In vitro wear characteristics of a nano-hydroxyapatite filled dental resin composite under two-body wear condition
Source abstract
Abstract
The aim of this work is to fabricate and characterize the Bis-GMA-based nano-hydroxyapatite (n-HAP) filled dental resin composites (DRCs) which comply with oral tribological behavior. The seven series (i.e., 0, 4, 8, and 12 wt%) of each MPTS ((3-methacryloxypropyl) trimethoxysilane)- and APTES (3-aminopropyl)-treated n-HAP-filled composites were prepared. These DRCs were characterized for void contents, vickers microhardness, and volumetric wear under dynamic working conditions (normal load, speed, and temperature) in artificial saliva medium. In order to perform the volumetric wear experiment, the masticatory movement was simulated by using a dental wear simulator in eight profile motion. The wear tests were conducted as per steady-state and Taguchi (L16) orthogonal array; further, ANOVA analysis was employed to define the contribution of each considered process parameter. The findings of the experiment and ANOVA result reveal that n-HAP filler content has a greater contribution (95%) in improving the wear resistance ability of DRCs. In concerned with the unfilled dental material, 12 wt% of MPTS- and APTES-modified n-HAP-filled DRCs shows maximum microhardness [i.e., 34.10 Hv (39.52% improvement) for DRCs-12M and 33.32 Hv (36.33% improvement) for DRCs-12A] and minimum volumetric wear in the artificial saliva medium. According to the orthogonal setting of the design of the experiment, volumetric wear of dental composite was improved by 15.164% for DRCs-12M (i.e., A4B2C3D1) and 17.647% for DRCs-12A (i.e., A4B3C2D4) under two-body wear condition (artificial saliva medium). The W-SEM analysis after 20,000 mastication cycles in artificial saliva medium indicates that wear surfaces of DRCs were predominantly affected by the abrasion and adhesion phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Lambrechts P, Goovaerts K, Bharadwaj D, De Munck J, Bergmans L, Peumans M (2006) Degradation of tooth structure and restorative materials: a review. Wear 261:980–98610.1016/j.wear.2006.03.030 ↗
2. Heintze SD (2006) How to qualify and validate wear simulation devices and methods. Dent Mater 22:712–73410.1016/j.dental.2006.02.002 ↗
3. Jandt BW, Sigusch KD (2009) Future perspectives of resin-based dental materials. Dent Mater 25:1001–100610.1016/j.dental.2009.02.009 ↗
4. Ferracane J (2011) Resin composite: state of the art. Dent Mater 27:29–3810.1016/j.dental.2010.10.020 ↗
5. Antunes RA (2005) Reciprocating wear test of dental composites: effect on the antagonist”. Wear 259:1005–101110.1016/j.wear.2005.02.067 ↗
6. Belli R, Geinzer E, Muschweck A, Petschelt A (2014) Mechanical fatigue degradation of ceramics versus resin composites for dental restorations”. Dent Mater 30:424–43210.1016/j.dental.2014.01.003 ↗
7. Bagheri R, Tyas MJ (2007) Subsurface degradation of resin-based composites. Dent Mater 23:944–95110.1016/j.dental.2006.06.035 ↗
8. Da Costa J, Adams-Belusku A, Riley K (2010) The effect of various dentifrices on surface roughness and gloss of resin composites. J Dent 38:123–12810.1016/j.jdent.2010.02.005 ↗
9. Gozález-Cabezas C, Hara AT, Hefferren J (2013) Abrasivity testing of dentifrices: challenges and current state of the art. Monogr Oral Sci 23:100–10710.1159/000350476 ↗
10. Souza JCM et al (2016) Abrasive and sliding wear of resin composites for dental restorations. Tribol Int 102:154–16010.1016/j.triboint.2016.05.035 ↗
11. León RCRGBL, Del Bel Cury AA (2008) Loss of residual monomer from resilient lining materials processed by different methods. Rev Odonto Ciênc 23:215–219
12. Tsujimoto A et al (2018) Wear of resin composites: current insights into underlying mechanisms, evaluation methods and influential factors. Jpn Dent Sci Rev 54(2):76–8710.1016/j.jdsr.2017.11.002 ↗
13. Ujiie M, Tsujimoto A, Barkmeier WW, Tinoco JV, Jurado CA, Takamizawa T, Latta MA (2020) Comparison of occlusal wear between bulk-fill and conventional flowable resin composite. Am J Dent. 33(2):74–78
14. Klapdohr S (2005) New inorganic components for dental filling composites. Chem. Mon. 136:21–4510.1007/s00706-004-0254-y ↗
15. Gosmão E, Melo J, Ramos C, Santos R, Araújo A (2003) Clinical application of dentifrices. Int J Dent 1:231–235
