Analysis of microstructure formation in cast Zn alloys derived from computational thermodynamics of the Zn–Al–Cu–Mg system
Source abstract
Abstract
A self-consistent thermodynamic description of the Zn–Al–Cu–Mg quaternary alloy system is developed. The as-cast microstructures of key Zn–Al–Cu–Mg samples in the low-alloyed range are studied experimentally. These are interpreted by computational thermodynamic analysis applying both Scheil and equilibrium simulations. Contradictions concerning the variation of apparent fraction of primary (Zn) phase, the eutectic structure and visibly larger fractions of eutectoid structure with increasing Mg content can be resolved by these detailed calculations. Two series of dedicated experimental work found in this journal on as-cast microstructures of such quaternary Zn alloys in the high-alloyed range, including also thermal analysis data, were also analyzed. The viability of this computational thermodynamic approach is demonstrated by providing a detailed analysis going beyond the explanations and interpretations in the original publications. The coverage of a larger Zn alloy composition range suggests a predictive capability of this approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Kallien LH, Leis W (2011) Ageing of zinc alloys. Int Foundry Res 64:2–23
2. Yao C, Tay SL, Zhu T, Shang H, Gao W (2015) Effects of Mg content on microstructure and electrochemical properties of Zn–Al–Mg alloys. J Alloys Compd 645:131–136. https://doi.org/10.1016/j.jallcom.2015.05.01010.1016/j.jallcom.2015.05.010 ↗
3. Wu Z, Sandlöbes S, Wang Y, Gibson JSKL, Korte-Kerzel S (2018) Creep behaviour of eutectic Zn–Al–Cu–Mg alloys. Mater Sci Eng A 724:80–94. https://doi.org/10.1016/j.msea.2018.03.06810.1016/j.msea.2018.03.068 ↗
4. Wu Z, Sandlöbes S, Wu L, Hu W, Gottstein G, Korte-Kerzel S (2016) Mechanical behaviour of Zn–Al–Cu–Mg alloys: deformation mechanisms of as-cast microstructures. Mater Sci Eng A 651:675–687. https://doi.org/10.1016/j.msea.2015.11.02010.1016/j.msea.2015.11.020 ↗
5. Peng X, Li Y, Liang X, Guo Q, Xu G, Peng Y, Yin Z (2018) Precipitate behavior and mechanical properties of enhanced solution treated Al–Zn–Mg–Cu alloy during non-isothermal ageing. J Alloys Compd 735:964–974. https://doi.org/10.1016/j.jallcom.2017.11.17810.1016/j.jallcom.2017.11.178 ↗
6. Yu H, Wang M, Jia Y, Xiao Z, Chen C, Lei Q, Li Z, Chen W, Zhang H, Wang Y, Cai C (2014) High strength and large ductility in spray-deposited Al–Zn–Mg–Cu alloys. J Alloys Compd 601:120–125. https://doi.org/10.1016/j.jallcom.2014.02.12610.1016/j.jallcom.2014.02.126 ↗
7. Wang J, Liu R, Luo T, Yang Y (2013) A high strength and ductility Mg–Zn–Al–Cu–Mn magnesium alloy. Mater Des 47:746–749. https://doi.org/10.1016/j.matdes.2012.12.08010.1016/j.matdes.2012.12.080 ↗
8. Zhu S, Luo T, Zhang T, Li Y, Yang Y (2017) Effects of Cu addition on the microstructure and mechanical properties of as-cast and heat treated Mg–6Zn–4Al magnesium alloy. Mater Sci Eng A 689:203–211. https://doi.org/10.1016/j.msea.2017.02.06110.1016/j.msea.2017.02.061 ↗
9. Ansara I, Dinsdale AT, Rand MH (ed) (1998) COST 507: thermochemical database for light metal alloys. Volume 2: definition of thermodynamical and thermophysical properties to provide a database for the development of new light alloys. European Commission, Luxembourg. ISBN: 92-828-3902-8
10. Liang H (1998) Thermodynamic modeling and experimental investigation of the aluminum–copper–magnesium–zinc quaternary system. University of Wisconsin - Madison, Madison
11. Liang P, Lukas HL (1998) System Al–Mg–Zn. In: Ansara I, Dinsdale AT, Rand MH (eds) COST 507: thermochemical database for light metal alloys. Volume 2: definition of thermodynamical and thermophysical properties to provide a database for the development of new light alloys. European Commission, Luxembourg, pp 329–332
12. Liang P, Tarfa T, Robinson JA, Wagner S, Ochin P, Harmelin MG, Seifert HJ, Lukas HL, Aldinger F (1998) Experimental investigation and thermodynamic calculation of the Al–Mg–Zn system. Thermochim Acta 314:87–110. https://doi.org/10.1016/S0040-6031(97)00458-910.1016/S0040-6031(97)00458-9 ↗
13. Liang P, Lukas HL (1998) System Cu–Mg–Zn. In: Ansara I, Dinsdale AT, Rand MH (eds) COST 507: thermochemical database for light metal alloys. Volume 2: definition of thermodynamical and thermophysical properties to provide a database for the development of new light alloys. European Commission, Luxembourg, pp 363–367
14. Liang P, Seifert HJ, Lukas HL, Ghosh G, Effenberg G, Aldinger F (1998) Thermodynamic modelling of the Cu–Mg–Zn ternary system. Calphad 22:527–544. https://doi.org/10.1016/S0364-5916(99)00009-710.1016/S0364-5916(99)00009-7 ↗
