journal article·2014-10

Grain boundary misorientation and positron annihilation characteristics in steel Eurofer processed by equal channel angular pressing

M. Eddahbi, R. Domínguez-Reyes, M. A. Monge, A. Muñoz, R. Pareja

Journal of Materials Science· Volume 49· Issue 19
Publisher page

Abstract

Electron back-scattered diffraction and positron annihilation lifetime measurements were performed on the ferritic–martensitic 9 %Cr Eurofer steel processed by equal channel angular pressing (ECAP) at 550 °C. The orientation imaging mapping images reveal ECAP-induced changes toward a more stable texture via rotation around 〈111〉 and 〈110〉 axes. These are accompanied by transformation of martensite into ferrite and a remarkable change in the bimodal distribution of grain misorientations with reduction of the fraction of high-angle grain boundaries. The positron annihilation measurements evidence the release of vacancies retained in the ECAP-processed material and their clustering into nanovoids in samples heat treated at T ≥ 500 °C. It is found that tensile strain applied at 600 °C can inhibit this void formation in the ECAP-deformed material for 1 and 2 passes, but not in the case of 4 passes. A model for accounting the results is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Fusion materials and technologies · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Eiselt CH, Klimenkov M, Lindau R, Möslang A, Odette GR, Yamamoto T, Gragg D (2011) Tensile and fracture toughness properties of the nanostructured oxide dispersion strengthened ferritic alloy 13Cr-1 W-0.3Ti-0.3Y2O3. J Nucl Mater 417:193–19610.1016/j.jnucmat.2010.12.066 ↗
2. Tavassoli AAF, Alamo A, Bedel L, Forest L, Gentzbittel JM, Rensma JW, Diegele E, Lindau R et al (2004) Materials design data for reduced activation martensitic steel type Eurofer. J Nucl Mater 329–333:257–26210.1016/j.jnucmat.2004.04.020 ↗
3. Hoffelner W (2010) Damage assessment in structural metallic materials for advanced nuclear plants. J Mater Sci 45:2247–2257. doi: 10.1007/s10853-010-4236-710.1007/s10853-010-4236-7 ↗
4. Salavy JF, Aiello G, Aubert P, Boccaccini LV, Daichendt M, de Dinechin G et al (2009) Ferritic-Martensitic steel test blanket modules: status and future needs for design criteria requirements and fabrication validation. J Nucl Mater 386–388:922–92610.1016/j.jnucmat.2008.12.239 ↗
5. Phaniraj MP, Kim D, Cho YW (2011) Effect of grain boundary characteristics on the oxidation behavior of ferritic stainless steel. Corr Sci 53:4124–413010.1016/j.corsci.2011.08.020 ↗
6. Jones R, Randle V (2010) Sensitisation behavior of grain boundary engineered austenitic stainless steel. Mater Sci Eng A 527:4275–428010.1016/j.msea.2010.03.058 ↗
7. Chiba A, Hanada S, Watanabe S, Abe T, Obana T (1994) Relation between ductility and grain boundary character distributions in Ni3Al. Acta Metall 42:1733–173810.1016/0956-7151(94)90383-2 ↗
8. Qian M, Lippold JC (2003) The effect of annealing twin-generated special grain boundaries on HAZ liquation cracking of nickel-base superalloys. Acta Mater 51:3351–336110.1016/S1359-6454(03)00090-9 ↗
9. Sakaguchi N, Endo M, Watanabe S, Kinoshita H, Yamashita S, Kokawa H (2013) Radiation-induced segregation and corrosion behavior on Σ3 coincidence site lattice and random grain boundaries in proton-irradiated type-316L austenitic stainless steel. J Nucl Mater 434:65–7110.1016/j.jnucmat.2012.11.036 ↗
10. Field KG, Barnard LM, Parish CM, Busby JT, Morgan D, Allen TR (2013) Dependence on grain boundary structure of radiation induced segregation in a 9 wt% Cr model ferritic/martensitic steel. J Nucl Mater 435:172–18010.1016/j.jnucmat.2012.12.026 ↗
11. Humphreys FJ, Hatherly M (2003) Recrystallization and related annealing phenomena. Pergamon, Oxford
12. Eddahbi M, McNelley T, Ruano OA (2001) The evolution of grain boundary character during superplastic deformation of an Al-6%Cu-0.4%Zr alloy. Metall Trans A 32:1093–110210.1007/s11661-001-0120-z ↗
