journal article·2020-07Open access

Electrostatic layer-by-layer self-assembly of 1D α-LiFeO2 with enhanced rate capability and cycling performance

Youzuo Hu, Xingquan Liu, Nuria Tapia-Ruiz

Journal of Materials Science· Volume 55· Issue 20

Abstract

Abstract α-LiFeO2is a promising cathode material for lithium-ion batteries due to its theoretically high specific capacity (282 mAh g−1), abundant nature, low cost of raw materials and environmental friendliness. However, the intrinsic sluggish kinetics and poor electronic conductivity of α-LiFeO2prevent its practical use. In this work, we introduce a novel electrostatic layer-by-layer self-assembly method using PAH and PSS charged polyelectrolytes to grow in situ Ag nanoparticles on the surface of α-LiFeO2nanorods to improve the electronic and ionic conductivity in this material. The experimental results show that such tailored design effectively improves the cycling stability and provides the material with a superior rate capability. The Ag-1D α-LiFeO2material delivers a high discharge capacity of 162.6 mAh g−1at 0.5 C and a capacity retention of 89.6% after 50 cycles. The excellent electrochemical behavior may be ascribed to synergistic effects which combine the use of Ag NPs, which provide with improved electronic conductivities, and the large specific surface areas given by the 1D morphology of the nanorods, providing increased lithium and electron conduction pathways.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Armand M, Tarascon JM (2008) Building better batteries. Nature 451:652–65710.1038/451652a ↗
2. Dunn B, Kamath H, Tarascon JM (2011) Electrical energy storage for the grid: a battery of choices. Science 334:928–33410.1126/science.1212741 ↗
3. Whittingham MS (2004) Lithium batteries and cathode materials. Chem Rev 104:4271–430110.1021/cr020731c ↗
4. Sakurai YJ, Arai H, Yamaki HJ (1998) Preparation of electrochemically active α-LiFeO2 at low temperature. Solid State Ion 113:29–3410.1016/S0167-2738(98)00363-4 ↗
5. Lee YS, Sato S, Sun YK, Kobayakawa K, Sato Y (2003) A new type of orthorhombic LiFeO2 with advanced battery performance and its structural change during cycling. J Power Sources 119:285–289
6. Kanno R, Shirane T, Inaba Y, Kawamoto Y (1997) Synthesis and electrochemical properties of lithium iron oxides with layer-related structures. J Power Sources 68:145–15210.1016/S0378-7753(96)02625-0 ↗
7. Ado K, Tabuchi M, Kobayashi H, Kageyama H, Nakamura O (1997) Preparation of LiFeO2 with alpha-NaFeO2-type structure using a mixed-alkaline hydrothermal method. J Electrochem Soc 144:177–18010.1149/1.1837791 ↗
8. Hu Y, Zhao H, Liu X (2018) A simple, quick and eco-friendly strategy of synthesis nanosized alpha-LiFeO2 cathode with excellent electrochemical performance for lithium-ion batteries. Materials 11:117610.3390/ma11071176 ↗
9. Liu H, Ji P, Han X (2016) Rheological phase synthesis of nanosized α-LiFeO2 with higher crystallinity degree for cathode material of lithium-ion batteries. Mater Chem Phys 183:152–15710.1016/j.matchemphys.2016.08.013 ↗
10. Bruce PG, Scrosati B, Tarascon JM (2008) Nanomaterials for rechargeable lithium batteries. Angew Chem 47:2930–294610.1002/anie.200702505 ↗
11. Lu YX, Du SF, Wilckens RS (2018) Evolution of gas diffusion layer structures for aligned Pt nanowire electrodes in PEMFC applications. Electrochim Acta 279:99–10710.1016/j.electacta.2018.05.008 ↗
12. Liang K, He H, Ren Y, Wang H, Liao Y, Huang X (2019) Porous lithium titanate nanosheets as an advanced anode material for sodium ion batteries. J Mater Sci 55:4372–4381. https://doi.org/10.1007/s10853-019-04290-110.1007/s10853-019-04290-1 ↗
