journal article·2019-05Open access

Hot workability and microstructure evolution of Al–0.2Sc–0.04Zr alloy

Yong Xue, Shuaishuai Chen, Zhimin Zhang, Qiang Wang, Jiangpeng Yan

Journal of Materials Science· Volume 54· Issue 10

Abstract

Hot deformation behavior of Al–0.2Sc–0.04Zr (wt.%) aluminum alloy was investigated via conducting hot compression tests at temperatures of 440–600 °C and at strain rates, ranging from 0.001 to 5 s−1, at an interval of an order of magnitude. The characteristics of the true stress–strains acquired in the hot compression tests were investigated, and the influence of processing parameters on the microstructure of the deformed samples was observed by using optical microscope and electron back-scattered diffraction (EBSD). Two types of processing maps for Al–0.2Sc–0.04Zr alloy were developed using the Kumar–Prasad (K–P) and Murty–Rao (M–R) instability/stability criteria, respectively. The prediction results of two types of processing maps were examined. Based on the analysis of the M–R processing map and EBSD, a deformation mechanism map covering a wide range of temperature and strain rate was developed. The result shows that the flow stress had a rapid increase to the maximum stress, and subsequently, the flow stress decreases continually to be of steady-state type when the deformation continues on. The M–R criterion can more accurately predict the unstable region than the K–P criterion. The optimum temperature T and strain rate $$ \dot{\varepsilon } $$ combination conditions for Al–0.2Sc–0.04Zr alloy are T = 520–560 °C, $$ \dot{\varepsilon } $$ = 10−3 s−1 or $$ \dot{\varepsilon } $$ = 0.1–5 s−1. The microstructure evolution dominated by the predominant or complete dynamic recrystallization can be acquired by deformation at the combination conditions. However, it is dominated mainly by dynamic recovery at lower temperatures (T < 520 °C) and by dynamic recrystallization at higher temperatures (T > 520 °C). In addition, the microstructure of specimen deformed at 600 °C shows a growing and coarse trend. Moreover, the nano-dimension precipitate particles of Al3(Sc,Zr) are uniformly distributed throughout Al matrix. The efficiency parameter η value of Al–0.2Sc–0.04Zr alloy in processing maps is smaller in comparison with that in pure aluminum, and it could be attributed to these nano-dimension particles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Chao RZ, Guan XH, Guan RG, Tie D, Lian C, Wang X, Zhang J (2014) Effect of Zr and Sc on mechanical properties and electrical conductivities of Al wires. Trans Nonferrous Metals Soc China 24(10):3164–316910.1016/S1003-6326(14)63456-7 ↗
2. Li ZH, Cai B, Liu Q, Qian HL (2010) Ageing strengthening and electrical conductivity of Al–xSc–0.04Zr (x = 0, 0.1%, 0.2% and 0.4%). Spec Cast Nonferrous Alloys 30(5):476–480
3. Li J, Cai B, Zhou W (2011) Aging behavior and electric conductivity of a new heat resistant Al–0.2Sc–0.04Zr (0.01B) alloy. Spec Cast Nonferrous Alloys 31(11):1070–1073
4. Song M, He Y, Fang S (2011) Effects of Zr content on the yield strength of an Al–Sc alloy. J Mater Eng Perform 20(3):377–38110.1007/s11665-010-9693-2 ↗
5. Zhou WW, Cai B, Li WJ, Liu ZX, Yang S (2012) Heat-resistant Al–0.2Sc–0.04Zr electrical conductor. Mater Sci Eng A 552(34):353–35810.1016/j.msea.2012.05.051 ↗
6. Jia ZH, Røyset J, Solberg JK, Liu Q (2012) Formation of precipitates and recrystallization resistance in Al–Sc–Zr alloys. Trans Nonferrous Metals Soc China 22(8):1866–187110.1016/S1003-6326(11)61399-X ↗
7. Du G, Deng JW, Yan DS, Zhao MJ, Rong LJ (2009) Coarsening behavior of Al3(Sc, Zr) precipitates and its influence on recrystallization temperature of Al–Mg–Sc–Zr Alloy. J Mater Sci Technol 25(6):749–752
8. Cai B, Li W, Zhou W, Li J, Li Z (2014) High temperature creep behavior of Al–0.2Sc–0.04Zr alloy. Spec Cast Nonferrous Alloys 34(2):113–115
9. Babu KA, Mandal S, Kumar A, Athreya CN, de Boer B, Sarma VS (2016) Characterization of hot deformation behavior of alloy 617 through kinetic analysis, dynamic material modeling and microstructural studies. Mater Sci Eng A 664:177–18710.1016/j.msea.2016.04.004 ↗
10. Kotkunde N, Krishnamurthy HN, Singh SK, Jella G (2018) Experimental and numerical investigations on hot deformation behavior and processing maps for ASS 304 and ASS 316. High Temp Mater Process (Lond) 37:9–1010.1515/htmp-2015-0226 ↗
