Compressive behavior of the SiC-NWs/MCF composites with a designed double-nest microstructure
Source abstract
Abstract
The microstructure is a key factor for the comprehensive performance of carbon foam, especially for mechanical property. SiC nanowires/melamine-based carbon foam composites with a designed controllable double-nest microstructure were fabricated, which was made of a kind of hairy structure consisting of carbon skeleton with SiC nanowires sprouting out from them. This composite was ultralight with a minimum density of 5.56 mg/cm3. It also exhibited a good mechanical property that the compressive strength was improved to 45.67–73.11 kPa for each different microstructure, which is over 3–4.8 times than that of the matrix. This straining process of this designed double-nest microstructure was further investigated, and three mechanical models were built based on the octahedral model for analyzing the compressive process of this composite. By calculating and simulating the proposed model C, we obtained an empirical equation, and it was successfully utilized to calculate the compressive stress of this double-nest microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Foaming and Composites · Advanced ceramic materials synthesis · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Min G, Zengmin S, Weidong C, Hui L (2007) Anisotropy of mesophase pitch-derived carbon foams. Carbon 45(1):141–14510.1016/j.carbon.2006.07.024 ↗
2. Zhang C, Wang C, Zhan L, Wang C, Wang Y, Ling L (2011) Synthesis of carbon foam covered with carbon nanofibers as catalyst support for gas phase catalytic reactions. Mater Lett 65(12):1889–189110.1016/j.matlet.2011.03.054 ↗
3. Li TQ, Wang CY, An BX, Wang H (2005) Preparation of graphitic carbon foam using size-restriction method under atmospheric pressure. Carbon 9(43):2030–203210.1016/j.carbon.2005.03.013 ↗
4. Hu H, Zhao Z, Wan W, Gogotsi Y, Qiu J (2013) Ultralight and highly compressible graphene aerogels. Adv Mater 25(15):2219–222310.1002/adma.201204530 ↗
5. Arunkumar MP, Pitchaimani J, Gangadharan KV, Lenin Babu MC (2016) Influence of nature of core on vibro acoustic behavior of sandwich aerospace structures. Aerosp Sci Technol 56:155–16710.1016/j.ast.2016.07.009 ↗
6. Letellier M, Macutkevic J, Bychanok D et al (2017) Modelling the physical properties of glasslike carbon foams. J Phys: Conf Ser 879:012014
7. Liu H, Li T, Wang X, Zhang W, Zhao T (2014) Preparation and characterization of carbon foams with high mechanical strength using modified coal tar pitches. J Anal Appl Pyrol 110(1):442–44710.1016/j.jaap.2014.10.015 ↗
8. Zhang H, Zhou Y, Li C et al (2015) Porous nitrogen doped carbon foam with excellent resilience for self-supported oxygen reduction catalyst. Carbon 95:388–39510.1016/j.carbon.2015.08.025 ↗
9. Zani A, Dellasega D, Russo V, Passsoni M (2013) Ultra-low density carbon foams produced by pulsed laser deposition. Carbon 56(5):358–36510.1016/j.carbon.2013.01.029 ↗
10. Li S, Guo Q, Song Y, Liu Z, Shi J, Liu L, Yan X (2007) Carbon foams with high compressive strength derived from mesophase pitch treated by toluene extraction. Carbon 45(14):2843–284510.1016/j.carbon.2007.09.035 ↗
11. Kino N, Ueno T, Suzuki Y, Makino H (2009) Investigation of non-acoustical parameters of compressed melamine foam materials. Appl Acoust 70(4):595–60410.1016/j.apacoust.2008.07.002 ↗
12. Yu S, Chen Z, Wang Y, Luo R, Pan Y (2017) A study of thermal insulation properties and microstructure of ultra-light 3D-carbon foam via direct carbonization of polymer foam. J Porous Mat 10:1–10
