Imaging of boron distribution in steel with neutron radiography and tomography
Source abstract
Abstract
B distribution in steel was investigated using neutron imaging techniques, on a millimetric scale with a spatial resolution below 100 μm. Steel structural components joined using the transient liquid-phase bonding (TLPB) process, with Fe-based B-alloyed foils as filler material, were observed. By means of neutron radiography and with the proposed calibration method, a quantitative profile of B concentration was attained across the joint, in particular in the region where the completion of the TLPB process was achieved. It is noteworthy that B concentration did not exceed the typical specified range of B-alloyed steels. This result explains why prior austenite grain boundaries are boride-free. To test the validity of the measured B concentrations, they were compared with those of the numerically simulated TLPB process. As a result, the calculated and experimentally measured values are in good agreement, within the estimated error. On the other hand, in regions where the TLPB process was not finished, athermally solidified liquid (ASL) was found at the joint, in the form of borides. In addition, neutron tomography enabled us to attain a three-dimensional visualization of the size and distribution of ASL, highlighting its potential as a non-destructive testing technique of TLPB weldments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Physics and Applications · Advanced X-ray and CT Imaging · X-ray Diffraction in Crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Duvall DS, Owczarski WA, Paulonis DF (1974) TLP bonding: a new method for joining heat resistant alloys. Weld J 53:203–214
2. Tuah-Poku I, Dollar M, Massalski TB (1988) A study of the transient liquid phase bonding process applied to a Ag/Cu/Ag sandwich joint. Metall Trans A 19:675–686. https://doi.org/10.1007/BF0264928210.1007/BF02649282 ↗
3. Cook GO, Sorensen CD (2011) Overview of transient liquid phase and partial transient liquid phase bonding. J Mater Sci 46:5305–5323. https://doi.org/10.1007/s10853-011-5561-110.1007/s10853-011-5561-1 ↗
4. Shimizu T, Horio H, Kitou K et al (2002) Method for manufacturing joint of carbon steel pipes suitable for expansion and expanding method. US Patent 6,378,760, 30 Apr 2002. http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearchbool.html&r=1&f=G&l=50&co1=AND&d=PTXT&s1=6,378,760.PN.&OS=PN/6,378,760&RS=PN/6,378,760
5. Di Luozzo N, Doisneau B, Boudard M et al (2014) Microstructural and mechanical characterizations of steel tubes joined by transient liquid phase bonding using an amorphous Fe–B–Si interlayer. J Alloys Compd 615:S18–S22. https://doi.org/10.1016/j.jallcom.2013.11.16110.1016/j.jallcom.2013.11.161 ↗
6. Di Luozzo N, Boudard M, Fontana M (2019) Transient liquid phase bonding of carbon steel components using Ni-based foils—a comprehensive joint characterization. Mater Sci Eng A 751:51–61. https://doi.org/10.1016/j.msea.2019.02.05010.1016/j.msea.2019.02.050 ↗
7. Garnish JD, Hughes JDH (1972) Quantitative analysis of boron in solids by autoradiography. J Mater Sci 7:7–13. https://doi.org/10.1007/BF0054954210.1007/BF00549542 ↗
8. Cameron TB, Morral JE (1986) The solubility of boron in iron. Metall Trans A 17:1481–1483. https://doi.org/10.1007/BF0265013210.1007/BF02650132 ↗
9. Taylor KA (1992) Grain-boundary segregation and precipitation of boron in 0.2 percent carbon steels. Metall Trans A 23:107–119. https://doi.org/10.1007/BF0266085810.1007/BF02660858 ↗
10. Karlsson L, Nordén H (1988) Overview no. 63 Non-equilibrium grain boundary segregation of boron in austenitic stainless steel—IV. Precipitation behaviour and distribution of elements at grain boundaries. Acta Metall 36:35–48. https://doi.org/10.1016/0001-6160(88)90026-010.1016/0001-6160(88)90026-0 ↗
11. Miyamoto G, Goto A, Takayama N, Furuhara T (2018) Three-dimensional atom probe analysis of boron segregation at austenite grain boundary in a low carbon steel—effects of boundary misorientation and quenching temperature. Scr Mater 154:168–171. https://doi.org/10.1016/j.scriptamat.2018.05.04610.1016/j.scriptamat.2018.05.046 ↗
12. Shigesato G, Fujishiro T, Hara T (2014) Grain boundary segregation behavior of boron in low-alloy steel. Metall Mater Trans A Phys Metall Mater Sci 45:1876–1882. https://doi.org/10.1007/s11661-013-2155-310.1007/s11661-013-2155-3 ↗
13. Li YJ, Ponge D, Choi P, Raabe D (2015) Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography. Scr Mater 96:13–16. https://doi.org/10.1016/j.scriptamat.2014.09.03110.1016/j.scriptamat.2014.09.031 ↗
14. Taylor KA, Hansen SS (1990) The boron hardenability effect in thermomechanically processed, direct-quenched 0.2 Pct C steels. Metall Trans A 21:1697–1708. https://doi.org/10.1007/BF0267258610.1007/BF02672586 ↗
