Combining carbon nanotube foam with nanosilver/silicone resin or graphene foam for advanced metamaterial design
Source abstract
Abstract
Advanced metamaterials are designed upon the combination of (1) carbon nanotube (CNT) foam, which is obtained from chemical vapor deposition by fully consuming the initial nickel foam, and (2) nanosilver/silicone resin or graphene (Gr) foam. The CNT foam/nanosilver/silicone composite simultaneously exhibits a negative permittivity and permeability in the frequency range from 1 MHz to 1 GHz provided that the appropriate CNT foam amount is considered (20 m%). Double-negative performance in a similar frequency range is obtained with both 3/1 and 1/1 (mass basis) Gr/CNT-based composites. On the other hand, 3/2 (mass basis) Gr/CNT exhibits a negative permeability in the shared frequency range from 6 × 102 MHz to 1 GHz with still negative permittivity in the full range. The Gr amount allows to control the frequency behavior, with a variation in absolute permittivity and permeability values and a switch between a concave and convex behavior. Hence, the work contributes to the further expanding of the application range of metamaterials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Pendry JB, Holden AJ, Robbins DJ, Stewart WJ (1999) Magnetism from conductors and enhanced nonlinear phenomena. IEEE Trans Microw Theory Tech 47:2075–2084. https://doi.org/10.1109/22.79800210.1109/22.798002 ↗
2. Veselago VG (1968) The electrodynamics of substances WiTH simultaneously negative values of ε and µ. Sov Phys Uspekhi 10:509–514. https://doi.org/10.1070/pu1968v010n04abeh00369910.1070/pu1968v010n04abeh003699 ↗
3. Mills DL, Burstein E (1974) Polaritons: the electromagnetic modes of media. Rep Prog Phys 37:817–926. https://doi.org/10.1088/0034-4885/37/7/00110.1088/0034-4885/37/7/001 ↗
4. Shu C, Caillé A (1982) Surface magnetic polaritons on uniaxial antiferromagnets. Solid State Commun 42:233–238. https://doi.org/10.1016/0038-1098(82)91012-210.1016/0038-1098(82)91012-2 ↗
5. Hartstein A, Burstein E, Maradudin AA et al (1973) Surface polaritons on semi-infinite gyromagnetic media. J Phys C Solid State Phys 6:1266–1276. https://doi.org/10.1088/0022-3719/9/12/01710.1088/0022-3719/9/12/017 ↗
6. Zhu J, Wei S, Zhang L et al (2011) Polyaniline-tungsten oxide metacomposites with tunable electronic properties. J Mater Chem 21:342–348. https://doi.org/10.1039/c0jm02090g10.1039/c0jm02090g ↗
7. Zhu J, Wei S, Zhang L et al (2010) Conductive polypyrrole/tungsten oxide metacomposites with negative permittivity. J Phys Chem C 114:16335–16342. https://doi.org/10.1021/jp106246310.1021/jp1062463 ↗
8. Zhu J, Wei S, Ryu J, Guo Z (2011) Strain-sensing elastomer/carbon nanofiber “metacomposites”. J Phys Chem C 115:13215–13222. https://doi.org/10.1021/jp202999c10.1021/jp202999c ↗
9. Zhu WM, Liu AQ, Zhang XM et al (2011) Switchable magnetic metamaterials using micromachining processes. Adv Mater 23:1792–1796. https://doi.org/10.1002/adma.20100434110.1002/adma.201004341 ↗
10. Shi ZC, Fan RH, Zhang ZD et al (2012) Random Composites of nickel networks supported by porous alumina toward double negative materials. Adv Mater 24:2349–2352. https://doi.org/10.1002/adma.20120015710.1002/adma.201200157 ↗
11. Cadman JE, Zhou S, Chen Y, Li Q (2013) On design of multi-functional microstructural materials. J Mater Sci 48:51–66. https://doi.org/10.1007/s10853-012-6643-410.1007/s10853-012-6643-4 ↗
12. Sadecka K, Berger MH, Orlinski K et al (2017) Evolution of silver in a eutectic-based Bi2O3–Ag metamaterial. J Mater Sci 52:5503–5510. https://doi.org/10.1007/s10853-016-0746-210.1007/s10853-016-0746-2 ↗
