Dry sliding wear mechanisms of Ce in aluminum bronze coatings
Source abstract
Abstract
A new type of cerium bronze coatings with aluminum as the main compound and over the solubility limit were successfully fabricated on a mild steel substrate by plasma spraying system. Scanning electron microscopy analysis showed that Ce refined the microstructure effectively, which resulted in an increase in average hardness. Ce stimulated the Fe element diffusion from the substrate to coating which resulted in the evolution of Fe-containing intermetallics from the FeAl (κ2 phase) to Fe3Al (κ1 phase). This study also shows that a small amount of Ce (0.1 wt%) added into the novel aluminum bronze coating can improve the abrasive wear resistance by refining the microstructure and increasing the hardness of the coating, where the excess Ce (0.6 wt%) addition will reduce the abrasive wear resistance of the coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Science · Aluminum Alloys Composites Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Guo X, Zhang G, Li W, Gao Y, Liao H, Coddet C (2009) Investigation of the microstructure and tribological behavior of cold-sprayed tin-bronze-based composite coatings. Appl Surf Sci 255:3822–382810.1016/j.apsusc.2008.10.041 ↗
2. Amokrane BM, Abdelhamid S, Youcef M, Abderrahim B, Nedjemeddine B, Ahmed M (2011) Microstructural and mechanical properties of Ni-base thermal spray coatings deposited by flame spraying. Metall Mater Trans B 42:932–93810.1007/s11663-011-9551-0 ↗
3. Ghorbani M, Mazaheri M, Afshar A (2005) Wear and friction characteristics of electrodeposited graphite–bronze composite coatings. Surf Coat Technol 190:32–3810.1016/j.surfcoat.2004.04.092 ↗
4. Sundquist HA, Matthews A, Teer DG (1980) Ion-plated aluminum bronze coatings for sheet metal forming dies. Thin Solid Films 73:309–31410.1016/0040-6090(80)90494-0 ↗
5. Li WS, Liu Y (2012) Effect of Ce on wear behavior of plasma spray welded novel aluminum bronze coatings. Adv Mater Res 418:831–834
6. Xu JL, Wang ZP, Chen C, La PQ (2004) Research into a new high-strength aluminum bronze alloy. Int J Mater Prod Technol 21:443–45310.1504/IJMPT.2004.005001 ↗
7. Wang Y, Kovacevic R, Liu J (1998) Mechanism of surface modification of CeO in laser remelted alloy spray coating. Wear 221:47–5310.1016/S0043-1648(98)00262-2 ↗
8. Cheng YL, Zheng CQ, Zhang Z, Cao FH, Li JF, Zhang JQ, Wang JM (2002) The preparation and properties of iron base self-fluxing alloy spray-welding coatings with different rare earths and chromium content. J Mater Sci 37:4589–4595. https://doi.org/10.1023/A:102064423134010.1023/A:1020644231340 ↗
9. Wang KL, Zhang QB, Sun ML, Wei XG, Zhu YM (2001) Rare earth element modification of laser-clad nickel-based alloy coatings. Appl Surf Sci 174:191–20010.1016/S0169-4332(01)00017-4 ↗
10. Han BL, Lu XC (2009) Effect of La2O3 on microstructure, mechanical and tribological properties of Ni-W coatings. Chin Sci Bull 54:4566–457010.1007/s11434-009-0603-7 ↗
11. Yi W, Zheng CQ, Fan P, Cheng SH, Li W, Ying GF (2000) Effect of the rare earth on oxidation resistance of iron base fluxing alloy spray-welding coating. J Alloys Compd 311(1):6510.1016/S0925-8388(00)00863-X ↗
12. Wang KL, Zhu YM, Zhang QB, Sun ML (1997) Effect of rare earth cerium on the microstructure and corrosion resistance of laser cladding nickel base alloy coatings. J Mater Process Technol 63(1–3):56310.1016/S0924-0136(96)02684-2 ↗
13. Zhang ZY, Wang ZP, Liang BN (2005) Effect of CeO2 on the microstructure and bond strength of Fe–Ni–Cu alloy. J Rare Earths 23(1):73
14. Zhao T, Cai X, Wang SX, Zheng SA (2000) Effect of CeO2 on the microstructure and corrosive wear behavior of laser-cladded Ni/WC coating. Thin Solid Films 379(1–2):128
15. Li WS, Wang ZP, Lu Y, Yong G, Xu J (2006) Preparation, mechanical properties and wear behaviors of novel aluminum bronze for dies. Trans Nonferrous Metal Soc 16:607–61210.1016/S1003-6326(06)60107-6 ↗
16. Li WS, Lu Y, Yuan KX, Yuan CG (2011) Effects of cerium on microstructure and bonding strength of Cu–14Al–4.5Fe bronze plasma sprayed coating. J Rare Earth 29:363–36910.1016/S1002-0721(10)60461-9 ↗
17. Li WS, Wang ZP, Lu Y, Jin YH, Yuan LH, Wang F (2006) Mechanical and tribological properties of a novel aluminum bronze material for drawing dies. Wear 261:155–16310.1016/j.wear.2005.09.032 ↗
18. Li WS, Wang SC, Ma C, Wang ZP (2012) An electron microscopy study of the effect of Ce on plasma sprayed bronze coatings. J Phys: Conf Ser 371:012085
19. Li Y, Ngai TL, Xia W (1996) Mechanical, friction and wear behaviors of a novel high-strength wear-resisting aluminum bronze. Wear 197:130–13610.1016/0043-1648(95)06890-2 ↗
20. Singh JB, Cai W, Bellon P (2007) Dry sliding of Cu–15 wt%Ni–8 wt%Sn bronze: wear behavior and microstructures. Wear 263:830–84110.1016/j.wear.2007.01.061 ↗
21. Zhao T, Cai X, Wang SX, Zheng SA (2000) Effect of CeO2 on microstructure and corrosive wear behavior of laser-cladded Ni/WC coating. Thin Solid Films 379:128–13210.1016/S0040-6090(00)01536-4 ↗
22. Mølgaard J (1976) A discussion of oxidation, oxide thickness and oxide transfer in wear. Wear 40:277–29110.1016/0043-1648(76)90120-4 ↗
23. Shi Z, Bloyce A, Sun Y, Bell T (1996) Influence of surface melting on dry rolling-sliding wear of aluminum bronze against steel. Wear 198:300–30610.1016/0043-1648(96)07205-5 ↗
24. Hirth JP, Rigney DA (1976) Crystal plasticity and the delamination theory of wear. Wear 39:133–14110.1016/0043-1648(76)90229-5 ↗
25. Kalin M (2004) Influence of flash temperatures on the tribological behavior in low-speed sliding: a review. Mater Sci Eng A 374:390–39710.1016/j.msea.2004.03.031 ↗