13. Wang Y, Chen Z, Yu S, Saeed MU, Xu T, Wang W, Pan Y (2017) A novel ultra-light reticulated SiC foam with hollow skeleton. J Eur Ceram Soc 37(1):53–5910.1016/j.jeurceramsoc.2016.07.028 ↗
14. Ye X, Chen Z, Ai S et al (2018) Effect of thickness of SiC films on compressive strength and thermal properties of SiC/MCF composites. Ceram Int 45(4):4674–467910.1016/j.ceramint.2018.11.158 ↗
15. Yu S, Chen Z, Tao H, Wang Y, Pan Y, Liao J (2017) Influence of CVI-SiC coating on properties of carbon foam. J Nanjing Univ Aeronaut Astronaut 49(6):865–871
16. Yu S, Chen Z, Wang Y, Luo R, Li B, Chen Z, Pan Y (2017) Preparation and thermal insulation analysis of SiCw-SiC foam with hollow skeletons via carbon foam template CVI method. Mater Charact 134:296–30110.1016/j.matchar.2017.11.014 ↗
17. Ghani M, Maya F, Cerdà V (2016) Automated solid-phase extraction of organic pollutants using melamine–formaldehyde polymer-derived carbon foams. RSC Adv 6(54):48558–4856510.1039/C6RA08230K ↗
18. He S, Chen W (2014) High performance supercapacitors based on three-dimensional ultralight flexible manganese oxide nanosheets/carbon foam composites. J Power Sources 262:391–40010.1016/j.jpowsour.2014.03.137 ↗
19. Liu Y, Chen Z, Zhang J, Ai S, Tang H (2019) Ultralight and thermal insulation carbon foam/SiO2 aerogel composites. J Porous Mat 7:1–8
20. Mei H, Han D, Xiao S, Ji T, Tang J, Cheng L (2016) Improvement of the electromagnetic shielding properties of C/SiC composites by electrophoretic deposition of carbon nanotube on carbon fibers. Carbon 109:149–15310.1016/j.carbon.2016.07.070 ↗
21. Dai W, Yu J, Wang Y, Song Y, Alam F, Nishimura K, Lin C, Jiang N (2015) Enhanced thermal conductivity for polyimide composites with a three-dimensional silicon carbide nanowire@graphene sheets filler. J Mater Chem A 3(9):4884–489110.1039/C4TA06417H ↗
22. Wang Y, Wang J, Jia P (2011) Performance of forced convection heat transfer in porous media based on Gibson–Ashby constitutive model. Heat Transf Eng 32(11–12):1093–109810.1080/01457632.2011.556508 ↗
23. Gong L, Kyriakides S, Triantafyllidis N (2005) On the stability of Kelvin cell foams under compressive loads. J Mech Phys Solids 53(4):771–79410.1016/j.jmps.2004.10.007 ↗
24. Liu P (2010) Analyses of buckling failure mode for porous materials under compressive strength. Acta Phys Sin-ch Ed 59(12):8801–880610.7498/aps.59.8801 ↗
25. Liu P (2000) The tensile strength of porous metals with high porosity. J Adv Mater-Covina 32(2):9–16
26. Civalek Ö, Demir Ç (2011) Bending analysis of microtubules using nonlocal Euler-Bernoulli beam theory. Appl Math Model 35(5):2053–206710.1016/j.apm.2010.11.004 ↗
27. Chen L, Ozisik R, Schadler LS (2010) The influence of carbon nanotube aspect ratio on the foam morphology of MWNT/PMMA nanocomposite foams. Polymer 51(11):2368–237510.1016/j.polymer.2010.03.042 ↗
28. Zeng C, Hossieny N, Zhang C, Wang B (2013) Morphology and tensile properties of PMMA carbon nanotubes nanocomposites and nanocomposites foams. Compos Sci Technol 82(15):29–3710.1016/j.compscitech.2013.03.024 ↗
29. Abderrazak H, Hmida ESBH (2011) Silicon carbide: synthesis and properties. In: Properties and applications of silicon carbide ceramics. Springer, p 37510.5772/15736 ↗
30. Zhang L, Yilmaz ED, Schjødt-Thomsen J, Rauhe JC, Pyrz R (2011) MWNT reinforced polyurethane foam: processing, characterization and modelling of mechanical properties. Compos Sci Technol 71(6):877–88410.1016/j.compscitech.2011.02.002 ↗