Investigation of mechanical, electrical, and thermal properties of a Zn–1.26 wt% Al alloy
Source abstract
Abstract
Zn–1.26 wt% Al alloy was directionally solidified upward with a constant growth rate (V = 16.6 μm/s) in a wide range of temperature gradients (1.94–5.15 K/mm) and with a constant temperature gradient (G = 5.15 K/mm) in a wide range of growth rates (8.3–500 μm/s) with a Bridgman-type directional solidification furnace. The microhardness (HV) and tensile strength (σ) of alloy were measured from directionally solidified samples. The dependency of the microhardness, tensile strength for directionally solidified Zn–1.26 wt% Al alloy on the solidification parameters (G, V) and microstructure parameters (λ1, λ2) were investigated and the relationships between them were experimentally obtained using regression analysis. According to present results, the microhardness and tensile strength of directionally solidified Zn–1.26 wt% Al alloy increase with increasing solidification processing parameters and decrease with the microstructure parameters. Variations of electrical resistivity (ρ) with the temperature in the range of 300–650 K were also measured using a standard dc four-point probe technique for cast samples. The enthalpy of fusion and specific heat for same alloy was also determined by means of differential scanning calorimeter (DSC) from heating trace during the transformation from solid to liquid.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Yılmaz F, Elliott R (1989) J Mater Sci 24:2065. doi: 10.1007/BF0238542210.1007/BF02385422 ↗
2. Grugel RN (1995) Metall Mater Trans A 26:49610.1007/BF02664686 ↗
3. Çadırlı E, Gündüz M (2000) J Mater Sci 35:3837. doi: 10.1023/A:100482941396610.1023/A:1004829413966 ↗
4. Mullis AM (2003) J Mater Sci 38:2517. doi: 10.1023/A:102397772347510.1023/A:1023977723475 ↗
5. Li L, Zhang Y, Esling C, Zhao Z, Zuo Y, Zhang H, Cui J (2009) J Mater Sci 44:1063. doi: 10.1007/s10853-008-3158-010.1007/s10853-008-3158-0 ↗
6. Kumar A, Dutta P (2009) J Mater Sci 44:3952. doi: 10.1007/s10853-009-3539-z10.1007/s10853-009-3539-z ↗
7. Pandey JP, Prasad BK (1998) Metall Mater Trans A 29:124510.1007/s11661-998-0251-6 ↗
8. Calayag TS (1986) Zinc–aluminium (ZA) cast alloys. Proc Int Symp CIM, Toronto
9. Zhu YH, Man HC, Dorantes-Rosales HJ, Lee WB (2003) J Mater Sci 38:2925. doi: 10.1023/A:102445710930710.1023/A:1024457109307 ↗
10. Abou El-khair MT, Daoud A, Ismail A (2004) Mater Lett 58:175410.1016/j.matlet.2003.10.058 ↗
11. Ravindranathan P, Patil KC (1987) J Mater Sci 22:3261. doi: 10.1007/BF0116119010.1007/BF01161190 ↗
12. Zhu Y, Yan B, Huang W (1995) J Mater Sci Tech 11:10910.1179/mst.1995.11.2.109 ↗
13. Hung FY, Lui TS, Chen LH, You JG (2007) J Mater Sci 42:3865. doi: 10.1007/s10853-006-0463-310.1007/s10853-006-0463-3 ↗
14. Krupinska B, Dobrzanski LA, Rdzawski ZM, Labisz K (2010) Arch Mater Sci Eng 43:13
15. Morgan SWK (1985) Zinc and its alloys and compounds. Wiley, New York
