Assessing micro- and nanoscale adhesion via liquid metal-based contact angle measurements in vacuum
Source abstract
Abstract
Understanding wetting phenomena is of critical importance for various fields in theoretical and applied surface sciences as well as for the functionality of micro- and nanoelectromechanical systems. Contact angle measurement is one of the well-established methodologies for the wettability assessment of a surface. However, it faces major challenges when applied to micro- and nanoscale structures. Here, we exploit the superior properties of liquid metal alloys to contact angle measurement thus creating a methodology that allows for reliable examination of wetting phenomena on small-scale surface sections within the single-digit micrometer range and below. The technique applies electromigration to prepare oxide-free liquid metal droplets with diameters of less than ten micrometers in a vacuum environment, enabling a scanning electron microscope to be used for contact angle measurement. Static and dynamic contact angle measurements can be realized via the targeted manipulation of the droplets. The characterization of microscale surface sections with different nanoscale surface texture is demonstrated. Following this approach, unique characterization of wetting properties on the small scale becomes feasible. The methodology presented is therefore of significant importance for various emerging research fields such as micro- and nanorobotics as well as studies of few asperity contact mechanics on the micro- and nanoscale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Surface Modification and Superhydrophobicity · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Hay KM, Dragila MI, Liburdy J (2008) Theoretical model for the wetting of a rough surface. J Colloid Interface Sci 325(2):472–47710.1016/j.jcis.2008.06.004 ↗
2. Bieleman J (2000) Additives for Coatings. Wiley, Hoboken10.1002/9783527613304 ↗
3. Habenicht G (2008) Applied Adhesive bonding: a practical guide for flawless results. Wiley, Weinheim10.1002/9783527626458 ↗
4. Ulman A (1996) Wetting studies of molecularly engineered surfaces. Thin Solid Films 273(1–2):48–5310.1016/0040-6090(95)06994-1 ↗
5. Xiao X, Qian L (2000) Investigation of humidity-dependent capillary force. Langmuir 16(21):8153–815810.1021/la000770o ↗
6. Tambe NS, Bhushan B (2004) Scale dependence of micro/nano-friction and adhesion of MEMS/NEMS materials, coatings and lubricants. Nanotechnology 15(11):1561–157010.1088/0957-4484/15/11/033 ↗
7. Geratherm Medical AG (2004) Galinstan fluid—safety data sheet acc, to Guideline 93/112/EC. Accessed on 20 Oct 2016
8. Morley NB, Burris J, Cadwallader LC, Nornberg MD (2008) GaInSn usage in the research laboratory. Rev Sci Instrum 79(5):5610710.1063/1.2930813 ↗
9. Yang J-C, Qi T-Y, Ni M-J, Wang Z-H (2016) Flow patterns of GaInSn liquid on inclined stainless steel plate under a range of magnetic field. Fusion Eng Des 109–111:861–86510.1016/j.fusengdes.2016.01.061 ↗
10. von Kleist-Retzow FT, Haenssler OC, Fatikow S (2019) Manipulation of liquid metal inside an SEM by taking advantage of electromigration. J Microelectromech Syst 28(1):88–9410.1109/JMEMS.2018.2878320 ↗
11. Davis E, Ndao S (2018) On the wetting states of low melting point metal Galinstan® on silicon microstructured surfaces. Adv Eng Mater 20(3):170082910.1002/adem.201700829 ↗
12. Liu T, Sen P, Kim C-J (2012) Characterization of nontoxic liquid-metal alloy galinstan for applications in microdevices. J Microelectromech Syst 21(2):443–45010.1109/JMEMS.2011.2174421 ↗
13. Wang L, Liu J (2014) Liquid metal inks for flexible electronics and 3D printing: a review. In: Proceedings of the ASME international mechanical engineering congress and exposition10.1115/IMECE2014-37993 ↗
14. Çınar S, Tevis ID, Chen J, Thuo M (2016) Mechanical Fracturing of core-shell undercooled metal particles for heat-free soldering. Sci. Rep. 6:2186410.1038/srep21864 ↗
15. Khondoker MAH, Sameoto D (2016) Fabrication methods and applications of microstructured gallium based liquid metal alloys. Smart Mater Struct 25(9):9300110.1088/0964-1726/25/9/093001 ↗
16. Schrader ME (1968) Ultra-high vacuum techniques in the measurement of contact angles: methylene iodide on glass. J Colloid Interface Sci 27(4):743–75010.1016/0021-9797(68)90108-2 ↗
17. Schrader ME (1970) Ultrahigh-vacuum techniques in the measurement of contact angles. II. Water on gold. J Phys Chem 74(11):2313–231710.1021/j100705a013 ↗
18. Schrader ME (1975) Ultrahigh vacuum techniques in the measurement of contact angles. IV. Water on graphite (0001). J Phys Chem 79(23):2508–251510.1021/j100590a013 ↗
19. Forsberg P, Lepoutre P, Kuster TA, Caufield D (1994) Environmental scanning electron microscope examination of paper in high moisture environment: surface structural changes and electron beam damage. Scanning Microsc 8(1):31–34
20. Aronov D, Rosenman G, Barkay Z (2007) Wettability study of modified silicon dioxide surface using environmental scanning electron microscopy. J Appl Phys 101(8):8490110.1063/1.2721945 ↗
21. Zimmermann S, Tiemerding T, Fatikow S (2015) Automated robotic manipulation of individual colloidal particles using vision-based control. IEEE/ASME Trans Mechatron 20(5):2031–203810.1109/TMECH.2014.2361271 ↗
22. Nečas D, Klapetek P (2012) Gwyddion: an open-source software for SPM data analysis. Open Phys 10(1):9910.2478/s11534-011-0096-2 ↗
23. von Kleist-Retzow FT, Bartenwerfer M, Fatikow S (2019) Liquid metal-based manipulator for microscale handling inside SEM. In: 14th IEEE international conference on nano/micro engineered and molecular systems, pp 332–33510.1109/NEMS.2019.8915588 ↗
24. Ahsan A (ed) (2011) Two phase flow, phase change and numerical modeling. INTECH Open Access Publisher, Rijeka
25. Tadmor R (2004) Line energy and the relation between advancing, receding, and young contact angles. Langmuir 20(18):7659–766410.1021/la049410h ↗
26. Chibowski E, Terpilowski K (2008) Surface free energy of sulfur–revisited I. Yellow and orange samples solidified against glass surface. J Colloid Interface Sci 319(2):505–51310.1016/j.jcis.2007.10.059 ↗
27. Gennes P-GD, Brochard-Wyart F, Quere D (2004) Capillarity and wetting phenomena: drops, bubbles, pearls, waves: drops, bubbles, pearls, waves. Springer, New York
28. Doudrick K et al (2014) Different shades of oxide: from nanoscale wetting mechanisms to contact printing of gallium-based liquid metals. Langmuir 30(23):6867–687710.1021/la5012023 ↗
29. Li Z, Li J, Li X, Ni M-J (2017) Free surface flow and heat transfer characteristics of liquid metal Galinstan at low flow velocity. Exp Therm Fluid Sci 82:240–24810.1016/j.expthermflusci.2016.11.021 ↗
30. Chen X et al (2012) Evaporation of droplets on superhydrophobic surfaces: surface roughness and small droplet size effects. Phys Rev Lett 109(11):11610110.1103/PhysRevLett.109.116101 ↗
31. Chabala JM (1992) Oxide-growth kinetics and fractal-like patterning across liquid gallium surfaces (eng). Phys Rev B Condens Matter 46(18):11346–1135710.1103/PhysRevB.46.11346 ↗