Electrospun membranes of low molecular weight di-stereoblock poly(lactic acid)s with high thermal stability and solvent resistance via low temperature sintering
Source abstract
Abstract
Electrospinning is a highly efficient mild method to obtain stereocomplex poly(lactic acid) fibers from blends of high molecular weight (MW) poly(L-lactic acid) (PLLA) and poly(D-lactic acid) (PDLA). However, high MW PLAs are expensive and proved difficult to avoid homocrystallites which weaken the performances. Here, di-stereoblock poly(lactic acid)s (di-sb-PLAs) with low MW of 104 g mol−1 were synthesized and electrospun into membranes. The stereocomplex (sc) crystallites were induced by sintering the amorphous as-spun membranes at 200 °C, and further improved by applying 1 MPa pressure which promoted the segment migration across fiber intersections and welded the fibers by forming new sc crystallites. Due to more readily crystallize at molecular level than the blend of PLLA and PDLA, the sintered di-sb-PLA membranes exhibited higher thermal stability, better tensile strength, and were more stable during multiple cycles of selective separating solvent and water mixtures. Increasing MW of di-sb-PLA positively affected the membrane properties and inhibited dramatical embrittlement that occurred in sintered membrane of PLLA and PDLA blend.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Carbon dioxide utilization in catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Sharma R, Jafari SM, Sharma S (2020) Antimicrobial bio-nanocomposites and their potential applications in food packaging. Food Control 112:10708610.1016/j.foodcont.2020.107086 ↗
2. Kuan C, Chiang C, Shen M, Kuan H (2020) The study on coffee biomass composite materials and their application on green golf grip. Mod Phys Lett B 34:2040009
3. Wang X, Pan Y, Yuan H, Su M, Shao C, Liu C, Guo Z, Shen C, Liu X (2020) Simple fabrication of superhydrophobic PLA with honeycomb-like structures for high-efficiency oil-water separation. Chin Chem Lett 31:365–36810.1016/j.cclet.2019.07.044 ↗
4. Cacciotti I, Pallotto F, Scognamiglio V, Moscone D, Arduini F (2020) Reusable optical multi-plate sensing system for pesticide detection by using electrospun membranes as smart support for acetylcholinesterase immobilisation. Mater SciEng C Mater Biol Appl 111:11074410.1016/j.msec.2020.110744 ↗
5. Cacciotti I, Mori S, Cherubini V, Nanni F (2018) Eco-sustainable systems based on poly(lactic acid), diatomite and coffee grounds extract for food packaging. Int J Biol Macromol 112:567–57510.1016/j.ijbiomac.2018.02.018 ↗
6. Cacciotti I, Ciocci M, Di Giovanni E, Nanni F, Melino S (2018) Hydrogen sulfide-releasing fibrous membranes: potential patches for stimulating human stem cells proliferation and viability under oxidative stress. Int J Mol Sci 19:236810.3390/ijms19082368 ↗
7. Cacciotti I, Chronopoulou L, Palocci C, Amalfitano A, Cantiani M, Cordaro M, Lajolo C, Calla C, Boninsegna A, Lucchetti D, Gallenzi P, Sgambato A, Nocca G, Arcovito A (2018) Controlled release of 18-beta-glycyrrhetic acid by nanodelivery systems increases cytotoxicity on oral carcinoma cell line. Nanotechnology 29:28510110.1088/1361-6528/aabecc ↗
8. Speranza V, De Meo A, Pantani R (2014) Thermal and hydrolytic degradation kinetics of PLA in the molten state. Polym Degrad Stab 100:37–4110.1016/j.polymdegradstab.2013.12.031 ↗
9. Andersson SR, Hakkarainen M, Albertsson AC (2012) Long-term properties and migration of low molecular mass compounds from modified PLLA materials during accelerated ageing. Polym Degrad Stab 97:914–92010.1016/j.polymdegradstab.2012.03.028 ↗
10. Han LL, Xie Q, Bao JN, Shan GR, Bao YZ, Pan PJ (2017) Click chemistry synthesis, stereocomplex formation, and enhanced thermal properties of well-defined poly(L-lactic acid)-b-poly(D-lactic acid) stereo diblock copolymers. Polym Chem 8:1006–101610.1039/C6PY01989G ↗
11. Hirata M, Kimura Y (2008) Thermomechanical properties of stereoblock poly(lactic acid)s with different PLLA/PDLA block compositions. Polymer 49:2656–266110.1016/j.polymer.2008.04.014 ↗