15. Bühler T (1998) System Al–Cu–Mg. In: Ansara I, Dinsdale AT, Rand MH (eds) COST 507: thermochemical database for light metal alloys. Volume 2: definition of thermodynamical and thermophysical properties to provide a database for the development of new light alloys. European Commission, Luxembourg, pp 311–314
16. Buhler T, Fries S, Spencer P, Lukas H (1998) A thermodynamic assessment of the Al–Cu–Mg ternary system. J Phase Equilib 19:317–333. https://doi.org/10.1361/10549719877034205810.1361/105497198770342058 ↗
17. Liang H, Chang YA (1998) A thermodynamic description for the Al–Cu–Zn system. J Phase Equilib 19:25–37. https://doi.org/10.1361/10549719877034272410.1361/105497198770342724 ↗
18. Liang H, Chen SL, Chang YA (1997) A thermodynamic description of the Al–Mg–Zn system. Metall Mater Trans A 28:1725–1734. https://doi.org/10.1007/s11661-997-0104-810.1007/s11661-997-0104-8 ↗
19. Liang HY, Chang YA (1997) A thermodynamic description for the ternary Cu–Mg–Zn system. Z Metallkd 88:836–841
20. Chen SL, Zuo Y, Liang H, Chang YA (1997) A thermodynamic description for the ternary Al–Mg–Cu system. Metall Mater Trans A 28:435–446. https://doi.org/10.1007/s11661-997-0144-010.1007/s11661-997-0144-0 ↗
21. Liang S-M, Hsiao H-M, Schmid-Fetzer R (2015) Thermodynamic assessment of the Al–Cu–Zn system, part I: Cu–Zn binary system. Calphad 51:224–232. https://doi.org/10.1016/j.calphad.2015.09.01010.1016/j.calphad.2015.09.010 ↗
22. Liang S-M, Schmid-Fetzer R (2015) Thermodynamic assessment of the Al–Cu–Zn system, part II: Al–Cu binary system. Calphad 51:252–260. https://doi.org/10.1016/j.calphad.2015.10.00410.1016/j.calphad.2015.10.004 ↗
23. Liang S-M, Schmid-Fetzer R (2016) Thermodynamic assessment of the Al–Cu–Zn system, Part III: Al–Cu–Zn ternary system. Calphad 52:21–37. https://doi.org/10.1016/j.calphad.2015.11.00110.1016/j.calphad.2015.11.001 ↗
24. Murray JL (2002) Thermodynamic modeling of the Al–Cu–Mg–Zn system in the aluminum corner. In: Turchi PEA, Gonis A, Shull RD (eds) CALPHAD and alloy thermodynamics. Min. Met. Mater. Soc., Warrendale, pp 165–175
25. Dinsdale AT (1991) SGTE data for pure elements. Calphad 15:317–425. https://doi.org/10.1016/0364-5916(91)90030-N10.1016/0364-5916(91)90030-N ↗
26. Schmid-Fetzer R, Hallstedt B (2012) Is zinc HCP_ZN or HCP_A3? Calphad 37:34–36. https://doi.org/10.1016/j.calphad.2012.01.00610.1016/j.calphad.2012.01.006 ↗
27. Mey SA (1993) Re-evaluation of the Al–Zn System. Z Metallkd 84:451–455
28. Saunders N (1998) System Al–Cu. In: Ansara I, Dinsdale AT, Rand MH (eds) COST 507: thermochemical database for light metal alloys. Volume 2: Definition of thermodynamical and thermophysical properties to provide a database for the development of new light alloys. European Commission, Luxemburg, pp 28–33
29. Cao W, Chen SL, Zhang F, Wu K, Yang Y, Chang YA, Schmid-Fetzer R, Oates WA (2009) PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation. Calphad 33:328–342. https://doi.org/10.1016/j.calphad.2008.08.00410.1016/j.calphad.2008.08.004 ↗
30. Köster W (1948) The ternary system copper-zinc-magnesium. Z Metallkd 39:352–359 (German)
31. Yamada M, Matuki K (1972) A Study of the Zn-rich Corner of the Zn–Cu–Mg phase diagram. J Jpn Inst Met 36:278–285. https://doi.org/10.2320/jinstmet1952.36.3_278 (Japanese)10.2320/jinstmet1952.36.3_278 ↗
32. Scheil E (1942) Bemerkungen zur Schichtkristallbildung. Z Metallkd 34:70–72 (in German)
33. Schmid-Fetzer R (2014) Phase diagrams: the beginning of wisdom. J Phase Equilib Diffus 35:735–760. https://doi.org/10.1007/s11669-014-0343-510.1007/s11669-014-0343-5 ↗
34. Liang S-M, Schmid-Fetzer R (2014) Phosphorus in Al–Si cast alloys: thermodynamic prediction of the AlP and eutectic (Si) solidification sequence validated by microstructure and nucleation undercooling data. Acta Mater 72:41–56. https://doi.org/10.1016/j.actamat.2014.02.04210.1016/j.actamat.2014.02.042 ↗
35. da Costa EM, da Costa CE, Vecchia FD, Rick C, Scherer M, dos Santos CA, Dedavid BA (2009) Study of the influence of copper and magnesium additions on the microstructure formation of Zn–Al hypoeutectic alloys. J Alloys Compd 488:89–99. https://doi.org/10.1016/j.jallcom.2009.08.12510.1016/j.jallcom.2009.08.125 ↗
36. Jareño ED, Castro MJ, Maldonado SI, Hernández FA (2010) The effects of Cu and cooling rate on the fraction and distribution of epsilon phase in Zn–4Al–(3–5.6)Cu alloys. J Alloys Compd 490:524–530. https://doi.org/10.1016/j.jallcom.2009.10.07310.1016/j.jallcom.2009.10.073 ↗