13. Yang Z, Li Z, Li P, Gao C, Zhang H (2019) NiO/Ni nanocomposites embedded in 3D porous carbon with high performance for lithium-ion storage. J Mater Sci 55:1659–1672. https://doi.org/10.1007/s10853-019-04075-610.1007/s10853-019-04075-6 ↗
14. Li P, Deng J, Li J, Zeng M, Wang L, Guo J (2019) Multifunctional hollow spheres as sulfur hosts for high-performance Li–S batteries. J Mater Sci 55:3964–3973. https://doi.org/10.1007/s10853-019-04251-810.1007/s10853-019-04251-8 ↗
15. Rahman MM, Wang JZ, Hassan MF, Chou SL, Chen ZX, Liu HK (2011) Nanocrystalline porous α-LiFeO2–C composite: an environmentally friendly cathode for the lithium-ion battery. Energy Environ Sci 4:952–95710.1039/C0EE00527D ↗
16. Rahman MM, Glushenkov AM, Chen ZQ, Dai XJ, Ramireddy T, Chen Y (2013) Clusters of alpha-LiFeO2 nanoparticles incorporated into multi-walled carbon nanotubes: a lithium-ion battery cathode with enhanced lithium storage properties. Phys Chem Chem Phys 15:20371–2037810.1039/c3cp53605j ↗
17. Hu Y, Zhao H, Tan M, Liu J, Shu X, Zhang M, Liu S, Ran Q, Li H, Liu X (2019) Synthesis of α-LiFeO2/graphene nanocomposite via layer by layer self-assembly strategy for lithium-ion batteries with excellent electrochemical performance. J Mater Sci Technol. https://doi.org/10.1016/j.jmst.2019.04.04410.1016/j.jmst.2019.04.044 ↗
18. Guo SP, Ma Z, Li JC, Xue HG (2017) Facile preparation and promising lithium storage ability of α-LiFeO2/porous carbon nanocomposite. J Alloys Compd 711:8–1410.1016/j.jallcom.2017.03.332 ↗
19. Kalantarian MM, Asgari S, Mustarelli P (2014) A theoretical approach to evaluate the rate capability of Li-ion battery cathode materials. J Mater Chem A 2:107–11510.1039/C3TA13387G ↗
20. Li Y, Zhou X, Bai Y, Chen G, Wang Z, Li H, Wu F, Wu C (2017) Building an electronic bridge via Ag decoration to enhance kinetics of iron fluoride cathode in lithium-ion batteries. ACS Appl Mater Interfaces 9:19852–1986010.1021/acsami.7b03980 ↗
21. Zhang H, Zong P, Chen M, Jin H, Bai Y, Li S, Ma F, Xu H, Lian K (2019) In situ synthesis of multilayer carbon matrix decorated with copper particles: enhancing the performance of Si as Anode for Li-ion batteries. ACS Nano 13:3054–306210.1021/acsnano.8b08088 ↗
22. Lin XT, Wang PF, Li P, Yu HX, Qian SS, Shui M, Wang DJ, Long NB, Shu J (2015) Improved the lithium storage capability of BaLi2Ti6O14 by electroless silver coating. Electrochim Acta 186:24–3310.1016/j.electacta.2015.10.175 ↗
23. Kim SH, Choi SY (2015) Fabrication of Cu-coated TiO2 nanotubes and enhanced electrochemical performance of lithium ion batteries. J Electroanal Chem 744:45–5210.1016/j.jelechem.2015.03.007 ↗
24. Zhou WJ, He BL, Li HL (2008) Synthesis, structure and electrochemistry of Ag-modified LiMn2O4 cathode materials for lithium-ion batteries. Mater Res Bull 43:2285–229410.1016/j.materresbull.2007.08.013 ↗
25. Parka KS, Sona JT, Kim SJ, Chung HT, Lee CH, Kang KT, Kim HG (2004) Surface modification by silver coating for improving electrochemical properties of LiFePO4. Solid State Commun 129:311–31410.1016/j.ssc.2003.10.015 ↗
26. Hao Q, Yu Y, Zhao D, Xu C (2015) Composited Co3O4/Ag with flower-like nanosheets anchored on a porous substrate as a high-performance anode for Li-ion batteries. J Mater Chem A 3:15944–1595010.1039/C5TA03658E ↗
27. Yin SS, Zhao D, Ji Q, Xia Y, Xia S, Wang X, Wang M, Ban J, Zhang Y, Metwalli E, Wang X, Xiao Y, Zuo X, Xie S, Fang K, Liang S, Zheng L, Qiu B, Yang Z, Lin Y, Chen L, Wang C, Liu Z, Zhu J, Muller-Buschbaum P, Cheng YJ (2018) Si/Ag/C nanohybrids with in situ incorporation of super-small silver nanoparticles: tiny amount, huge impact. ACS Nano 12:861–87510.1021/acsnano.7b08560 ↗
28. Li Y, Li W, Luo Y, Fang M, Yao X, Shui M, Shu J, Ren Y (2018) The enhanced electrochemical performance of Ag coating Kx Cu1−x O1−γ as high performance anode materials for lithium-ion batteries. J Electroanal Chem 818:114–12310.1016/j.jelechem.2018.04.034 ↗
