journal article·2005-07

Concentration fluctuations and surface tension in liquid Au-Sn-Zn

P. Terzieff

Journal of Materials Science· Volume 40· Issue 14
Publisher page

Abstract

Experimental thermodynamic data were applied to calculate the surface tension and the long-wavelength limit of the concentration-concentration fluctuations Scc(0) in the ternary system Au-Sn-Zn. The fluctuations in the concentration of Zn and in particular those of Sn show marked maxima around Au15Sn30Zn55 whereas for Au the fluctuations are smaller than those of a non-interacting ideal mixture. Over an extremely wide range of compositions the surface layer of the ternary is found to be primarily populated by Sn atoms. Excepting the alloys with larger amounts of Au (c Au > 0.3) or high contents of Zn (c Zn > 0.7) the surface tension is not very different from that of pure by Sn (0.52-0.60 Nm-1). The progressive substitution of Sn by Zn at a constant value of c Au≈ 0.3 leaves the surface tension practically constant up to c Zn≈ 0.5. In sections of constant c Au/c Sn with c Au/c Sn > 0.3 the surface tension is observed to even pass through pronounced minima if larger amounts of Zn are added. © 2005 Springer Science + Business Media, Inc.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Thermodynamic and Structural Properties of Metals and Alloys · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. ABTEW and G. SELVADURAY, Mater. Sci. Eng. 27 (2000) 97.10.1016/S0927-796X(00)00010-3 ↗
2. S. VAYNMAN and M. E. FINE, Scr. Mater. 41 (1999) 1269.10.1016/S1359-6462(99)00302-4 ↗
3. M. MACCORMACK and S. JIN, J. Electron Mat. 23 (1994) 635.10.1007/BF02653349 ↗
4. K. SAGANUMA, K. NIIHARA, T. SHOUTOKU and Y. NAKAMURA, J. Mater. Res. 13 (1998) 2859.10.1557/JMR.1998.0391 ↗
5. C. MELTON, JOM 45 (1993) 33.10.1007/BF03222378 ↗
6. W. J. TOMLINSON and A. FULLYLOVE, J. Mater. Sci. 27 (1992) 5777.10.1007/BF01119737 ↗
7. M. MCCORMACK and S. JIN, J. Electron, Mater. 23 (1994) 715.10.1007/BF02651364 ↗
8. T. C. CHANG, M. C. WANG and M. H. HON, J. Cryst. Growth 250 (2003) 236.10.1016/S0022-0248(02)02252-2 ↗
9. T. TAKEMOTO and T. FUNAKI, Mater. Trans. 43 (2003) 1784.10.2320/matertrans.43.1784 ↗
10. K. KAMEDA, Trans. Japan Inst. Met. 28 (1987) 41.10.2320/matertrans1960.28.41 ↗
11. M. PENG and A. MIKULA, J. Alloys Comp. 247 (1997) 185.10.1016/S0925-8388(96)02575-3 ↗
12. S. KARLHUBER, K. L. KOMAREK and A. MIKULA, Z. Metallk. 85 (1994) 307.
13. S. KARLHUBER, A. MIKULA and F. SOMMER, Metall. Mat. Trans. B27 (1966) 921.
14. J. A. V. BUTLER, Proc. Roy. Soc. A135 (1935) 348.
15. E. HAYER, K. L. KOMAREK, J. P. BROS and M. GAUNE-ESCARD, Z. Metallk. 72 (1981) 109.
16. E. HAYER, Z. Phys. Chem. 156 (1988) 611.10.1524/zpch.1988.156.Part_2.611 ↗
17. E. SCHEIL and D. MÜLLER, Z. Metallk. 53 (1962) 389.
18. A. B. BHATIA and V. K. RATTI, Phys. Chem. Liq. 6 (1977) 201.10.1080/00319107708084140 ↗
19. H. K. LEE, J. P. HAJRA and M. G. FROHBERG, Z. Metallk. 83 (1992) 638.
20. T. TANAKA and T. IIDA, Steel Research 65 (1994) 29.10.1002/srin.199400921 ↗
21. T. D. TURKDOGAN, “Physical Chemistry of High Temperature Technology,” (Academic Press, New York 1980).
22. T. P. HOAR and D. A. MELFORD, Trans. Faraday Soc. 53 (1957) 315.10.1039/tf9575300315 ↗
23. A. F. CRAWLEY, Int. Met. Rev. 19 (1974) 32.10.1179/095066074790137015 ↗
24. T. IIDA and R. I. L. GUTHRIE, “The Physical Properties of Liquid Metals” (Claredon Press, Oxford 1988).
25. S. M. KAUFMAN and T. J. WHALEN, Acta Met. 13 (1965) 797.10.1016/0001-6160(65)90144-6 ↗
26. E. Pelzl and BERG HÜTTENMÅNN, Monatsh. 4 (1949) 10.
27. M. KUCHARSKI, Metalurgia i Odlewnictwo (1977) 329.
28. A. B. BHATIA and N. H. MARCH, J. Chem. Phys. 68 (1978) 4651.10.1063/1.435573 ↗
29. T. B. MASSALSKI, “Binary Alloy Phase Diagrams” (American Society of Metals, Metals Park, OH, 1986).