15. Fedorova I, Liu F, Grumsen FB et al (2018) Fine (Cr, Fe) 2 B borides on grain boundaries in a 10Cr–0.01B martensitic steel. Scr Mater 156:124–128. https://doi.org/10.1016/j.scriptamat.2018.07.02110.1016/j.scriptamat.2018.07.021 ↗
16. Yasuda R, Matsubayashi M, Nakata M, Harada K (2002) Application of neutron radiography for estimating concentration and distribution of hydrogen in Zircaloy cladding tubes. J Nucl Mater 302:156–164. https://doi.org/10.1016/S0022-3115(02)00778-X10.1016/S0022-3115(02)00778-X ↗
17. Griesche A, Dabah E, Kannengiesser T et al (2014) Three-dimensional imaging of hydrogen blister in iron with neutron tomography. Acta Mater 78:14–22. https://doi.org/10.1016/j.actamat.2014.06.03410.1016/j.actamat.2014.06.034 ↗
18. Banhart J (2008) Radiation sources and interaction of radiation with matter. In: Banhart J (ed) Advanced tomographic methods in materials research and engineering. Oxford University Press, Oxford, pp 107–138. https://doi.org/10.1093/acprof:oso/9780199213245.003.000410.1093/acprof:oso/9780199213245.003.0004 ↗
19. Schulz M, Schillinger B, Calzada E et al (2015) The New Neutron Imaging Beam Line ANTARES at FRM II. Restaurierung und Archäologie 8:9–14. https://doi.org/10.11588/ra.2015.0.3701610.11588/ra.2015.0.37016 ↗
20. Schulz M, Schillinger B (2015) ANTARES: Cold neutron radiography and tomography facility. J Large-Scale Res Facil JLSRF 1:A17. https://doi.org/10.17815/jlsrf-1-4210.17815/jlsrf-1-42 ↗
21. Heller AK, Brenizer JS (2009) Neutron radiography. In: Bilheux HZ, McGreevy R, Anderson IS (eds) Neutron imaging and applications: a reference for the imaging community. Springer, Boston, pp 67–8010.1007/978-0-387-78693-3_5 ↗
22. Arce GR, Bacca J, Paredes JL (2005) 3.2—nonlinear filtering for image analysis and enhancement. In: Bovik AL (ed) Handbook of image and video processing, 2nd edn. Academic Press, Burlington, pp 109–13310.1016/B978-012119792-6/50071-1 ↗
23. Strobl M, Manke I, Kardjilov N et al (2009) Advances in neutron radiography and tomography. J Phys D Appl Phys 42:243001. https://doi.org/10.1088/0022-3727/42/24/24300110.1088/0022-3727/42/24/243001 ↗
24. Deslattes RD (1969) Estimates of X-ray attenuation coefficients for the elements and their compounds. Acta Crystallogr Sect A 25:89–93. https://doi.org/10.1107/S056773946900011810.1107/S0567739469000118 ↗
25. Griesche A, Zhang B, Solórzano E, Garcia-Moreno F (2010) Note: X-ray radiography for measuring chemical diffusion in metallic melts. Rev Sci Instrum 81:056104. https://doi.org/10.1063/1.342725610.1063/1.3427256 ↗
26. Jackson DF, Hawkes DJ (1981) X-ray attenuation coefficients of elements and mixtures. Phys Rep 70:169–233. https://doi.org/10.1016/0370-1573(81)90014-410.1016/0370-1573(81)90014-4 ↗
27. Carter RS, Palevsky H, Myers VW, Hughes DJ (1953) Thermal neutron absorption cross sections of boron and gold. Phys Rev 92:716–721. https://doi.org/10.1103/PhysRev.92.71610.1103/PhysRev.92.716 ↗
28. Busby PE, Warga ME, Wells C (1953) Diffusion and solubility of boron in iron and steel. JOM 5:1463–1468. https://doi.org/10.1007/BF0339763710.1007/BF03397637 ↗
29. Wang W, Zhang S, He X (1995) Diffusion of boron in alloys. Acta Metall Mater 43:1693–1699. https://doi.org/10.1016/0956-7151(94)00347-K10.1016/0956-7151(94)00347-K ↗
30. Kargl F, Engelhardt M, Yang F et al (2011) In situ studies of mass transport in liquid alloys by means of neutron radiography. J Phys Condens Matter 23:254201. https://doi.org/10.1088/0953-8984/23/25/25420110.1088/0953-8984/23/25/254201 ↗
31. BS EN ISO 683-2:2018 (2018) Heat-treatable steels, alloy steels and free-cutting steels. Alloy steels for quenching and tempering
32. Sinclair CW, Purdy GR, Morral JE (2000) Transient liquid-phase bonding in two-phase ternary systems. Metall Mater Trans A 31:1187–1192. https://doi.org/10.1007/s11661-000-0114-210.1007/s11661-000-0114-2 ↗
33. Di Luozzo N, Fontana M, Arcondo B (2007) Transient liquid phase bonding of steel using an Fe–B interlayer. J Mater Sci 42:4044–4050. https://doi.org/10.1007/s10853-006-0190-910.1007/s10853-006-0190-9 ↗
34. Butler BD, Cohen JB (1992) The location of interstitial carbon in austenite. J Phys I 2:1059–1065. https://doi.org/10.1051/jp1:199219510.1051/jp1:1992195 ↗
35. Ban-ya S, Elliott JF, Chipman J (1970) Thermodynamics of austenitic Fe–C alloys. Metall Mater Trans B 1:1313. https://doi.org/10.1007/BF0290024810.1007/BF02900248 ↗
36. Dianoux A-J, Lander G (2003) Neutron data booklet, 2nd edn. Old City Publishing, Philadelphia
37. Bergner D, Khaddour Y, Lörx S (1991) Diffusion of Si in bcc- and fcc-Fe. Defect Diffus Forum 66–69:1407–1412. https://doi.org/10.4028/www.scientific.net/DDF.66-69.140710.4028/www.scientific.net/DDF.66-69.1407 ↗