13. Yao X, Kou X, Qiu J (2016) Multi-walled carbon nanotubes/polyaniline composites with negative permittivity and negative permeability. Carbon N Y 107:261–267. https://doi.org/10.1016/j.carbon.2016.05.05510.1016/j.carbon.2016.05.055 ↗
14. Kou X, Yao X, Qiu J (2017) Carbon nanofibers/polypyrrole nano metacomposites. J Polym Sci Part B Polym Phys 55:1724–1729. https://doi.org/10.1002/polb.2440710.1002/polb.24407 ↗
15. Zhu J, Luo Z, Wu S et al (2012) Magnetic graphene nanocomposites: electron conduction, giant magnetoresistance and tunable negative permittivity. J Mater Chem 22:835–844. https://doi.org/10.1039/c1jm14172d10.1039/c1jm14172d ↗
16. Tang ZCW, Sun L, Li B, Zhong WH (2012) Structurally induced dielectric constant promotion and loss suppression for poly(vinylidene fluoride) nanocomposites. Macromol Mater Eng 297:420–426. https://doi.org/10.1002/mame.20110023010.1002/mame.201100230 ↗
17. Huang Z, Chen H, Huang Y et al (2018) Ultra-Broadband Wide-Angle Terahertz Absorption Properties of 3D Graphene Foam. Adv Funct Mater 28:1–8. https://doi.org/10.1002/adfm.20170436310.1002/adfm.201704363 ↗
18. Silveirinha MG (2009) Broadband negative refraction with a crossed wire mesh. Phys Rev B Condens Matter Mater Phys 79:1–4. https://doi.org/10.1103/PhysRevB.79.15310910.1103/PhysRevB.79.153109 ↗
19. Ding P, Liang EJ, Hu WQ et al (2009) Numerical simulations of terahertz double-negative metamaterial with isotropic-like fishnet structure. Photon Nanostruct Fundam Appl 7:92–100. https://doi.org/10.1016/j.photonics.2008.12.00510.1016/j.photonics.2008.12.005 ↗
20. Economou EN, Koschny T, Soukoulis CM (2008) Strong diamagnetic response in split-ring-resonator metamaterials: numerical study and two-loop model. Phys Rev B Condens Matter Mater Phys 77:5–8. https://doi.org/10.1103/PhysRevB.77.09240110.1103/PhysRevB.77.092401 ↗
21. Zhu J, Gu H, Luo Z et al (2012) Carbon nanostructure-derived polyaniline metacomposites: electrical, dielectric, and giant magnetoresistive properties. Langmuir 28:10246–10255. https://doi.org/10.1021/la302031f10.1021/la302031f ↗
22. Qian L, Lu L, Fan R (2015) Tunable negative permittivity based on phenolic resin and multi-walled carbon nanotubes. RSC Adv 5:16618–16621. https://doi.org/10.1039/c4ra15413d10.1039/c4ra15413d ↗
23. Zhang X, Yan X, He Q et al (2015) Electrically conductive polypropylene nanocomposites with negative permittivity at low carbon nanotube loading levels. ACS Appl Mater Interfaces 7:6125–6138. https://doi.org/10.1021/am508218310.1021/am5082183 ↗
24. Yin R, Wu H, Sun K et al (2018) Fabrication of graphene network in alumina ceramics with adjustable negative permittivity by spark plasma sintering. J Phys Chem C 122:1791–1799. https://doi.org/10.1021/acs.jpcc.7b1117710.1021/acs.jpcc.7b11177 ↗
25. Jiao Z, D’hooge DR, Cardon L, Qiu J (2020) Elegant design of carbon nanotube foams with double continuous structure for metamaterials in a broad frequency range. J Mater Chem C 8:3226–3234. https://doi.org/10.1039/c9tc06291b10.1039/c9tc06291b ↗
26. Li S, Hanbing M, Li Y, Xiuyun L (2011) Preparation and dielectric properties of nano-silver/epoxy composites. Ind Chem Eng Prog. https://doi.org/10.16085/j.issn.1000-6613.2011.08.02810.16085/j.issn.1000-6613.2011.08.028 ↗
27. Maslovski SI, Tretyakov SA, Belov PA (2002) Wire media with negative effective permittivity: a quasi-static model. Microw Opt Technol Lett 35:47–51. https://doi.org/10.1002/mop.1051210.1002/mop.10512 ↗