Mechanochemical synthesis and effect of various additives on the hydrogen absorption–desorption behavior of Na3AlH6
Source abstract
Abstract
Sodium aluminum hydride has been extensively investigated for hydrogen storage applications whereas its intermediate decomposition compound Na 3 AlH 6 received much less attention, despite having a lower dissociation pressure and a reasonable hydrogen storage capacity of 3.0 wt%. In this work, Na 3 AlH 6 is synthesized through ball milling, starting from NaAlH 4 and 2 NaH in the presence of TiCl 3 catalyst precursor, and evaluated on its hydrogen sorption properties and cycle stability. Further addition of 8 mol% Al and 8 mol% activated carbon (AC) and their effect on both the hydrogen sorption properties and cycle stability have been investigated. In order to explore whether the introduction of the Al and AC additives would be more beneficial (in terms of hydrogen sorption behavior and cycle stability) after the Na 3 AlH 6 synthesis or during its synthesis, pre-synthesized Na 3 AlH 6 -based measurements were also included in this work. TiCl 3 -catalyzed NaAlH 4 + 2 NaH sample showed a stable reversible hydrogen storage capacity of 1.7 wt%, which was further increased to 2.1 wt% with the addition of Al-powder and activated carbon AC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen Storage and Materials · Ammonia Synthesis and Nitrogen Reduction · Hybrid Renewable Energy Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Jain IP, Jain P, Jain A (2010) Novel hydrogen storage materials: a review of lightweight complex hydrides. J Alloys Compd 503:303–33910.1016/j.jallcom.2010.04.250 ↗
2. Sakintuna B, Lamari-Darkrim F, Hirscher M (2007) Metal hydride materials for solid hydrogen storage: a review. Int J Hydrogen Energy 32:1121–114010.1016/j.ijhydene.2006.11.022 ↗
3. Bogdanović B, Schwickardi M (1997) Ti-doped alkali metal aluminium hydrides as potential novel reversible hydrogen storage materials. J Alloys Compd 253–254:1–910.1016/S0925-8388(96)03049-6 ↗
4. Zakharkin LI, Gavrilenko VV (1962) The direct synthesis of sodium and potassium aluminum hydrides from the elements. Dokl Akad Nauk SSSR 145:793–796
5. Ashby EC, Kobetz P (1966) The direct synthesis of Na3AlH6. Inorg Chem 5:1615–161710.1021/ic50043a034 ↗
6. Huot J, Boily S, Guther V, Schulz R (1999) Synthesis of Na3AlH6 and Na2LiAlH6 by mechanical alloying. J Alloys Compd 283:304–30610.1016/S0925-8388(98)00875-5 ↗
7. Wang P, Kang XD, Cheng HM (2005) Direct formation of Na3AlH6 by mechanical milling NaH/Al with TiF3. Appl Phys Lett 87:07191110.1063/1.2001756 ↗
8. Kircher O, Fichtner M (2005) Kinetic studies of the decomposition of NaAlH4 doped with a Ti-based catalyst. J Alloys Compd 404–406:339–34210.1016/j.jallcom.2004.11.121 ↗
9. Zidan RA, Takara S, Hee AG, Jensen CM (1999) Hydrogen cycling behavior of zirconium and titanium–zirconium-doped sodium aluminum hydride. J Alloys Compd 285:119–12210.1016/S0925-8388(99)00006-7 ↗
10. Mao J, Guo Z, Liu H (2012) Enhanced hydrogen storage properties of NaAlH4 co-catalysed with niobium fluoride and single-walled carbon nanotubes. RSC Adv 2:1569–157610.1039/C1RA00645B ↗
11. Adelhelm P, de Jongh PE (2011) The impact of carbon materials on the hydrogen storage properties of light metal hydrides. J Mater Chem 21:2417–242710.1039/C0JM02593C ↗
12. Léon A, Schild D, Fichtner M (2005) Chemical state of Ti in sodium alanate doped with TiCl3 using X-ray photoelectron spectroscopy. J Alloys Compd 404–406:766–77010.1016/j.jallcom.2004.11.129 ↗
13. Bogdanović B, Eberle U, Felderhoff M, Schüth F (2007) Complex aluminium hydrides. Scr Mater 56:813–81610.1016/j.scriptamat.2007.01.004 ↗
14. Singh S, Eijt SWH, Huot J, Kockelmann WA, Wagemaker M, Mulder FM (2007) The TiCl3 catalyst in NaAlH4 for hydrogen storage induces grain refinement and impacts on hydrogen vacancy formation. Acta Mater 55:5549–555710.1016/j.actamat.2007.06.028 ↗
15. Sandrock G, Gross K, Thomas G (2002) Effect of Ti-catalyst content on the reversible hydrogen storage properties of the sodium alanates. J Alloys Compd 339:299–30810.1016/S0925-8388(01)02014-X ↗
16. Bastide J-P, Bonnetot B, Létoffé J-M, Claudy P (1981) Polymorphisme de l’hexahydroaluminate trisodique Na3AlH6. Mater Res Bull 16:91–9610.1016/0025-5408(81)90183-5 ↗
17. Bogdanović B, Brand RA, Marjanović A, Schwickardi M, Tölle J (2000) Metal-doped sodium aluminium hydrides as potential new hydrogen storage materials. J Alloys Compd 302:36–5810.1016/S0925-8388(99)00663-5 ↗
18. Weidenthaler C, Pommerin A, Felderhoff M, Schmidt W, Bogdanović B, Schüth F (2005) Evidence for the existence of β-Na3AlH6: monitoring the phase transformation from α-Na3AlH6 by in situ methods. J Alloys Compd 398:228–23410.1016/j.jallcom.2005.02.021 ↗
19. Urbancyk R, Peinecke K, Felderhoff M, Hauschild K, Kersten W, Peil S, Bathen D (2014) Aluminium alloy based hydrogen storage tank operated with sodium aluminium hexahydride Na3AlH6. Int J Hydrogen Energy 39:17118–1712810.1016/j.ijhydene.2014.08.101 ↗