11. Çadırlı E, Tecer H, Şahin M, Yılmaz E, Kırındı T, Gündüz M (2015) Effect of heat treatments on the microhardness and tensile strength of Al–0.25wt.% Zr alloy. J Alloys Compd 632:229–23710.1016/j.jallcom.2015.01.193 ↗
12. Knipling KE, Karnesky RA, Lee CP, Dunand DC, Seidman DN (2010) Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging. Acta Mater 58(15):5184–519510.1016/j.actamat.2010.05.054 ↗
13. Murty SVSN, Rao BN (1998) On the development of instability criteria during hotworking with reference to IN 718. Mater Sci Eng A 254(1–2):76–8210.1016/S0921-5093(98)00764-3 ↗
14. Babu NS, Tiwari SB, Rao BN (2013) Modified instability condition for identification of unstable metal flow regions in processing maps of magnesium alloys. Mater Sci Technol 21(8):976–98410.1179/174328405X47519 ↗
15. Lin YC, Chen XM, Wen DX, Chen MS (2014) A physically-based constitutive model for a typical nickel-based superalloy. Comput Mater Sci 83(2):282–28910.1016/j.commatsci.2013.11.003 ↗
16. Lin YC, Chen MS, Zhong J (2008) Constitutive modeling for elevated temperature flow behavior of 42CrMo steel. Comput Mater Sci 42(3):470–47710.1016/j.commatsci.2007.08.011 ↗
17. Xie J, Zhu Y, Bian F, Liu C (2017) Dynamic recovery and recrystallization mechanisms during ultrasonic spot welding of Al–Cu–Mg alloy. Mater Charact 132:145–15510.1016/j.matchar.2017.06.018 ↗
18. Yang Q, Deng Z, Zhang Z, Liu Q, Jia ZH, Huang GJ (2016) Effects of strain rate on flow stress behavior and dynamic recrystallization mechanism of Al–Zn–Mg–Cu aluminum alloy during hot deformation. Mater Sci Eng A 662:204–21310.1016/j.msea.2016.03.027 ↗
19. Zhang T, Tao YR, Wang XY (2014) Constitutive behavior, microstructural evolution and processing map of extruded Al–1.1Mn–0.3Mg–0.25RE alloy during hot compression. Trans Nonferrous Metals Soc China 24(5):1337–134510.1016/S1003-6326(14)63197-6 ↗
20. Zhu RH, Liu Q, Li JF, Chen YL, Zhang XH, Zheng ZQ (2018) Flow curve correction and processing map of 2050 Al–Li alloy. Trans Nonferrous Metals Soc China 28(3):404–41410.1016/S1003-6326(18)64674-6 ↗
21. Lin YC, Luo SC, Jiang XY, Tang Y, Chen MS (2018) Hot deformation behavior of a Sr-modified Al–Si–Mg alloy: constitutive model and processing maps. Trans Nonferrous Metals Soc China 28(4):592–60310.1016/S1003-6326(18)64692-8 ↗
22. Fuller CB, Seidman DN, Dunand DC (2003) Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures. Acta Mater 51(16):4803–481410.1016/S1359-6454(03)00320-3 ↗
23. Nayan N, Murty SVSN, Chhangani S, Prakash A, Prasad MJNV, Samajdar I (2017) Effect of temperature and strain rate on hot deformation behavior and microstructure of Al–Cu–Li alloy. J Alloy Compd 723:548–55810.1016/j.jallcom.2017.06.165 ↗
24. Zhang JS, Xia YF, Quan GZ, Wang X, Zhou J (2018) Thermal and microstructural softening behaviors during dynamic recrystallization in 3Cr20Ni10W2 alloy. J Alloy Compd 743:464–47810.1016/j.jallcom.2018.01.399 ↗
25. Kozmel T, Vural M, Tin S (2016) EBSD characterization of shear band formation in aluminum armor alloys. J Mater Sci 51(16):7554–7570. https://doi.org/10.1007/s10853-016-0035-010.1007/s10853-016-0035-0 ↗
26. Yiadom SB, Khan AK, Bassim N (2014) Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact. Mater Sci Eng A 615:373–39410.1016/j.msea.2014.07.095 ↗
27. Kumar AKSK, Rao BN (1998) Ziegler’s criterion on the instability regions in processing maps. J Mater Sci Lett 17(14):1203–120510.1023/A:1006541710533 ↗
28. Prasad YVRK, Gegel HL, Doraivelu SM, Malas JC, Morgan JT, Lark KA, Barker DR (1984) Modeling of dynamic material behavior in hot deformation: forging of Ti-6242. Metall Trans A 15(10):1883–189210.1007/BF02664902 ↗
29. Humphreys FJ, Hatherly M (2004) Chapter 14 in recrystallization and related annealing phenomena, 2nd edn. Elsevier, London, pp 451–46710.1016/B978-008044164-1/50018-9 ↗
30. Hakamada M, Watazu A, Saito N, Iwasaki H (2008) Dynamic recrystallization behavior during compressive deformation in Mg–Al–Ca–RE alloy. J Mater Sci 43(6):2066–2068. https://doi.org/10.1007/s10853-008-2474-810.1007/s10853-008-2474-8 ↗
31. Wang WY, Pan QL, Sun YW, Wang XD, Li A, Song WB (2016) Study on hot compressive deformation behaviors and corresponding industrial extrusion of as-homogenized Al–7.82Zn–1.96Mg–2.35Cu–0.11Zr alloy. J Mater Sci 53(16):11728–11748. https://doi.org/10.1007/s10853-018-2388-z10.1007/s10853-018-2388-z ↗