journal article·2012-08

High-temperature preparation and electrochemical properties of TiO2 anatase phase-mounted carbon aerogels

Qinghan Meng, Xingchao Li, Ling Liu, Bing Cao

Journal of Materials Science· Volume 47· Issue 16
Publisher page

Abstract

TiO2 anatase phase-mounted carbon aerogels (CAs) were synthesized via the sol–gel polymerization of a mixture of resorcinol, formaldehyde, and tetrabutyl orthotitanate, followed by gelation, supercritical drying, and carbonization in N2 atmosphere. Ethanol was selected as the solvent in the sol–gel polymerization process. The morphology and microstructural characteristics of the TiO2-mounted carbon aerogel sample were obtained using thermogravimetry, transmission electron microscopy, scanning electron microscopy, N2 adsorption–desorption, and X-ray diffraction methods. The total pore volume and average pore sizes increased with TiO2 addition. Titania phase in anatase form was found to be more homogeneously distributed in the CAs at 900 °C. The anatase–rutile transformation did not take place at carbonization temperatures from 500 to 1100 °C and cyclic voltammetry measurements showed that the TiO2-mounted CAs exhibit good reversibility and high specific capacity as electrode materials, and the anatase in the carbon structure were not involved in the redox reactions. Electrochemical impedance spectroscopy demonstrated that the CA electrode behaves as an excellent capacitor with low resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Aerogels and thermal insulation · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Fujishima A, Rao TN, Tryk DA (2000) J Photochem Photobiol C 1:110.1016/S1389-5567(00)00002-2 ↗
2. Hermann JM, Disdier J, Pichat P, Malato S, Blanco J (1998) Appl Catal B 17:1510.1016/S0926-3373(97)00098-2 ↗
3. Hoffmann MR, Martin ST, Choi W, Bahnemann DW (1995) Chem Rev 95:6910.1021/cr00033a004 ↗
4. Kamat PV (1993) Chem Rev 93:26710.1021/cr00017a013 ↗
5. Shchipunov Y, Postnova I (2009) Colloid Surf B 74:17210.1016/j.colsurfb.2009.07.023 ↗
6. Liu YZ, Yang SG, Hong J, Sun C (2007) J Hazard Mater 142:20810.1016/j.jhazmat.2006.08.020 ↗
7. Vincent P, Brioude A, Journet C, Rabaste S, Purcell ST, Brusq JL, Plenet JC (2002) J Non-Cryst Solids 311:13010.1016/S0022-3093(02)01371-6 ↗
8. Ryoo MW, Kim JH, Seo G (2003) J Colloid Interface Sci 264:41410.1016/S0021-9797(03)00375-8 ↗
9. Ryoo MW, Kim JH, Seo G (2003) Water Res 37:152710.1016/S0043-1354(02)00531-6 ↗
10. Tryba B, Morawski AW, Inagaki M (2003) Appl Catal B 46:20310.1016/S0926-3373(03)00214-5 ↗
11. Inagaki M, Hirose Y, Matsunaga T (2003) Carbon 41:261910.1016/S0008-6223(03)00340-3 ↗
12. Pekala RW (1989) J Mater Sci 24:3221. doi: 10.1007/BF0113904410.1007/BF01139044 ↗
13. Kim SJ, Hwang SW, Hyun SH (2005) J Mater Sci 40:725. doi: 10.1007/s10853-005-6313-x10.1007/s10853-005-6313-x ↗
14. Hwang SW, Hyun SH (2004) J Non-Cryst Solids 347:23810.1016/j.jnoncrysol.2004.07.075 ↗
15. Hebalkar N, Arabale G, Sainkar SR, Pradhan SD, Mulla IS, Vijayamohanan K, Ayyub P, Kulkarni SK (2005) J Mater Sci 40:3777. doi: 10.1007/s10853-005-331810.1007/s10853-005-3318-4 ↗
16. Mirzaeian M, Hall PJ (2009) J Mater Sci 44(10):2705. doi: 10.1007/s10853-009-3355-510.1007/s10853-009-3355-5 ↗
17. Moreno-Castilla C, Maldonado-Hódar FJ, Carrasco-Marin F (2002) Langmuir 18:229510.1021/la011595u ↗
18. Maldonado-Hódar FJ, Moreno-Castilla C, Rivera-Utrilla J (2000) Appl Catal A 203:15110.1016/S0926-860X(00)00480-4 ↗
19. Kruk M, Jaroniec M (2001) Chem Mater 13:316910.1021/cm0101069 ↗
20. Maldonado-Hódar FJ, Moreno-Castilla C, Rivera-Utrilla J, Hanzawa Y, Yamada Y (2000) Langmuir 16:436710.1021/la991080r ↗
21. Ōya A, Ōtani S (1979) Carbon 17:13110.1016/0008-6223(79)90020-4 ↗
22. Xie YB, Yuan CW (2003) Appl Catal B 46:25110.1016/S0926-3373(03)00211-X ↗