Spark plasma sintering of ductile ceramic particles: study of LiF
Source abstract
Abstract
Densification of cuboidal micrometer-sized lithium fluoride particles as ductile ceramic by spark plasma sintering (SPS) was investigated. Specimens were fabricated at different pressures and temperature conditions, ranging from 2 to 100 MPa at 500 °C and from 200 to 700 °C under 100 MPa of applied pressure, respectively. Dense specimens of 99 % relative density were fabricated by heating to 500 °C under constant pressure of 100 MPa. The densification showed first compaction by particle rearrangement, followed by plastic deformation via dislocation glide. Hot-pressing models were used to describe the densification by considering the temperature dependences of the yield stress, the strain hardening behavior and coefficients, and the pore size and shape dependences on the applied stress. A good agreement was found between the experimental and the theoretical densification curves. At low pressure of 2 MPa, the densification occurs by particle sliding, assisted by viscous flow at their surfaces, and local plastic deformation at the particle contacts, due to the intensified local stress. Finally, the micrometer-sized structural features and the contiguity achieved by plastic deformation at the start of spark plasma sintering (SPS) nullify any field effects in this model system at higher pressures; good agreement was obtained with expected conventional hot pressing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced Sensor and Energy Harvesting Materials · Antenna Design and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Garay JE, Glade SC, Anselmi-Tamburini U, Asoka-Kumar P, Munir ZA (2004) Appl Phys Lett 85:57310.1063/1.1774268 ↗
2. Olevsky EA, Froyen L (2009) J Am Ceram Soc 92:S12210.1111/j.1551-2916.2008.02705.x ↗
3. Chaim R (2013) J Mater Sci 48:502. doi: 10.1007/s10853-012-6764-910.1007/s10853-012-6764-9 ↗
4. Holland TR, Anselmi-Tamburini U, Quach DV, Tran TB, Mukherjee AK (2012) J Eur Ceram Soc 32:365910.1016/j.jeurceramsoc.2012.03.012 ↗
5. Chaim R, Marder R, Estournés C, Shen Z (2012) Adv Appl Ceram 111:28010.1179/1743676111Y.0000000074 ↗
6. Conrad H (2002) Mat Sci Eng A322:10010.1016/S0921-5093(01)01122-4 ↗
7. Gilman JJ, Johnston WG (1960) J Appl Phys 31:68710.1063/1.1735668 ↗
8. Johnston WG (1961) J Appl Phys 33:205010.1063/1.1728892 ↗
9. Fotedar HL, Stoebe TG (1968) Scripta Metall 2:44310.1016/0036-9748(68)90191-9 ↗
10. Verrall RA, Fields RJ, Ashby MF (1977) J Am Ceram Soc 60:21110.1111/j.1151-2916.1977.tb14108.x ↗
11. Marder R, Chaim R, Chevallier G, Estournes C (2011) J Eur Ceram Soc 31:105710.1016/j.jeurceramsoc.2010.12.032 ↗
12. Reed JS (1995) Principles of ceramics processing. Wiley, New York
13. Cropper DR, Langdon TG (1968) Phil Mag 18:118110.1080/14786436808227749 ↗
14. German RM (1989) Particle packing characteristics. Metal Powder Industries Federation, Princetown
15. Budworth DW, Pask JJ (1963) J Am Ceram Soc 46:56010.1111/j.1151-2916.1963.tb14612.x ↗
16. Gilman JJ (2003) Electronic Basis of the Strength of Materials. University Press, Cambridge
17. Skvortsova NP (1996) Cryst Res Technol 31:37310.1002/crat.2170310317 ↗
18. Gilman JJ (1959) Aust J Phys 13:32710.1071/PH600327a ↗
19. Scott WD, Pask JA (1963) J Am Ceram Soc 46:28410.1111/j.1151-2916.1963.tb11728.x ↗
20. Arzt E, Ashby MF, Easterling KE (1983) Metall Trans A 14A:21110.1007/BF02651618 ↗
21. Green DJ (1998) An Introduction to the mechanical properties of ceramics. University Press, Cambridge10.1017/CBO9780511623103 ↗
22. Helle AS, Easterling KE, Ashby MF (1985) Acta Metall 33:216310.1016/0001-6160(85)90177-4 ↗
23. Hoover DB, Washburn J (1962) J Appl Phys 33:1110.1063/1.1728468 ↗
24. Straffelini G (2005) Powder Metall 48:18910.1179/003258905X37594 ↗
25. Fotedar HL, Stoebe TG (1975) Phys Status Solidi A 31:39910.1002/pssa.2210310207 ↗
26. Shand EB (1968) In: Hausner HH, Gonser BW (eds) Modern Materials: V.6: Advances in Development and Applications Academic Press. New York, pp, p 247
27. Stoebe TG, Huggins RA (1966) J Mater Sci 1:117. doi: 10.1007/BF0055010010.1007/BF00550100 ↗
28. Bullard JW, Searcy AW (1997) J Am Ceram Soc 80:239510.1111/j.1151-2916.1997.tb03131.x ↗
29. Gilman JJ (1960) J Appl Phys 31:220810.1063/1.1735524 ↗
30. Ives MB, Plewes JT (1965) J Chem Phys 42:29310.1063/1.1695691 ↗
31. Matzke HJ (1971) J Phys Chem Solids 32:43710.1016/0022-3697(71)90027-8 ↗