journal article·2018-10Open access

Response of Ti microstructure in mechanical and laser forming processes

H. Fidder, V. Ocelík, A. Botes, J. T. M. De Hosson

Journal of Materials Science· Volume 53· Issue 20

Abstract

Microstructural deformation mechanisms present during three different forming processes in commercially pure Ti were analysed. Room temperature mechanical forming, laser beam forming and a combination of these two processes were applied to thick metal plates in order to achieve the same final shape. An electron backscatter diffraction technique was used to study the plate microstructure before and after applying the forming processes. Substantial differences among the main deformation mechanisms were clearly detected. In pure mechanical forming at room temperature, mechanical twinning predominates in both compression and tensile areas. A dislocation slip mechanism inside the compression and tensile area is characteristic of the pure laser forming process. Forming processes which subsequently combine the laser and mechanical approaches result in a combination of twinning and dislocation mechanisms. The Schmid factor at an individual grain level, the local temperature and the strain rate are factors that determine which deformation mechanism will prevail at the microscopic level. The final microstructures obtained after the different forming processes were applied are discussed from the point of view of their influence on the performance of the resulting formed product. The observations suggest that phase transformation in Ti is an additional microstructural factor that has to be considered during laser forming.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser and Thermal Forming Techniques · Tribology and Lubrication Engineering · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Namba Y (1987) Laser forming of metals and alloys. In: Proceedings of LAMP’87. Osaka, pp 601–606
2. Masubushi K, Luebke WH (1995) Phase II report laser forming of plates for ship construction. Massachusets Institute of technology, Cambridge
3. Lawrence J, Pou J (2010) Advances in laser materials processing: technology, research and applications. CRC Press, Boca Raton10.1533/9781845699819 ↗
4. Scully K (1987) Laser line heating. J Ship Prod 3:237–24610.5957/jsp.1987.3.4.237 ↗
5. Dahotre NB, Harimkar SP (2008) Laser fabrication and machining of materials. Springer, New York
6. Vollertsen F, Komel I, Kals R (1995) The laser bending of steel foils for microparts by the buckling mechanism—a model. Model Simul Mater Sci Eng 3:107–119. https://doi.org/10.1088/0965-0393/3/1/00910.1088/0965-0393/3/1/009 ↗
7. Arnet H, Vollertsen F (1995) Extending laser bending for the generation of convex shapes. Proc Inst Mech Eng Part B J Eng Manuf 209:433–442. https://doi.org/10.1243/PIME_PROC_1995_209_107_0210.1243/PIME_PROC_1995_209_107_02 ↗
8. Shen H, Vollertsen F (2009) Modelling of laser forming—an review. Comput Mater Sci 46:834–840. https://doi.org/10.1016/j.commatsci.2009.04.02210.1016/j.commatsci.2009.04.022 ↗
9. Geiger M, Vollertsen F (1993) The Mechanisms of laser forming. CIRP Ann 42:301–304. https://doi.org/10.1016/S0007-8506(07)62448-210.1016/S0007-8506(07)62448-2 ↗
10. Yau CL, Chan KC, Lee WB (1998) Laser bending of leadframe materials. J Mater Process Technol 82:117–121. https://doi.org/10.1016/S0924-0136(98)00012-010.1016/S0924-0136(98)00012-0 ↗
11. Hu Z, Kovacevic R, Labudovic M (2002) Experimental and numerical modeling of buckling instability of laser sheet forming. Int J Mach Tools Manuf 42:1427–1439. https://doi.org/10.1016/S0890-6955(02)00075-510.1016/S0890-6955(02)00075-5 ↗
12. Hsiao Y-C (1997) Finite element analysis of laser forming. Massachusetts Institute of Technology, Cambridge
13. Els-Botes A, Fidder H, Woudberg S, McGrath PJ (2014) Mechanical characterisation of the effect of various forming processes applied to commercially pure titanium. Mater Charact 96:206–212. https://doi.org/10.1016/j.matchar.2014.08.01210.1016/j.matchar.2014.08.012 ↗
14. Taylor B, Weidmann E (2016) Metallographic preparation of titanium. Struers Application Notes, Denmark
15. Donachie MJ (2000) Titanium: a technical guide, 2nd edn. ASM International, Materials Park10.31399/asm.tb.ttg2.9781627082693 ↗
