jmrt.2018.11.007 ↗
24. Quan G, Mao A, Luo G, Liang J, Wu D, Zhou J (2013) Constitutive modeling for the dynamic recrystallization kinetics of as-extruded 3Cr20Ni10W2 heat-resistant alloy based on stress-strain data. Mater Des 52:98–107. https://doi.org/10.1016/j.matdes.2013.05.03010.1016/j.matdes.2013.05.030 ↗
25. Peng X, Su W, Xiao D, Xu G (2018) Investigation on hot workability of homogenized Al-Zn-Mg-Cu alloy based on activation energy and processing map. JOM 70:993–999. https://doi.org/10.1007/s11837-017-2708-910.1007/s11837-017-2708-9 ↗
26. Yue C, Zhang L, Liao S, Pei J, Gao H, Jia Y, Lian X (2009) Research on the dynamic recrystallization behavior of GCr15 steel. Mater Sci Eng A 499:177–181. https://doi.org/10.1016/j.msea.2007.11.12310.1016/j.msea.2007.11.123 ↗
27. Jin X, Xu W, Shan D, Liu C, Zhang Q (2017) Deformation behavior microstructure evolution and hot workability of Mg-3.7Gd-2.9Y-0.7Zn-0.7Zr alloy. Met Mater Int 23:434–443. https://doi.org/10.1007/s12540-017-6352-210.1007/s12540-017-6352-2 ↗
28. Zhang C, Zhang L, Xu Q, Xia Y, Shen W (2016) The kinetics and cellular automaton modeling of dynamic recrystallization behavior of a medium carbon Cr-Ni-Mo alloyed steel in hot working process. Mater Sci Eng A 678:33–43. https://doi.org/10.1016/j.msea.2016.09.05610.1016/j.msea.2016.09.056 ↗
29. Xu Y, Tang D, Song Y, Pan X (2012) Dynamic recrystallization kinetics model of X70 pipeline steel. Mater Des 39:168–174. https://doi.org/10.1016/j.matdes.2012.02.03410.1016/j.matdes.2012.02.034 ↗
30. Liu J, Cui Z, Ruan L (2011) A new kinetics model of dynamic recrystallization for magnesium alloy AZ31B. Mater Sci Eng A 529:300–310. https://doi.org/10.1016/j.msea.2011.09.03210.1016/j.msea.2011.09.032 ↗
31. Jin S, Tao N, Marthinsen K, Li Y (2015) Deformation of an Al–7Mg alloy with extensive structural micro-segregations during dynamic plastic deformation. Mater Sci Eng A 628:160–167. https://doi.org/10.1016/j.msea.2015.01.05710.1016/j.msea.2015.01.057 ↗
32. Wang J, Hodgson PD, Bikmukhametov L, Miller MK, Timokhina I (2017) Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels. Mater Des 141:8–56. https://doi.org/10.1016/j.matdes.2017.12.02310.1016/j.matdes.2017.12.023 ↗
33. Chen K, Yang Y, Shao G, Liu K (2011) Enhancing the homogenized diffusion of chromium in alloy steel ingot by forging. Steel Res Int 82:1325–1331. https://doi.org/10.1002/srin.20110012810.1002/srin.201100128 ↗
34. Zhang M, Li F, Wang S, Liu C (2010) Characterization of hot deformation behavior of a P/M nickel-base superalloy using processing map and activation energy. Mater Sci Eng A 527:6771–6779. https://doi.org/10.1016/j.msea.2010.07.03910.1016/j.msea.2010.07.039 ↗
35. Hu H, Zhen L, Zhang B, Yang L, Chen J (2008) Microstructure characterization of 7050 aluminum alloy during dynamic recrystallization and dynamic recovery. Mater Charact 59:1185–1189. https://doi.org/10.1016/j.matchar.2007.09.01010.1016/j.matchar.2007.09.010 ↗
36. Hussein AM, Rao SI, Uchic MD, Dimiduk DM, El-Awady JA (2015) Microstructurally based cross-slip mechanisms and their effects on dislocation microstructure evolution in fcc crystals. Acta Mater 85:180–190. https://doi.org/10.1016/j.actamat.2014.10.06710.1016/j.actamat.2014.10.067 ↗
37. Alizadeh R, Mahmudi R, Ngan AHW, Langdon TG (2017) Microstructural evolution during hot shear deformation of an extruded fine-grained Mg–Gd–Y–Zr alloy. J Mater Sci 52(13):7843–7857. https://doi.org/10.1007/s10853-017-1031-810.1007/s10853-017-1031-8 ↗
38. Samaee V, Sandfeld S, Idrissi H, Groten J, Pardoen T, Schwaiger R, Schryvers D (2020) Dislocation structures and the role of grain boundaries in cyclically deformed Ni micropillars. Mater Sci Eng A 769:138295. https://doi.org/10.1016/j.msea.2019.13829510.1016/j.msea.2019.138295 ↗
39. Yan L, Shen J, Li Z, Li J, Yan X (2010) Microstructure evolution of Al-Zn-Mg-Cu-Zr alloy during hot deformation. Rare Met 29:426–432. https://doi.org/10.1007/s12598-010-0143-y10.1007/s12598-010-0143-y ↗
40. He B, Hu B, Yen H, Cheng G, Wang Z, Luo H, Huang M (2017) High dislocation density–induced large ductility in deformed and partitioned steels. Science 357:1029–1032. https://doi.org/10.1126/science.aan017710.1126/science.aan0177 ↗