29. Han X, Huang Y, Gao Q, Yu M, Chen X (2018) High thermal conductivity and mechanical properties of nanotube@Cu/Ag@graphite/aluminum composites. Ind Eng Chem Res 57:10365–1037110.1021/acs.iecr.8b01567 ↗
30. Cheong JY, Youn DY, Kim C, Jung JW, Ogata AF, Bae JG, Kim ID (2018) Ag-coated one-dimensional orthorhombic Nb2O5 fibers as high performance electrodes for lithium storage. Electrochim Acta 269:388–39610.1016/j.electacta.2018.03.028 ↗
31. Xiang Y, Lu S, Jiang SP (2012) Layer-by-layer self-assembly in the development of electrochemical energy conversion and storage devices from fuel cells to supercapacitors. Chem Soc Rev 41:7291–732110.1039/c2cs35048c ↗
32. Richardson JJ, Bjornmalm M, Caruso F (2015) Technology-driven layer-by-layer assembly of nanofilms. Science 348:2491–250110.1126/science.aaa2491 ↗
33. Zhai Y, Xu L, Qian Y (2016) Ce-doped α-FeOOH nanorods as high-performance anode material for energy storage. J Power Sources 327:423–43110.1016/j.jpowsour.2016.07.051 ↗
34. Tian GY, Scheib F, Pfaffmann L, Fiedler A, Chakravadhanula VSK, Balachandran G, Zhao ZJ, Ehrenberg H (2018) Electrostatic self-assembly of LiFePO4 cathodes on a three-dimensional substrate for lithium ion batteries. Electrochim Acta 283:1375–138310.1016/j.electacta.2018.07.088 ↗
35. Wang X, Gao LS, Zhou F, Zhang ZD, Ji MR, Tang CM, Shen T, Zheng HG (2004) Large-scale synthesis of α-LiFeO2 nanorods by low-temperature molten salt synthesis (MSS) method. J Cryst Growth 265:220–22310.1016/j.jcrysgro.2004.02.002 ↗
36. Meng E, Zhang M, Hu Y, Gong F, Zhang LS, Li F (2018) Solid-state attachments of Ag nanoparticles onto the surfaces of LiFePO4 cathode materials for Li storage with enhanced capabilities. Electrochim Acta 265:160–16510.1016/j.electacta.2018.01.160 ↗
37. Sahoo PK, Kumar N, Thiyagarajan S, Thakur D, Panda HS (2018) Freeze-casting of multifunctional cellular 3D-graphene/Ag nanocomposites: synergistically affect supercapacitor, catalytic, and antibacterial properties. ACS Sustain Chem Eng 6:7475–748710.1021/acssuschemeng.8b00158 ↗
38. Shilpa, Sharma A (2017) Template-free synthesis of hollow Li2O–Fe2O3–Ag heterostructures for ultra-high performance Li-ion batteries. J Mater Chem A 5:14220–1422910.1039/C7TA01766A ↗
39. Hao Q, Yu Y, Zhao DY, Xu CX (2015) Composited Co3O4/Ag with flower-like nanosheets anchored on a porous substrate as a highperformance anode for Li-ion batteries. J Mater Chem A 3:15944–1595010.1039/C5TA03658E ↗
40. Wu SH, Liu HY (2007) Low temperature synthesis and electrochemical characteristics of LiFeO2 cathodes. J Power Sources 174:789–79410.1016/j.jpowsour.2007.06.230 ↗
41. Wang Y, Wang J, Liao H, Qian X, Zhu Y, Cheng S (2013) Synthesis and characterization of nanosized α-LiFeO2 with increased electrochemical activity. Int J Electrochem Sci 8:8730–873910.1016/S1452-3981(23)12923-3 ↗
42. Sakurai Y, Arai H, Okada S, Yamaki J (1997) Preparation of electrochemically active α-LiFeO2 at low temperature, low temperature synthesis and electrochemical characteristics of LiFeO2 cathodes. J Power Sources 68:711–71510.1016/S0378-7753(96)02579-7 ↗
43. Morales J, Santos-Peña J (2007) Highly electroactive nanosized α-LiFeO2. Electrochem Commun 9:2116–212010.1016/j.elecom.2007.06.013 ↗
44. Kanno R, Shirane T, Kawamoto Y (1996) Synthesis, structure, and electrochemical properties of a new lithium iron oxide, LiFeO2, with a corrugated layer structure. J Electrochem Soc 8:2435–244110.1149/1.1837027 ↗
45. Yu YL, Li G, Zhou S, Chen X, Lee HW, Yang WS (2017) Self-adaptive Si/reduced graphene oxide scrolls for high-performance Li-ion battery anodes. Carbon 120:397–40410.1016/j.carbon.2017.05.002 ↗