Service life assessment and moisture influence on bio-based composites
Source abstract
Abstract
A race towards a more sustainable society is going on worldwide, and decreasing dependence on fossil resources in energy and transport sectors are main goals. One path to decreased oil usage is development of lightweight materials from renewable resources like bio-based composites. However, these new bio-based materials not only have to compete in mechanical performance but also have to restrain environmental loads like moisture and temperature over time. In this study, two bio-based composites have been compared to an oil-based composite in terms of long-term properties and water absorption behaviour. The long-term behaviour is determined by dynamic mechanical thermal analysis, DMTA and time temperature superposition, TTSP. The water uptake is determined by submersion of specimens into water and tracking their weight change over time. The moisture influence is characterised in form of water uptake and change in the master curves created by TTSP procedure. The results show that there is a significant difference in long-term performance between the bio-based and oil-based composites. It is realised that the bio-based composites can be a good alternative for some applications especially when taking their eco-friendly nature into account.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. White paper 2011 (2011) Roadmap to a single European transport area—towards a competitive and resource efficient transport system. Brussels, 28.3.2011, COM 144 final
2. Energy Roadmap 2050 (2011) Brussels, 15.12.2011, COM 885 final
3. Oksman K (2000) Liquid composite moulding of natural fibres. In: Follini E, Leao AL, Mattoso LHC (eds) Natural Agrofibers based composites. Embrapa Instrumentacao Agropecuaria, Sao Carlos, pp 203–227
4. Goutianos S, Peijs T, Skrifvars M, Eng T (2003) Textile reinforcements based on flax fibres for structural composites. Part 1—the optimisation of flax fibre yarns for high-performance natural fibre composites. Poster presentation at the 2nd international conference on eco-composites London, p 3.04
5. Rodríguez E, Petrucci R, Puglia D, Kenny JM, Vázquez A (2005) Characterization of composites based on natural and glass fibers obtained by vacuum infusion. J Comp Mat 39:265–28210.1177/0021998305046450 ↗
6. Goutianos S, Peijs T, Nystrom B, Skrifvars M (2006) Development of Flax Fibre based Textile Reinforcements for Composite Applications. Appl Comp Mat 13:199–21510.1007/s10443-006-9010-2 ↗
7. Åkesson D, Skrifvars M, Lv S, Shi W, Adekunle K, Seppälä J, Turunen M (2006) Preparation of nanocomposites from biobased thermoset resins by UV-curing. Prog Org Coat 67:281–28610.1016/j.porgcoat.2009.11.002 ↗
8. Sparnins E, Nyström B, Andersons J (2012) Interfacial shear strength of flax fibers evaluated via tensile tests of composites. Int J Adhes Adhes 36:39–4310.1016/j.ijadhadh.2012.03.006 ↗
9. Kim JR, Sharma S (2012) The development and comparison of bio-thermoset plastics from epoxidized plant oils. Ind Crop Prod 36:485–49910.1016/j.indcrop.2011.10.036 ↗
10. Nyström B (2008) Tillverkning av bio-baserade kompositer – möjligheter och begränsningar. Biokompositseminarium, Quality Hotel 11, Göteborg, 23 April
11. Nyström B, Joffe R (2010) Mechanical performance and damage tolerance of bio-based polymer composites with manmade cellulose fibre reinforcement. SICOMP Conference June 2010, Piteå
12. Joffe R, Nyström B (2010) Suitability of manmade cellulose fibers as reinforcement for bio-based polymer composites. SICOMP Conference June 2010, Piteå
13. Rozite L, Joffe R, Nyström B (2011) Damage accumulation and degradation of mechanical properties in polymer composites reinforced with highly non-linear cellulosic fibers. The 11th international conference on wood and biofiber plastic composites, Madison, WI, May 16–17
14. Nyström B, Joffe R, Rosite L (2011) Development of bio-based advanced composites with transport structures in mind. 22nd SICOMP conference, Gothenburg
15. Apicella A, Migliaresi C, Nicolais L, Iaccarina L, Roccotelli S (1983) The water ageing of unsaturated polyester-based composites: influence of resin chemical structure. Composites 14:387–39210.1016/0010-4361(83)90160-X ↗
16. Apicella A (1990) Environmental Resistance of High-performance polymeric matrices and composites. In: Lee SM (ed) International encyclopedia of composites. Wiley, New York, pp 46–67
17. Gentry R, Bank LC, Barkatt A, Prian L (1998) Accelerated Test Methods to determine the long-term behaviour of composite highway structures subject to environmental loadling. Am Soc Test Mat 20:38–50
18. Shah CS, Patni MJ, Pandya MV (1994) Accelerated ageing an life time prediction analysis of polymer composites: a new approach for realistic prediction using cumulative damage theory. Poly Test 13:295–32210.1016/0142-9418(94)90003-5 ↗
19. Bank LC, Gentry TR, Barkatt A (1995) Accelerated test methods to determine the long-term behaviour of FRP composite structures: environmental effects. J Reinf Plast Comp 14:559–58710.1177/073168449501400602 ↗
20. Christensen RM (1982) Theory of viscoelasticity, an introduction, 2nd edn. Academic Press, New York
21. Ward IM, Hadley DW (1993) An Introduction to the mechanical properties of solid polymers, 1st edn. Wiley, New York
22. Mannberg P, Nyström B, Joffe R (2014) Service life assessment and moisture influence on bio-based thermosetting resins. J Mater Sci 49:3687–369310.1007/s10853-014-8078-6 ↗