journal article·2004-03

Spinning of the solutions of poly(vinyl alcohol)/NaCl/H2O systems and their fiber properties

K. Yamaura, T. Katoh, K. Koezuka, M. Iwaseya, Lixing Dai

Journal of Materials Science· Volume 39· Issue 5
Publisher page

Abstract

The NaCl/water solutions of commercial poly(vinyl alcohol) (a-PVA) with the degrees of polymerization and saponification of 1730 and 99.39%, respectively were gel-spun into methanol (−30°C) and then the removed NaCl dry-filaments were drawn at 200°C. The draw ratio showed the maximum at NaCl concentration CN = 3 wt% (polymer concentration CP = 150 kg/m3). The Young's modulus and strength at break were 95 and 6 GPa (λ = 19). In the case of DMSO system (CP = 170 kg/m3), the Young's modulus was 52 GPa (λ = 25) and the strength at break was 3.3 GPa. Under a polarized microscope, the fine lateral structure was observed for the DMSO system, but not for the NaCl system, that is, the smooth structure was recognized. The smooth structure, like a Netlon packing net for oranges, might be considered to result in heightening of mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · Advanced Sensor and Energy Harvesting Materials · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. P. Smith and P. J. Lemstra, J. Mater. Sci. 15 (1980) 505.10.1007/BF02396802 ↗
2. P. Smith, P. J. Lemstra, J. P. L. Pijpers and A. M. Kiel, Coll. Polym. Sci. 259 (1981) 1070.10.1007/BF01524892 ↗
3. P. Smith, P. J. Lemstra and H. C. Booij J. Polym. Sci. Polym. Phys. Ed. 19 (1981) 877.10.1002/pol.1981.180190514 ↗
4. C. Sawatari and M. Matsuo, Coll. Polym. Sci. 263 (1985) 783.10.1007/BF01412954 ↗
5. M. Matsuo and C. Sawatari, Macromolecules 19 (1986) 2036.10.1021/ma00161a042 ↗
6. I. Sakurada, T. Itoh and K. Nakamae, J. Polym. Sci. C15 (1966) 75.
7. K. Tashiro, M. Kobayashi and H. Tadokoro, J. Macromol. Sci. 10 (1977) 731.10.1021/ma60058a002 ↗
8. K. Yamaura, “Polymeric Materials Encyclopedia,” edited by J. C. Salamone (CRC Press, 1996) Vol. 9, p. 6998.
9. Y. Bin, Y. Tanabe, C. Nakabayashi, H. Kurosu and M. Matsuo, Polymer 42 (2001) 1183.10.1016/S0032-3861(00)00423-7 ↗
10. K. Agawa, Q. Wan, T. Tanigarni, S. Matsuzawa and K. Yamaura, J. Appl. Polym. Sci. 80 (2001) 467.10.1002/1097-4628(20010418)80:3<467::AID-APP1120>3.0.CO;2-E ↗
11. M. Matsuo, Y. Bin and M. Nakano, Polymer 42 (2001) 4687.10.1016/S0032-3861(00)00847-8 ↗
12. W. S. Lyoo, J. H. Kim, K. Koo, J. S. Lee, S. S. Kim, W. S. Yoon, D. C. Ji, I. C. Kwon and C. J. Lee, J. Polym. Sci., Polym. Phys. Ed. 39 (2001) 1263.10.1002/polb.1100 ↗
13. Y. Nagara, T. Nakano, Tamaki, Y. Okamoto, Y. Gotoh and M. Nagura, Polymer 42 (2001) 9679.10.1016/S0032-3861(01)00493-1 ↗
14. K. A. M. Abd El-Kader, S. F. Abdel Hamied, A. B. Mansour, A. M. Y. El-Lawindy and F. El-Tantaway, Polymer Testing 21 (2002) 847.10.1016/S0142-9418(02)00020-X ↗
15. M. Suzuki, T. Tanigami, S. Matsuzawa and K. Yamaura, J. Appl. Polym. Sci. 86 (2002) 970.
16. T. Kunugi, T. Kawasumi and T. Itoh, ibid. 40 (1990) 2101.10.1002/app.1990.070401123 ↗
17. L.-X. Dai, K. Ukai, S. M. Shaheen and K. Yamaura, Polymer Int. 51 (2002) 715.10.1002/pi.951 ↗
18. S. M. Shaheen, K. Ukai, L.-X. Dai, and K. Yamaura, ibid. 51 (2002) 1390.10.1002/pi.1061 ↗
19. K. Yamaura and M. Naitoh, J. Mater. Sci. 37 (2002) 705.10.1023/A:1013875427788 ↗