16. Tomé CN, Beyerlein IJ, Wang J, McCabe RJ (2011) A multi-scale statistical study of twinning in magnesium. JOM 63:19–23. https://doi.org/10.1007/s11837-011-0038-x10.1007/s11837-011-0038-x ↗
17. Beyerlein IJ, McCabe RJ, Tomé CN (2011) Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: a multi-scale modeling study. J Mech Phys Solids 59:988–1003. https://doi.org/10.1016/j.jmps.2011.02.00710.1016/j.jmps.2011.02.007 ↗
18. Wang L, Yang Y, Eisenlohr P et al (2010) Twin nucleation by slip transfer across grain boundaries in commercial purity titanium. Metall Mater Trans A 41:421–430. https://doi.org/10.1007/s11661-009-0097-610.1007/s11661-009-0097-6 ↗
19. Proust G, Tomé CN, Kaschner GC (2007) Modeling texture, twinning and hardening evolution during deformation of hexagonal materials. Acta Mater 55:2137–2148. https://doi.org/10.1016/j.actamat.2006.11.01710.1016/j.actamat.2006.11.017 ↗
20. Yu Q, Wang J, Jiang Y et al (2014) Twin–twin interactions in magnesium. Acta Mater 77:28–42. https://doi.org/10.1016/j.actamat.2014.05.03010.1016/j.actamat.2014.05.030 ↗
21. Cahn RW (1953) Plastic deformation of alpha-uranium; twinning and slip. Acta Metall 1:49–5210.1016/0001-6160(53)90009-1 ↗
22. Xin Y, Wang M, Zeng Z et al (2012) Strengthening and toughening of magnesium alloy by 10–12 extension twins. Scr Mater 66:25–28. https://doi.org/10.1016/j.scriptamat.2011.09.03310.1016/j.scriptamat.2011.09.033 ↗
23. Fernández A, Jérusalem A, Gutiérrez-Urrutia I, Pérez-Prado MT (2013) Three-dimensional investigation of grain boundary–twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling. Acta Mater 61:7679–7692. https://doi.org/10.1016/j.actamat.2013.09.00510.1016/j.actamat.2013.09.005 ↗
24. Reed-Hill BE, Buchanan ER (1963) Zig-zag twins in zirconium. Acta Metall 11:73–75. https://doi.org/10.1016/0001-6160(63)90133-010.1016/0001-6160(63)90133-0 ↗
25. Jiang L, Jonas JJ, Luo AA et al (2007) Influence of 10–12 extension twinning on the flow behavior of AZ31 Mg alloy. Mater Sci Eng A 445–446:302–309. https://doi.org/10.1016/j.msea.2006.09.06910.1016/j.msea.2006.09.069 ↗
26. Oppedal AL, El Kadiri H, Tomé CN et al (2012) Effect of dislocation transmutation on modeling hardening mechanisms by twinning in magnesium. Int J Plast 30–31:41–61. https://doi.org/10.1016/j.ijplas.2011.09.00210.1016/j.ijplas.2011.09.002 ↗
27. Roberts E, Partridge PG (1966) The accommodation around $$ \{10\bar{1}2\} \,\, \langle {\bar{1}011} \rangle \, $$ { 10 1 ¯ 2 } ⟨ 1 ¯ 011 ⟩ twins in magnesium. Acta Metall 14:513–527. https://doi.org/10.1016/0001-6160(66)90319-110.1016/0001-6160(66)90319-1 ↗
28. Pratt PL (1953) Cleavage deformation in zinc and sodium chloride. Acta Metall 1:692–699. https://doi.org/10.1016/0001-6160(53)90027-310.1016/0001-6160(53)90027-3 ↗
29. El Kadiri H, Kapil J, Oppedal AL et al (2013) The effect of twin–twin interactions on the nucleation and propagation of $$ \{10\bar{1}2\} $$ { 10 1 ¯ 2 } twinning in magnesium. Acta Mater 61:3549–3563. https://doi.org/10.1016/j.actamat.2013.02.03010.1016/j.actamat.2013.02.030 ↗
30. Meyers MA, Vöhringer O, Lubarda VA (2001) The onset of twinning in metals: a constitutive description. Acta Mater 49:4025–4039. https://doi.org/10.1016/S1359-6454(01)00300-710.1016/S1359-6454(01)00300-7 ↗
31. Garde AM, Reed-Hill RE (1971) The importance of mechanical twinning in the stress-strain behavior of swaged high purity fine-grained titanium below 424 °K. Metall Trans 2:2885–2888. https://doi.org/10.1007/BF0281326710.1007/BF02813267 ↗
32. Yoo MH (1981) Slip, twinning, and fracture in hexagonal close-packed metals. Metall Trans A 12:409–418. https://doi.org/10.1007/BF0264853710.1007/BF02648537 ↗
33. Guan Y, Sun S, Zhao G, Luan Y (2005) Influence of material properties on the laser-forming process of sheet metals. J Mater Process Technol 167:124–131. https://doi.org/10.1016/j.jmatprotec.2004.10.00310.1016/j.jmatprotec.2004.10.003 ↗
34. Welsch G, Boyer R, Collings EW (1993) Materials properties handbook: titanium alloys. ASM International, Materials Park
35. Ashby MF, Easterling KE (1984) The transformation hardening of steel surfaces by laser beams—I. Hypo-eutectoid steels. Acta Metall 32:1935–1948. https://doi.org/10.1016/0001-6160(84)90175-510.1016/0001-6160(84)90175-5 ↗