16. Flores OV, Kennedy C, Murr LE, Brown D, Pappu S, Nowak BM, McClure JC (1998) Scr Mater 38:70310.1016/S1359-6462(97)00551-4 ↗
17. Park HS, Kimura T, Murakami T, Nagano Y, Nakata K, Ushio M (2004) Mater Sci Eng A 371:16010.1016/j.msea.2003.11.030 ↗
18. Pürcek G (2005) J Mater Process Technol 169:24210.1016/j.jmatprotec.2005.03.012 ↗
19. Osorio WR, Freire CM, Garcia A (2005) J Mater Sci 40:4493. doi: 10.1007/s10853-005-0852-z10.1007/s10853-005-0852-z ↗
20. Osorio WR, Freire CM, Garcia A (2005) J Alloys Compd 397:17910.1016/j.jallcom.2005.01.035 ↗
21. Santos GA, Neto CM, Osorio WR, Garcia A (2007) Mater Des 28:242510.1016/j.matdes.2006.09.009 ↗
22. Ding GL, Tewari SN (2002) J Cryst Growth 236:42
23. Hui J, Tiwari R, Wu X, Tewari SN, Trivedi R (2002) Metall Mater Trans A 33:349910.1007/s11661-002-0337-5 ↗
24. Feng J, Huang WD, Lin X, Pan QY, Li T, Zhou YH (1999) J Cryst Growth 197:39310.1016/S0022-0248(98)00916-6 ↗
25. Ganesan S, Chan CL, Poirier DR (1992) Mater Sci Eng A 151:9710.1016/0921-5093(92)90186-5 ↗
26. Bhat MS, Poirier DR, Heinrich JC (1995) Metall Mater Trans B 26:104910.1007/BF02654107 ↗
27. Smiths FM (1958) Bell Syst Tech J 37:71110.1002/j.1538-7305.1958.tb03883.x ↗
28. Valdes LB (1954) Proc IRE 42:42010.1109/JRPROC.1954.274680 ↗
29. Arı M, Saatçi B, Gündüz M, Meydaneri F, Bozoklu M (2008) Mater Charact 59:62410.1016/j.matchar.2007.05.014 ↗
30. Robinson P (2003) Practical specific heat determination by power compensation DSC. Perkin Elmer, Seer Gren
31. Massalski TB (ed) (1990) Binary alloy phase diagrams, vol 3. ASM International, Materials Park
32. Böyük U, Kaya H, Çadırlı E, Maraşlı N, Ülgen A (2010) J Alloys Compd 491:14310.1016/j.jallcom.2009.10.184 ↗
33. Kaya H, Çadırlı E, Böyük U, Maraşlı N (2008) App Surf Sci 255:30710.1016/j.apsusc.2008.08.080 ↗
34. Kaya H, Böyük U, Çadırlı E, Ocak Y, Akbulut S, Keşlioğlu K, Maraşlı N (2008) Met Mater Int 14:57510.3365/met.mat.2008.10.575 ↗
35. Vnuk F, Sahoo M, Van De Merwe R, Smith RW (1979) J Mater Sci 14:975. doi: 10.1007/BF0055073010.1007/BF00550730 ↗
36. Vnuk F, Sahoo M, Baragor D, Smith RW (1980) J Mater Sci 15:2573. doi: 10.1007/BF0055076210.1007/BF00550762 ↗
37. Telli AI, Kısakürek SE (1988) Mater Sci Technol 4:15310.1179/mst.1988.4.2.153 ↗
38. Rosenberger MR, Ares AE, Gatti IP, Schvezov CE (2010) Wear 268:153310.1016/j.wear.2010.01.023 ↗
39. Kaya H, Gündüz M, Çadırlı E, Uzun O (2004) J Mater Sci 39:6571. doi: 10.1023/B:JMSC.0000044897.98694.be10.1023/B:JMSC.0000044897.98694.be ↗
40. Kaya H, Çadırlı E, Gündüz M, Ülgen A (2003) J Mater Eng Perform 12:54410.1361/105994903100277201 ↗
41. Khan S, Ourdjini A, Hamed QS, Najafabadi MAA, Elliott R (1993) J Mater Sci 28:5957. doi: 10.1007/BF0036520810.1007/BF00365208 ↗
42. Osorio WR, Garcia A (2002) Mater Sci Eng A 325:10310.1016/S0921-5093(01)01455-1 ↗
43. Ares AE, Schvezov CE (2007) Metall Mater Trans A 38:148510.1007/s11661-007-9111-z ↗
44. Feng J, Huang WD, Lin X, Pan QY, Li T, Zhou YH (1999) J Mater Sci Lett 18:2910.1023/A:1006613023683 ↗