12. Tsuji H, Ikada Y (1992) Stereocomplex formation between enantiomeric poly(lactic acid)s. 6. Binary blends from copolymers. Macromolecules 25:5719–572310.1021/ma00047a024 ↗
13. Yui N, Dijkstra PJ, Feijen J (1990) Stereo block copolymers of L- and D-lactides. Macromol Chem Phys 191:481–48810.1002/macp.1990.021910303 ↗
14. Brizzolara D, Cantow H, Diederichs K, Keller E, Domb AJ (1996) Mechanism of the stereocomplex formation between enantiomeric poly(lactide)s. Macromolecules 29:191–19710.1021/ma951144e ↗
15. Schmidt SC, Hillmyer MA (2001) Polylactide stereocomplex crystallites as nucleating agents for isotactic polylactide. J Polym Sci Pt B Polym Phys 39:300–31310.1002/1099-0488(20010201)39:3<300::AID-POLB1002>3.0.CO;2-M ↗
16. Chen JY, Su CY, Hsu CH, Zhang YH, Zhang QC, Chang CL, Hua CC, Chen WC (2019) Solvent effects on morphology and electrical properties of poly(3-hexylthiophene) electrospun nanofibers. Polymers 11:1501
17. Sun C, Cagri Ayranci, Chen Y, Boluk Y (2017) Can extensional flow rupture macromolecules in an electrospinning process? J Polym Sci Pt B Polym Phys 55:1051–105410.1002/polb.24352 ↗
18. Zhang X, Nakagawa R, Chan KHK, Kotaki M (2012) Mechanical property enhancement of polylactide nanofibers through optimization of molecular weight, electrospinning conditions, and stereocomplexation. Macromolecules 45:5494–550010.1021/ma300289z ↗
19. Tsuji H, Nakano M, Hashimoto M, Takashima K, Katsura S, Mizuno A (2006) Electrospinning of Poly(lactic acid) Stereocomplex Nanofibers. Biomacromol 7:3316–332010.1021/bm060786e ↗
20. Furuhashi Y, Kimura Y, Yoshie N, Yamane H (2006) Higher-order structures and mechanical properties of stereocomplex-type poly(lactic acid) melt spun fibers. Polymer 47:5965–597210.1016/j.polymer.2006.06.001 ↗
21. Furuhashi Y, Kimura Y, Yoshie N (2006) Self-assembly of stereocomplex-type poly(lactic acid). Polym J 38:1061–106710.1295/polymj.PJ2005214 ↗
22. Li L, Hashaikeh R, Arafat HA (2013) Development of eco-efficient micro-porous membranes via electrospinning and annealing of poly (lactic acid). J Memb Sci 436:57–6710.1016/j.memsci.2013.02.037 ↗
23. Liu HL, Bai DY, Bai HW, Zhang Q, Fu Q (2015) Constructing stereocomplex structures at the interface for remarkably accelerating matrix crystallization and enhancing the mechanical properties of poly(L-lactide)/multi-walled carbon nanotube nanocomposites. J Mater Chem A 3:13835–1384710.1039/C5TA02017D ↗
24. Jing Y, Zhang L, Huang R, Bai D, Bai H, Zhang Q, Fu Q (2017) Ultrahigh-performance electrospun polylactide membranes with excellent oil/water separation ability via interfacial stereocomplex crystallization. J Mater Chem A 5:19729–1973710.1039/C7TA05379G ↗
25. Tsuji H, Hyon S, Ikada Y (1991) Stereocomplex formation between enantiomeric poly(lactic acid)s. 3. Calorimetric studies on blend films cast from dilute solution. Macromolecules 24:5651–565610.1021/ma00020a026 ↗
26. Pan PJ, Han LL, Bao JN, Xie Q, Shan GR, Bao YZ (2015) Competitive Stereocomplexation, Homocrystallization, and Polymorphic Crystalline Transition in Poly(L-lactic acid)/Poly(D-lactic acid) Racemic Blends: molecular Weight Effects. J Phys Chem B 119:6462–647010.1021/acs.jpcb.5b03546 ↗
27. Masutani K, Kobayashi K, Kimura Y, Lee CW (2018) Properties of stereo multi-block polylactides obtained by chain-extension of stereo tri-block polylactides consisting of poly(L-lactide) and poly(D-lactide). J Polym Res 25:7410.1007/s10965-018-1444-3 ↗
28. Widhianto YW, Yamamoto M, Masutani K, Kimura Y, Yamane H (2017) Effect of the block length and the molecular weight on the isothermal crystallization behavior of multi-stereoblock poly(lactic-acid)s. Polym Degrad Stab 142:178–18710.1016/j.polymdegradstab.2017.06.019 ↗
29. Tsuji H, Ikada Y (1999) Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. Mechanical properties and morphology of solution-cast films. Polymer 40:6699–670810.1016/S0032-3861(99)00004-X ↗
30. Hirata M, Kobayashi K, Kimura Y (2010) Synthesis and properties of high-molecular-weight stereo di-block polylactides with nonequivalent D/L ratios. J Polym Sci A 48:794–80110.1002/pola.23827 ↗