41. Ma B, Li C, Song Y, Wang J, Sui F (2017) Deformation and recrystallization microtextures of an austenitic steel during asymmetrical hot rolling process. J Mater Sci 52(22):13212–13226. https://doi.org/10.1007/s10853-017-1172-910.1007/s10853-017-1172-9 ↗
42. Zhou P, Ma Q (2017) Dynamic recrystallization behavior and processing map development of 25CrMo4 mirror plate steel during hot deformation. Acta Metall Sin (Engl Lett) 30:907–920. https://doi.org/10.1007/s40195-017-0613-410.1007/s40195-017-0613-4 ↗
43. Mirzadeh H, Najafizadeh A (2012) Modeling and prediction of hot deformation flow curves[J]. Metall Mater Trans A 43:108–123. https://doi.org/10.1007/s11661-011-0836-310.1007/s11661-011-0836-3 ↗
44. Wang S, Zhang M, Wu H, Yang B (2016) Study on the dynamic recrystallization model and mechanism of nuclear grade 316LN austenitic stainless steel. Mater Charact 118:92–101. https://doi.org/10.1016/j.matchar.2016.05.01510.1016/j.matchar.2016.05.015 ↗
45. Chen K, Yang Y, Shao G, Liu K (2011) Effect of recrystallization grain boundary on homogenizeddiffusion of chromium in alloy steel ingot. Trans Mater Heat Treat. 32:79–83. https://doi.org/10.13289/j.issn.1009-6264.2011.05.01610.13289/j.issn.1009-6264.2011.05.016 ↗
46. Sun B, Fazeli F, Scott C, Brodusch N, Gauvin R, Yue S (2018) The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels. Acta Mater 148:249–262. https://doi.org/10.1016/j.actamat.2018.02.00510.1016/j.actamat.2018.02.005 ↗
47. Hong S, Kang K, Park CG (2002) Strain-induced precipitation of NbC in Nb and Nb-Ti microalloyed HSLA steels. Scripta Mater 46:163–16810.1016/S1359-6462(01)01214-3 ↗
48. Sha Q, Sun Z (2009) Grain growth behavior of coarse-grained austenite in a Nb-V-Ti microalloyed steel. Mater Sci Eng A 523:77–84. https://doi.org/10.1016/j.msea.2009.05.03710.1016/j.msea.2009.05.037 ↗
49. Xia Y, Liu Y, Mao Y, Quan G, Zhou J (2012) Determination of critical parameters for dynamic recrystallization in Ti–6Al–2Zr–1Mo–1V alloy. T Nonferr Metal Soc 22:668–672. https://doi.org/10.1016/S1003-6326(12)61783-X10.1016/S1003-6326(12)61783-X ↗
50. Yin F, Hua L, Mao H, Han X (2013) Constitutive modeling for flow behavior of GCr15 steel under hot compression experiments. Mater Des 43:393–401. https://doi.org/10.1016/j.matdes.2012.07.00910.1016/j.matdes.2012.07.009 ↗
51. Huang X, Zhang H, Han Y, Wu W, Chen J (2010) Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature. Mater Sci Eng A 527:485–490. https://doi.org/10.1016/j.msea.2009.09.04210.1016/j.msea.2009.09.042 ↗
52. Honeycombe RWK (1984) The plastic deformation of metals, 2nd edn. Edward Arnold Ltd., Maryland
53. Radhakrishnan B, Sarma GB, Zacharia T (1998) Modeling the kinetics and microstructural evolution during static recrystallization-Monte Carlo simulation of recrystallization. Acta Mater 46:4415–4433. https://doi.org/10.1016/S1359-6454(98)00077-910.1016/S1359-6454(98)00077-9 ↗
54. Avrami M (1940) Kinetics of phase change II: transformation-time relations for random distribution of nuclei. J Chem Phys 8:212–224. https://doi.org/10.1063/1.175063110.1063/1.1750631 ↗
55. Gu S, Zhang L, Zhang C, Shen W (2016) Constitutive modeling for flow stress behavior of Nimonic 80a superalloy during hot deformation process. High Temp Mater Proc 35:327–336. https://doi.org/10.1515/htmp-2014-020410.1515/htmp-2014-0204 ↗
56. Wang M, Li Y, Wen W, Zhou J, Chiba A (2013) Quantitative analysis of work hardening and dynamic softening behavior of low carbon alloy steel based on the flow stress. Mater Des 45:384–392. https://doi.org/10.1016/j.matdes.2012.08.04110.1016/j.matdes.2012.08.041 ↗
57. Kim KW, Park JK (2015) A study of the dynamic recrystallization kinetics of V-microalloyed medium carbon steel. J Mater Sci 50(18):6142–6153. https://doi.org/10.1007/s10853-015-9171-110.1007/s10853-015-9171-1 ↗
58. Cao Y, Di H, Misra RDK, Yi X, Zhang J, Ma T (2014) On the hot deformation behavior of AISI 420 stainless steel based on constitutive analysis and CSL model. Mater Sci Eng A 593:111–119. https://doi.org/10.1016/j.msea.2013.11.03010.1016/j.msea.2013.11.030 ↗