13. Kassner ME (2005) Recent developments in understanding the mechanism of five-power-law creep. Mater Sci Eng A 410–411:20–2310.1016/j.msea.2005.08.053 ↗
14. Di Martino SF, Riddle NB, Faulkner RG (2013) Controlling the ductile to brittle transition in Fe–9%Cr ODS steels. J Nucl Mater 442:124–13210.1016/j.jnucmat.2013.03.097 ↗
15. Oksiuta Z, Boehm-Courjault E, Baluc N (2010) Relation between microstructure and Charpy impact properties of an elemental and pre-alloyed 14Cr ODS ferritic steel powder after hot isostatic pressing. J Mater Sci 45:3921–3930. doi: 10.1007/s10853-010-4457-910.1007/s10853-010-4457-9 ↗
16. Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51:881–98110.1016/j.pmatsci.2006.02.003 ↗
17. Eddahbi M, Rauch EF (2009) Texture and Microstructure of low carbon steel processed by equal channel angular extrusion. Mater Sci Eng A 502:13–2410.1016/j.msea.2008.10.024 ↗
18. Gazder AA, Dalla Torre F, Gu CF, Davies CHJ, Pereloma EV (2006) Microstructure and texture evolution of bcc and fcc metals subjected to equal channel angular extrusion. Mater Sci Eng 415:126–13910.1016/j.msea.2005.09.065 ↗
19. Yalin M, Bamberger M, Rosen A (1995) Microstructural changes during creep of high chromium steel. Metall Trans A 26:401–40610.1007/BF02664676 ↗
20. Kim JH, Byun TS, Hoelzer DT (2010) Tensile fracture characteristics of nanostructured ferritic alloy 14YWT. J Nucl Mater 407:143–15010.1016/j.jnucmat.2010.09.054 ↗
21. Eddahbi M, Monge MA, Leguey T, Fernández P, Pareja R (2011) Texture and mechanical properties of Eurofer 97 steel processed by ECAP. Mater Sci Eng A 528:5927–593410.1016/j.msea.2011.04.006 ↗
22. Hielscher R, Schaeben H (2008) A novel pole figure inversion method: specification of the MTEX algorithm. J Appl Cryst 41:1024–103710.1107/S0021889808030112 ↗
23. Hautojärvi P (1979) Positrons in Solids. Springer, Berlin10.1007/978-3-642-81316-0 ↗
24. Ohkubo H, Tang Z, Nagai Y, Hasegawa M, Tawara T, kiritani M (2003) Positron annihilation study of vacancy-type defects in high-speed deformed Ni, Cu and Fe. Mater Sci Eng A 350:95–10110.1016/S0921-5093(02)00705-0 ↗
25. Priesmeyer HG, Bokuchava G (2006) Positron annihilation as an additional source of information about plastic deformation in structural materials. Mater Sci Eng A 437:54–5910.1016/j.msea.2006.04.059 ↗
26. Chen YZ, Csiszár G, Cizek J, Borchers C, Ungár T, Gotod S, Kirchheim R (2011) On the formation of vacancies in a-ferrite of a heavily cold-drawn. Scripta Mater 64:390–39310.1016/j.scriptamat.2010.10.039 ↗
27. Lu Z, Faulkner RG, Riddle N, Martino FD, Yang K (2009) Effect of heat treatment on microstructure and hardness of Eurofer 97, Eurofer ODS and T92 steels. J Nucl Mater 386–388:445–44810.1016/j.jnucmat.2008.12.152 ↗
28. Langdon TG (2013) Twenty five years of ultrafine-grained materials: achieving exceptional properties through grain refinement. Acta Mater 61:7035–705910.1016/j.actamat.2013.08.018 ↗
29. Gazder AA, Cao W, Davies CHJ, Pereloma EV (2008) An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion. Mater Sci Eng A 497:341–35210.1016/j.msea.2008.07.030 ↗
30. Kolahia A, Akbarzadeha A, Barnett MR (2009) Electron back scattered diffraction (EBSD) characterization of warm rolled and accumulative roll bonding (ARB) processed ferrite. J Mater Proc Technol 209:1436–144410.1016/j.jmatprotec.2008.03.064 ↗
31. Kostka A, Tak KG, Hellmig RJ, Estrin Y, Eggeler G (2007) On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite-ferritic steels. Acta Mater 55:539–55010.1016/j.actamat.2006.08.046 ↗
32. Frost HJ, Ashby MF (1982) Deformation mechanism maps: The plasticity and creep of metals and ceramics. Pergamon, Oxford
33. Rösler J, Arzt E (1990) A new model-based creep equation for dispersion strengthened materials. Acta Metall 38:671–68310.1016/0956-7151(90)90223-4 ↗
34. Fernnández P, García-Mazarío M, Lancha AM, Lapeña J (2004) Grain boundary microchemistry and metallurgical characterization of Eurofer 97 after simulated service conditions. J Nucl Mater 329–333:273–27710.1016/j.jnucmat.2004.04.055 ↗
