journal article·2014-02

Visualization of solute distributions in dendritic and spheroidized Al grains characterized by both color etching method and electron probe microanalysis

Li Gao, Yohei Harada, Shinji Kumai

Journal of Materials Science· Volume 49· Issue 3
Publisher page

Abstract

Spheroidization of Al grains was realized by compressing and partially remelting the as-received A356 aluminum alloy billets with a dendritic microstructure. A color etchant named Weck’s reagent was used to characterize the microstructures of both dendritic and spheroidal Al grains. After etching, color differences were observed inside Al grains. In the spheroidal grains, both the original dendritic structure and grain growth during water quenching were revealed by this reagent. By electron probe microanalyses, it was found that such color difference was strongly related to the microsegregation of Ti. Also, both microsegregations of Si and Ti were found in dendritic Al grains, as well as the grain growth of spheroidal Al grains during water quenching. Quantitative analyses indicated that after heating and partial remelting, the concentration of Ti was increased from dendritic grain to spheroidal grain. This phenomenon was discussed and considered to be related to Ostwald ripening and the increase of Ti solubility in Al as the temperature increased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Spencer DB, Mehrabian R, Flemings MC (1972) Metall Trans 3:192510.1007/BF02642580 ↗
2. Flemings MC (1991) Metall Trans A 22A:95710.1007/BF02661090 ↗
3. Kirkwood DH, Sellars CM, Elias-Boyed LG (1992) European Patent No. 030537 B1
4. Weck E, Leistner E (1986) Metallographic instructions for colour etching by immersion, part iII: non-ferrous metals, cemented carbides and ferrous metals, nickel-base and cobalt-base alloys. D. V. S. Verlag GmbH, Düsseldorf
5. Gao L, Harada Y, Kumai S (2012) J Mater Sci 47:6553. doi: 10.1007/s10853-012-6585-x10.1007/s10853-012-6585-x ↗
6. Suárez-Peña B, Asensio-Lozano J, Vander Voort GF (2010) Rev Metal (in Spanish) 46:46910.3989/revmetalm.1013 ↗
7. Setiukov OA, Fridlyander IN (1996) Mater Sci Forum 217–222:19510.4028/www.scientific.net/MSF.217-222.195 ↗
8. Kamio A, Tezuka H, Choi J-C, Takahashi T (1984) J Jpn Inst Light Metals (in Japanese) 35:13310.2464/jilm.35.133 ↗
9. Easton MA, St. John DH (2000) Mater Sci Technol 16:99310.1179/026708300101508946 ↗
10. Gröbner J, Mirković D, Schmid-Fetzer R (2005) Mater Sci Eng A 395:1010.1016/j.msea.2004.11.048 ↗
11. McCartney DG (1989) Int Mater Rev 34:24710.1179/imr.1989.34.1.247 ↗
12. Vander Voort GF (2004) ASM handbook: metallography and microstructures, vol 9. ASM Press, Washington DC, pp 493–51210.31399/asm.hb.v09.a0003752 ↗
13. Szabo PJ, Kardos I (2010) Mater Charact 61:81410.1016/j.matchar.2010.05.005 ↗
14. Fujikawa S, Hirano K, Fukushima Y (1978) Metall Trans A 9A:181110.1007/BF02663412 ↗
15. Fujikawa S, Hirano K (1977) Mater Sci Eng 27:2510.1016/0025-5416(77)90190-2 ↗
16. Alexander WB, Slifkin LM (1970) Phys Rev B 1:327410.1103/PhysRevB.1.3274 ↗
17. Bergner D (1984) Neue Hutte 29:207
18. St. John DH, Hogan LM (1980) J Mater Sci 15:2369. doi: 10.1007/BF0055233010.1007/BF00552330 ↗