journal article·2018-06

Strength of ceramic–metal joints measured in planar impact experiments

S. Hayun, E. Ionash, S. Kalabukhov, N. Frage, E. Zaretsky

Journal of Materials Science· Volume 53· Issue 11
Publisher page

Abstract

SPS-processed alumina and reaction-bonded boron carbide ceramic composite (RBBC) were joined with Al10SiMg alloy by spark plasma sintering and tested in a series of planar impact experiments designed to measure dynamic tensile (spall) strength of the joints. The results of the impact testing, together with postmortem inspection of the fractured samples, confirmed the applicability of this approach for testing joint strength. The measurements show that in the case of an RBBC/metal joint, the dynamic tensile strength of the joint exceeds that of the ceramic part, and that fracture of the shock-loaded ceramic–metal pair occurred in the ceramic portion. The dynamic tensile strength of the interface between alumina and Al10SiMg alloy virtually coincides with that of the metal part, with the fracture occurring exactly at the interface. The coincidence may be explained based on the recently published results of atomistic calculations of the structure of an alumina–aluminum interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Howe JM (1993) Bonding, structure and properties of metal/ceramic interfaces. Mater Res Symp Proc 314:27–3710.1557/PROC-314-27 ↗
2. Lemus-Ruiz J, Aguilar-Reyes EA (2004) Mechanical properties of silicon nitride joints using a Ti-foil interlayer. Mater Lett 58(19):2340–234410.1016/j.matlet.2004.02.042 ↗
3. Centeno A, Rocha VG, Borrell A, Blanco C, Fernandez A (2012) Fabrication of C/SiC composites by combining liquid infiltration process and spark plasma sintering technique. Ceram Int 38:2171–217510.1016/j.ceramint.2011.10.060 ↗
4. Guillard F, Allemand A, Lulewicz J-D, Galy J (2007) Densification of SiC by SPS—effects of time, temperature and pressure. J Eur Ceram Soc 27:2725–272810.1016/j.jeurceramsoc.2006.10.005 ↗
5. Luo Y, Li S, Pan W, Li L (2004) Fabrication and mechanical evaluation of SiC–TiC nanocomposites by SPS. Mater Lett 58:150–15310.1016/S0167-577X(03)00434-8 ↗
6. Liu W, Naka M (2003) In situ joining of dissimilar nanocrystalline materials by spark plasma sintering. Scripta Mater 48:1225–123010.1016/S1359-6462(03)00074-5 ↗
7. Rizzo S, Grasso S, Salvo M, Casalegno V, Reece MJ, Ferraris M (2014) Joining of C/SiC composites by spark plasma sintering technique. J Eur Ceram Soc 34:903–91310.1016/j.jeurceramsoc.2013.10.028 ↗
8. Miriyev A, Barlam D, Shneck R, Stern A, Frage N (2014) Steel to titanium solid state joining displaying superior mechanical properties. J Mater Process Technol 214:2884–289010.1016/j.jmatprotec.2014.06.026 ↗
9. Miriyev A, Stern A, Tuval E, Kalabukhov S, Hooper Z, Frage N (2013) Titanium to steel joining by spark plasma sintering (SPS) technology. J Mater Process Technol 213:161–16610.1016/j.jmatprotec.2012.09.017 ↗
10. Baumung K, Kanel GI, Müller G, Singer J (2000) Measurement of the adhesive strength of 200 µm thick turbine blade coatings by a dynamic method, shock compression of condensed matter—I999. AIP 505:1207–1210. https://doi.org/10.1063/1.130367810.1063/1.1303678 ↗
11. Girlitsky I, Zaretsky E, Kalabukhov S, Dariel MP, Frage N (2014) Dynamic compressive and tensile strengths of spark plasma sintered alumina. J Appl Phys 115:243505. https://doi.org/10.1063/1.488543610.1063/1.4885436 ↗
12. Hayun S, Weizmann A, Dariel MP, Frage N (2009) The effect of particle size distribution on the microstructure and the mechanical properties of boron carbide-based reaction-bonded composites. Int J Appl Ceram Technol 6(4):492–50010.1111/j.1744-7402.2008.02290.x ↗
13. Barker LM, Hollenbach RE (1972) Laser interferometer for measuring high velocities of any reflecting surface. J Appl Phys 43:4669–477510.1063/1.1660986 ↗
14. Kanel GI (2010) Spall fracture: methodological aspects, mechanisms and governing factors. Int J Fract 163:173–191. https://doi.org/10.1007/s10704-009-9438-010.1007/s10704-009-9438-0 ↗
15. Chen X, Asay JR, Dwivedi SK, Field DP (2006) Spall behavior of aluminum with varying microstructures. J Appl Phys 99:02352810.1063/1.2165409 ↗
16. Barker LM, Hollenbach RE (1970) Shock-wave studies of PMMA, fused silica, and sapphire. J Appl Phys 41:4208–4226. https://doi.org/10.1063/1.165843910.1063/1.1658439 ↗
17. Kanel GI, Razorenov SV, Fortov VE (2004) Shock-wave phenomena and the properties of condensed matter. Springer, New York, p 3310.1007/978-1-4757-4282-4 ↗
18. Antoun T, Seaman L, Curran D, Kanel GI, Razorenov SV, Utkin AV (2002) Spall fracture. Springer, New-York, Berlin, Heidelberg, p 90, 99
19. Duvall GE, Graham RA (1977) Phase transitions under shock-wave loading. Rev Mod Phys 49(3):523–57710.1103/RevModPhys.49.523 ↗
20. Pilania G, Thijsse BJ, Hoagland RG, Lazić I, Valone SM, Liu X-Y (2014) Revisiting the Al/Al2O3 interface: coherent interfaces and misfit accommodation. Sci Rep 4:4485. https://doi.org/10.1038/srep0448510.1038/srep04485 ↗
21. Zaretsky E (1995) Dislocation multiplication behind the shock front. J Appl Phys 78:3740. https://doi.org/10.1063/1.35995410.1063/1.359954 ↗
22. Gallagher PCJ (1970) The influence of alloying, temperature, and related effects on the stacking fault energy. Metall Trans 1(9):2429–246110.1007/BF03038370 ↗