16. Lambrechts BVMP, Debels E, Van Landuyt K, Peumans M (2006) How to simulate wear? Overview of existing methods. Dent Mater 22:693–70110.1016/j.dental.2006.02.004 ↗
17. Powell RDNJM, Phillips RW (1975) In vitro wear response of composite resin, amalgam, and enamel. J Dent Res 54:1183–119510.1177/00220345750540061501 ↗
18. Lee PDKHL, Orlowski JA (1975) Surface roughness of composite filling materials. Biomater Med Dev Artif Organs 3:503–51910.3109/10731197509118641 ↗
19. Altaie NL, Bubb P, Franklin AHD, Fleming GJP, Wood DJ (2017) An approach to understanding tribological behaviour of dental composites through volumetric wear loss and wear mechanism determination. Beyond Mater Rank 59:41–47
20. Benetti GJPAR, Laren L, Dowling AH (2016) Fleming, Assessment of wear facets produced by the ACTA wear machine. J Dent 45:19–2510.1016/j.jdent.2015.12.003 ↗
21. Mair LH, Stolarski TA, Vowles RW, Lloyd CH (1996) Wear: mechanisms, manifestations and measurement. Report of a workshop. J Dent 24:141–14810.1016/0300-5712(95)00043-7 ↗
22. Antunes PV, Ramalho A (2009) Influence of pH values and aging time on the tribological behaviour of posterior restorative materials. Wear 267:718–72510.1016/j.wear.2008.12.054 ↗
23. DeLong R (2006) Intra-oral restorative materials wear: rethinking the current approaches: how to measure wear. Dent Mater 22:702–71110.1016/j.dental.2006.02.003 ↗
24. Finlay GJPFN, Hahnel S, Dowling AH (2013) The in vitro wear behavior of experimental resin-based composites derived from a commercial formulation. Dent Mater 29:365–37410.1016/j.dental.2012.12.005 ↗
25. Fleming OAGJP, Reilly E, Dowling AH (2016) Data acquisition variability using profilometry to produce accurate mean total volumetric wear and mean maximum wear depth measurements for the OHSU oral wear simulator. Dent Mater 32:e176–e18410.1016/j.dental.2016.05.004 ↗
26. Heintze VRSD, Cavalleri A, Forjanic M, Zellweger G (2006) A comparison of three different methods for the quantification of the in vitro wear of dental materials. Dent Mater 22:1051–106210.1016/j.dental.2005.08.010 ↗
27. Dowling GJPFAH (2007) The impact of montmorillonite clay addition on the in vitro wear resistance of a glass-ionomer restorative. J Dent 35:309–31710.1016/j.jdent.2006.10.002 ↗
28. Arsecularatne JA, Chung NR, Hoffman M (2016) An in vitro study of the wear behaviour of dental composites. Biosurf Biotribol 2(3):102–11310.1016/j.bsbt.2016.09.002 ↗
29. Yadav S, Gangwar S (2019) The effectiveness of functionalized nano- hydroxyapatite filler on the physical and mechanical properties of novel dental restorative composite”. Int J Polym Mater Polym Biomater 40:3703–3710
30. Raj S, Nesa O (2017) Analysis of multi objective optimisation using TOPSIS method in EDM process with CNT infused copper electrode. Int J Mach Mach Mater 19(1):76–94
31. Chadwick RG, McCabe JF, Walls AWG (1989) The effect of placement technique upon the compressive strength and porosity of a composite resin. J Dent 17:230–23310.1016/0300-5712(89)90171-1 ↗
32. Elbishari H, Silikas N, Satterthwaite J (2012) Filler size of resin-composites, percentage of voids and fracture toughness: Is there a correlation ? Dent Mater J 31(4):523–52710.4012/dmj.2011-256 ↗
33. Chaidarun S, Leevailoj C (2018) Evaluation of voids in class II restorations restored with bulk-fill and conventional nanohybrid resin composite. https://doi.org/10.14456/jdat.2018.1610.14456/jdat.2018.16 ↗
34. Foroutan F, Javadpour J, Khavandi A, Atai M (2011) Mechanical properties of dental composite materials reinforced with micro and nano-size AL2O3 filler particles. Iran J Mater Sci Eng 2:25–33
35. Sudheer M, Prabhu R, Raju K (2014) Effect of filler content on the performance of epoxy/PTW composites. Adv Mater Sci Eng 2014:1–1110.1155/2014/970468 ↗
36. Proschel M, Hofmann P (1988) Frontal chewing patterns of the incisor point and their dependence on resistance of food and type of occlusion. J Prosthet Dent 59:617–62410.1016/0022-3913(88)90082-0 ↗
37. Pierson JL, Magnen A (1970) Study of food textures by recording of chewing and swallowing movements. J Texture Stud 1:327–33710.1111/j.1745-4603.1970.tb00733.x ↗
38. Ashiga E, Takei J, Magara R Takeishi, Tsujimura T (2019) Effect of attention on chewing and swallowing behaviors in healthy humans. Sci Rep 19:1–9
39. Lund JP, Kolta A, Westberg KG, Scott G (1998) Brainstem mechanisms underlying feeding behaviors. Curr Opin Neurobiol 8:718–72410.1016/S0959-4388(98)80113-X ↗
