journal article·2011-09

Variation of solute distributions during deformation and bake hardening process and their effect on bake hardening phenomenon in ultra-low carbon bake hardening steels

Hua Wang, Wen Shi, Yan Lin He, Peng Peng Liu, Lin Li

Journal of Materials Science· Volume 46· Issue 18
Publisher page

Abstract

Three-dimensional atom probe was used to investigate solute carbon and other elements distributions during bake hardening process after pre-deformation and also to analyze their effect on bake hardening phenomenon of the steels. Two different kinds of bake hardening steels were prepared and annealed by water quenching. The as-received samples were pre-deformed at different levels (from 0 to 10%), and baked at 170 °C for 20 min. Distributions and concentrations of solute elements in the steels were characterized with three-dimensional atom probe. Bake hardening values of the steels were examined by tensile experiments. Three dimensional atom probe detection results indicate that C distribution changes little with the increase of pre-deformation in BH-Mn steel. In BH-P steel, however, with the increase of pre-deformation, more C clusters form in the matrix and C concentration decreases. Distribution patterns and the maximum separation distance method results prove that the C cluster is just C segregation or C together with P segregation rather than vanadium carbides precipitate. Moreover, bake hardening experiment results indicate that BH values are similar in the two BH steels and the BH values change only a little as the pre-deformation increases from 2 to 10%. The 4% pre-deformation induces the highest BH values in the two BH steels, and is considered to be the critical pre-deformation in making the balance of Cottrell atmosphere in the two BH steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Tanioku T, Hoboh Y, Okamoto A, Mizui N (1991) Development of a new bake-hardenable galvannealed sheet steel for automotive exposed panels. In: SAE Technical Paper 910293, Warrendale, pp 303–30810.4271/910293 ↗
2. Taylor KA, Speer JG (1997) Development of vanadium-alloyed, bake-hardenable sheet steels for hot-dip coated applications. In: 39th MWSP conference proceedings, ISS, vol XXXV, Indianapolis, pp 49–61
3. Hong MH, Cho NH, Kim SI, Kwon O, Lim SH, Moon WJ (2010) Met Mater Int 16:88310.1007/s12540-010-1205-2 ↗
4. Waterschoot T, Vandeputte S, De Cooman BC, Houbaert Y (1999) The Influence of P, Si and Mn on the mechanical properties and bake-hardening of Ti-ULC Steels. In: 41st MWSP conference proceedings, ISS, vol XXXVII, Indianapolis, pp 425–433
5. Birol Y (2010) J Mater Sci 45:6727. doi: https://doi.org/10.1007/s10853-010-4766-z10.1007/s10853-010-4766-z ↗
6. Milititsky M, Decooman B, Speer J, De Wispelaere N, Akdut N (2006) Metall Mater Trans A 37:211710.1007/BF02586132 ↗
7. Wen Y, Su Q, Wuttig M (1998) Interstitial analysis of ultra low carbon and interstitial free steels. In: 39th MWSP conference proceedings, ISS, vol XXXV, pp 271–280
8. De AK, De Blauwe K, Vandeputte S, De Cooman BC (2000) J Alloys Compd 310:40510.1016/S0925-8388(00)00973-7 ↗
9. Soenen B, De AK, Vandeputte S, De Cooman BC (2004) Acta Mater 52:348310.1016/j.actamat.2004.03.046 ↗
10. Al-Shalfan W, Speer JG, Findley K, Matlock DK (2006) Metall Mater Trans A 37A:206
11. Miller MK (2006) J Mater Sci 41:7808. doi: https://doi.org/10.1007/s10853-006-0518-510.1007/s10853-006-0518-5 ↗
12. Blavette D, Duval P, Letellier L, Guttmann M (1996) Acta Mater 44:499510.1016/S1359-6454(96)00087-0 ↗
13. Menand A, Cadel E, Pareige C, Blavette D (1999) Ultramicroscopy 78:6310.1016/S0304-3991(99)00046-7 ↗
14. Hono K (1999) Acta Mater 47:312710.1016/S1359-6454(99)00175-5 ↗
15. Wilde J, Cerezo A, Smith GDW (2000) Scr Mater 43:3910.1016/S1359-6462(00)00361-4 ↗
16. Ping DH, Hono K, Nie JF (2003) Scr Mater 48:101710.1016/S1359-6462(02)00586-9 ↗
17. Oh JC, Ohkubo T, Mukai T, Hono K (2005) Scr Mater 53:67510.1016/j.scriptamat.2005.05.030 ↗
18. Pereloma EV, Timokhina IB, Miller MK, Hodgson PD (2007) Acta Mater 55:258710.1016/j.actamat.2006.12.001 ↗
19. Caballero FG, Miller MK, Garcia-Mateo C, Capdevila C, Babu SS (2008) Acta Mater 56:18810.1016/j.actamat.2007.09.018 ↗
20. Yamaguchi Y, Takahashi J, Kawakami K (2009) Ultramicroscopy 109:54110.1016/j.ultramic.2008.11.017 ↗
21. Grennan-Heaven N, Cerezo A, Godfrey TJ, Smith GDW (2007) Ultramicroscopy 107:70510.1016/j.ultramic.2007.02.007 ↗
22. Rachbauer R, Stergar E, Massl S, Moser M, Mayrhofer PH (2009) Scr Mater 61:72510.1016/j.scriptamat.2009.06.015 ↗
23. Takahashi J, Tarui T, Kawakami K (2009) Ultramicroscopy 109:19310.1016/j.ultramic.2008.10.013 ↗
24. Takahashi J, Kawakami K, Otsuka H, Fujii H (2009) Ultramicroscopy 109:56810.1016/j.ultramic.2008.11.012 ↗
25. Liu QD, Liu WQ, Wang ZM, Zhou BX (2008) Acta Metall Sin 44:786 (in Chinese)
26. Wang H, Shi W, He YL, Fu RY, Li L (2011) Acta Metall Sin 3:263 (in Chinese)
27. De AK, Vandeputte S, Cooman BCD (2001) Scr Mater 44:69510.1016/S1359-6462(00)00638-2 ↗
28. Zhao JZ, De AK, De Cooman BC (2000) Mater Lett 44:37410.1016/S0167-577X(00)00062-8 ↗