31. Tsuji H, Wada T, Sakamoto Y, Sugiura Y (2010) Stereocomplex crystallization and spherulite growth behavior of poly(L-lactide)-b-poly(D-lactide) stereodiblock copolymers. Polymer 51:4937–494710.1016/j.polymer.2010.08.010 ↗
32. Han LL, Shan GR, Bao YZ, Pan PJ (2015) Exclusive stereocomplex crystallization of linear and multiarm star-shaped high-molecular-weight stereo diblock poly(lactic acid)s. J Phys Chem B 119:14270–1427910.1021/acs.jpcb.5b06757 ↗
33. Widhianto YW, Yamamoto M, Masutani K, Kimura Y, Yamane H (2017) Thermal properties of the multi-stereo block poly(lactic acid)s with various block lengths. Polym Degrad Stab 142:188–19710.1016/j.polymdegradstab.2017.06.016 ↗
34. Li Y, Li Q, Yang G, Ming R, Yu M, Zhang H, Shao H (2018) Evaluation of thermal resistance and mechanical properties of injected molded stereocomplex of poly(l-lactic acid) and poly(d-lactic acid) with various molecular weights. Adv Polym Tech 37:1674–168110.1002/adv.21824 ↗
35. Gazzano M, Gualandi C, Zucchelli A, Sui T, Korsunsky AM, Reinhard C, Focarete ML (2015) Structure-morphology correlation in electrospun fibers of semicrystalline polymers by simultaneous synchrotron SAXS-WAXD. Polymer 63:154–16310.1016/j.polymer.2015.03.002 ↗
36. Huang C, Thomas NL (2018) Fabricating porous poly(lactic acid) fibres via electrospinning. Eur Polym J 99:464–47610.1016/j.eurpolymj.2017.12.025 ↗
37. Chen H-C, Tsai C-H, Yang M-C (2011) Mechanical properties and biocompatibility of electrospun polylactide/poly(vinylidene fluoride) mats. J Polym Res 18:319–32710.1007/s10965-010-9421-5 ↗
38. Zhang X, Shi F, Niu J, Jiang Y, Wang Z (2008) Superhydrophobic surfaces: from structural control to functional application. J Mater Chem 18:621–63310.1039/B711226B ↗
39. Wei XF, Bao RY, Cao ZQ, Yang W, Xie BH, Yang MB (2014) Stereocomplex crystallite network in asymmetric PLLA/PDLA Blends: formation, structure, and confining effect on the crystallization rate of homocrystallites. Macromolecules 47:1439–144810.1021/ma402653a ↗
40. Yang B, Wang R, Ma H, Li X, Brunig H, Dong Z, Qi Y, Zhang X (2018) Structure Mediation and Properties of Poly(l-lactide)/Poly(d-lactide) Blend Fibers. Polymers 10:1353
41. Cacciotti I, House JN, Mazzuca C, Valentini M, Madau F, Palleschi A, Straffi P, Nanni F (2015) Neat and GNPs loaded natural rubber fibers by electrospinning: manufacturing and characterization. Mater Des 88:1109–111810.1016/j.matdes.2015.09.054 ↗
42. Zhang P, Tian R, Na B, Lv R, Liu Q (2015) Intermolecular ordering as the precursor for stereocomplex formation in the electrospun polylactide fibers. Polymer 60:221–22710.1016/j.polymer.2015.01.049 ↗
43. Arias V, Odelius K, Hoglund A, Albertsson AC (2015) Homocomposites of polylactide (PLA) with induced interfacial stereocomplex crystallites. ACS Sustain Chem Eng 3:2220–223110.1021/acssuschemeng.5b00498 ↗
44. Cam D, Marucci M (1997) Influence of residual monomers and metals on poly (l-lactide) thermal stability. Polymer 38:1879–188410.1016/S0032-3861(96)00711-2 ↗
45. Tsuji H, Fukui I (2003) Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending. Polymer 44:2891–289610.1016/S0032-3861(03)00175-7 ↗
46. Bianco A, Calderone M, Cacciotti I (2013) Electrospun PHBV/PEO co-solution blends: microstructure, thermal and mechanical properties. Mater Sci Eng C 33:1067–107710.1016/j.msec.2012.11.030 ↗
47. Cacciotti I, Calderone M, Bianco A (2013) Tailoring the properties of electrospun PHBV mats: co-solution blending and selective removal of PEO. Eur Polym J 49:3210–322210.1016/j.eurpolymj.2013.06.024 ↗
48. Cacciotti I, Fortunati E, Puglia D, Kenny JM, Nanni F (2014) Effect of silver nanoparticles and cellulose nanocrystals on electrospun poly(lactic) acid mats: morphology, thermal properties and mechanical behavior. Carbohydr Polym 103:22–3110.1016/j.carbpol.2013.11.052 ↗
49. Zhang X, Geven MA, Grijpma DW, Gautrot JE, Peijs T (2016) Polymer-polymer composites for the design of strong and tough degradable biomaterials. Mater Today Commun 8:53–6310.1016/j.mtcomm.2016.05.001 ↗
50. Monticelli O, Putti M, Gardella L, Cavallo D, Basso A, Prato M, Nitti S (2014) New Stereocomplex PLA-Based Fibers: effect of POSS on Polymer Functionalization and Properties. Macromolecules 47:4718–472710.1021/ma500528a ↗