35. Yu G, Nita N, Baluc N (2005) Thermal creep behavior of the Eurofer 97 RAFM steel and two European ODS Eurofer 97 steels. Fus Eng Des 75–79:1037–104110.1016/j.fusengdes.2005.06.311 ↗
36. Sakasegawa H, Ukai S, Tamura M, Ohtsua S, Tanigawa H, Ogiwara H, Kohyama A, Fujiwara M (2008) Creep constitutive equation of dual phase 9Cr-ODS steel. J Nucl Mater 373:82–8910.1016/j.jnucmat.2007.05.031 ↗
37. Wasilkowska A, Bartsch M, Messerschmidt U, Herzog R, Czyrska-Filemonowicz A (2003) Creep mechanism of ferritic oxide dispersion strengthened alloys. J Mater Proc Technol 133:218–22410.1016/S0924-0136(02)00237-6 ↗
38. Zakine C, Prioul C, François D (1996) Creep behavior of ODS steels. Mater Sci Eng A 219:102–10810.1016/S0921-5093(96)10415-9 ↗
39. Susila P, Sturm D, Heilmaier M, Murtya BS, Sarma SV (2011) Effect of yttria particle size on the microstructure and compression creep properties of nanostructured oxide dispersion strengthened ferritic (Fe-12Cr-2 W-0.5Y2O3) alloy. Mater Sci Eng A 528:4579–458410.1016/j.msea.2011.02.078 ↗
40. Sklenicka V, Kucharova K, Svoboda M, Kloc L, Bursık J, Kroupa A (2003) Long-term creep behavior of 9–12 %Cr power plant steels. Mater Charac 51:35–4810.1016/j.matchar.2003.09.012 ↗
41. Evans WJ, Harrison GF (1976) The development of a universal equation for secondary creep rates in pure metals and engineering alloys. Met Sci 10:307–31310.1179/msc.1976.10.9.307 ↗
42. Davies PW, Nelmes G, Williams KR, Wilshire B (1973) Stress change experiments during high temperature creep of copper, iron, and zinc. Met Sci J 7:87–9210.1179/030634573790445659 ↗
43. Lund RW, Nix WD (1976) High temperature creep of Ni-20Cr-2ThO2 single crystals. Acta Metall 24:469–48110.1016/0001-6160(76)90068-7 ↗
44. Lin J, Sherby OD (1981) Creep of oxide dispersion strengthened materials with special reference to T-D Nichrome. Res Mechanica 2:252–293
45. Pareja R, de Diego N, de la Cruz RM, del Río J (1993) Postirradiation recovery of a reactor pressure-vessel steel investigated by positron-annihilation and microhardness measurements. Nucl Technol 104:52–6310.13182/NT93-A34869 ↗
46. Slugen V, Segers D, de Bakker PMA, de Grave E, Magula V, Van Hoecke T, Van Wayenberge B (1999) Annealing behaviour of reactor pressure-vessel steels studied by positron-annihilation spectroscopy, Mössbauer spectroscopy and transmission electron microscopy. J Nucl Mater 274:273–28610.1016/S0022-3115(99)00073-2 ↗
47. Mäkkinen H, Mäkinen S, Manninen M (1990) Edge dislocation in fcc metals: microscopic and calculations of core structure and positron states in Al and Cu. Phys Rev B 41:12441–1245310.1103/PhysRevB.41.12441 ↗
48. Hidalgo C, González-Doncel G, Linderoth S, San Juan J (1992) Structure of dislocations in Al and Fe as studied by positron-annihilation spectroscopy. Phys Rev B 45:7017–702110.1103/PhysRevB.45.7017 ↗
49. Holzwarth U, Barbieri A, Hansen-Ilzhöfer S, Schaaff P, Haaks M (2001) Positron annihilation studies on the migration of deformation induced vacancies in stainless steel AISI 316L. Appl Phys A 73:467–47510.1007/s003390100781 ↗
50. Park YK, Waber JT, Meshii M, Snead CL Jr, Park CG (1986) Dislocation studies on deformed single crystals of high-purity iron using positron annihilation: determination of dislocation densities. Phys Rev B 34:823–83610.1103/PhysRevB.34.823 ↗
51. Vehanen A, Hautojärvi P, Johansson J, Yli-Kauppila J (1982) Vacancies and carbon impurities in alpha-iron-electron-irradiation. J Phys Rev B 25:762–78010.1103/PhysRevB.25.762 ↗
52. Kuramoto E, Takano Y, Kikuchi N, Takenaka M (1986) Positron annihilation lifetime measurements of irradiated iron and iron-chromium alloys. J Nucl Mater 141–143:829–83610.1016/0022-3115(86)90100-5 ↗
53. Ortega Y, de Castro V, Monge MA, Muñoz A, Leguey T, Pareja R (2008) Positron annihilation characteristics of ODS and non-ODS Eurofer isochronally annealed. J Nucl Mater 376:222–22810.1016/j.jnucmat.2008.03.005 ↗
54. Kuriplach J, Melikhova O, Domain C et al (2006) Vacancy-solute complexes and their clusters in iron. Appl Surf Sci 252:3303–330810.1016/j.apsusc.2005.08.075 ↗