40. Curby WA (1958) A simplified instrument for measurement of food platform area. J Dent Res 32:328–33110.1177/00220345530320030601 ↗
41. Slavicek G (2010) Human mastication. Springer, Berlin, pp 29–41
42. Ruben JL, Roeters FJM, Montagner AF (2014) A multifunctional device to simulate oral ageing: the ‘Rub&Roll’. J Mech Behav Biomed Mater 30:75–8210.1016/j.jmbbm.2013.10.019 ↗
43. Shinkai Y, Taira S, Suzuki M (2018) Effect of filler size and filler loading on wear of experimental flowable resin composites. Dent Mater J 26:1–6
44. Wise DL (1995) Encyclopedic handbook of biomaterials and bioengineering: part B: applications 4 V set. CRC Press, Baco Raton
45. Kumar SR, Patnaik A, Bhat IK (2017) The in vitro wear behavior of nanozirconia-filled dental composite in food slurry condition. Proc Inst Mech Eng Part J J Eng Tribol 231(1):23–4010.1177/1350650116641329 ↗
46. Meena A, Mali HS, Patnaik A, Kumar SR (2019) Investigation of wear behavior of nanoalumina and marble dust-reinforced dental composites. Sci Eng Compos Mater 26(1):84–9610.1515/secm-2017-0152 ↗
47. Lutz FBF, Krejci I (1992) Chewing pressure vs. wear of composites and opposing enamel cusps. J Dent Res 71:1525–152910.1177/00220345920710081201 ↗
48. Ghazal M, Kern M (2009) Wear of human enamel and nano-filled composite resin denture teeth under different loading forces. J Oral Rehabil 36:58–6410.1111/j.1365-2842.2008.01904.x ↗
49. Zhou Q (1996) Ping Huang, “Abrasive wear model for lubricated sliding contacts”. Wear 196(1–2):72–7610.1016/0043-1648(95)06851-1 ↗
50. Komino M, Shiga H (2017) “Changes in mandibular movement during chewing of different hardness foods. Odontology 105:418–42510.1007/s10266-016-0292-z ↗
51. Miyawaki S, Ohkochi N, Kawakami T (2000) Effect of food size on the movement of the mandibular first molars and condyles during deliberate unilateral mastication in humans. J Dent Res. 79:1525–153110.1177/00220345000790071601 ↗
52. Hvizdos P, Puchy V, Duszova A (2010) Tribological behavior of carbon nanofiber–zirconia composite. Scr Mater 63:254–25710.1016/j.scriptamat.2010.03.069 ↗
53. Yoshida T, Ishikawa H, Yoshida N (2009) Analysis of masseter muscle oxygenation and mandibular movement during experimental gum chewing with different hardness. Acta Odontol Scand 67:113–12110.1080/00016350802715806 ↗
54. Cilli R, Pereira JC (2012) Properties of dental resins submitted to pH catalysed hydrolysis. J. Dent. 40:1144–115010.1016/j.jdent.2012.09.012 ↗
55. Manhart J, Kunzelmann KH, Chen HY (2000) Mechanical properties and wear behaviour of light cured packable composite resins. Dent Mater 16:33–4010.1016/S0109-5641(99)00082-2 ↗
56. Kohyama K, Sawada H, Nonaka M, Kobori C, Sasaki T (2007) Textural evaluation of rice cake by chewing and swallowing measurements on human subjects. Biosci Biotechnol Biochem 71:358–36510.1271/bbb.60276 ↗
57. Grigoriadis A, Johansson RS (2014) Temporal profile and amplitude of human masseter muscle activity is adapted to food properties during individual chewing cycles. J Oral Rehabil. 41:367–37310.1111/joor.12155 ↗
58. Pachori A, Kambalimath H, Maran S, Niranjan B, Bhambhani G (2018) Evaluation of changes in salivary pH after intake of different eatables and beverages in children at different time intervals. Int J Clin Pediatr Dent 11:177–18210.5005/jp-journals-10005-1507 ↗
59. Ramalho A, Carvalho MDB (2013) Effects of temperature on mechanical and tribologicalproperties of dental restorative composite materials. Tribol Int 63:186–19510.1016/j.triboint.2012.04.025 ↗
60. Ferracane JL, Mitchem JC, Condon JR (1997) Wear and marginal breakdown of composites with various degree of cure. J. Dent. Res. 76:1508–151610.1177/00220345970760081401 ↗
61. Mandikos MN, Carter JM (2001) A comparison of the wear resistance and hardness of indirect composite resin. J Prosthet Dent 85:386–39510.1067/mpr.2001.114267 ↗
62. Culhaoglu K (2013) A comparison of the wear resistance and hardness of two different indirect composite resin with a ceramic material, opposed to human enamel. Eur J Gen Dent 2:274–28010.4103/2278-9626.116024 ↗
63. Abenojar J, Martinez MA, Velasco F (2011) Effect of moisture and temperature on the mechanical properties of an epoxy reinforced with boron carbide. J Adhes Sci Technol 25:2445–246010.1163/016942411X580135 ↗