Influence of microstructural heterogeneity on the scaling between flow stress and relative density in microcellular Al–4.5 %Cu
Source abstract
Abstract
We explore the influence of the metal microstructure on the compressive flow stress of replicated microcellular 400-μm pore size Al–4.5 wt%Cu solidified at two different solidification cooling rates, in the as-cast and T6 conditions. It is found that the yield strength roughly doubles with age-hardening, but does not depend on the solidification cooling rate. Internal damage accumulation, measured by monitoring the rate of stiffness loss with strain, is similar across the four microstructures explored and equals that measured in similar microcellular pure aluminium. In situ flow curves of the metal within the open-pore microcellular material are back-calculated using the Variational Estimate of Ponte-Castaneda and Suquet. Consistent results are obtained with heat-treated microcellular Al–4.5 wt%Cu and are also obtained with separate data for pure Al; however, for the as-cast microcellular Al–4.5 wt%Cu, the back-calculated in situ metal flow stress decreases, for both solidification rates, with decreasing relative density of the foam. We attribute this effect to an interplay between the microstructural and mesostructural features of the microcellular material: variations in the latter with the former held constant can alter the scaling between flow stress and relative density within microcellular alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Heat and Mass Transfer in Porous Media
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Conde Y, Despois JF, Goodall R et al (2006) Replication processing of highly porous materials. Adv Eng Mater 8:795–80310.1002/adem.200600077 ↗
2. Goodall R, Mortensen A (2013) Porous metals. In: Hono K, Laughlin D (eds) Physical metallurgy, 5th edn. Elsevier, Amsterdam
3. Ashby MF, Evans A, Fleck NA, Gibson LJ, Hutchinson JW, Wadley HNG (2000) Metal foams: a design guide. Butterworth Heinemann, Boston
4. Tekoglu C, Gibson LJ, Pardoen T, Onck PR (2011) Size effects in foams: experiments and modeling. Prog Mater Sci 56:109–138. doi: 10.1016/j.pmatsci.2010.06.00110.1016/j.pmatsci.2010.06.001 ↗
5. Wadley HNG (2006) Multifunctional periodic cellular metals. Philos Trans R Soc A 364:3110.1098/rsta.2005.1697 ↗
6. Despois JF, Mueller R, Mortensen A (2006) Uniaxial deformation of microcellular metals. Acta Mater 54:4129–414210.1016/j.actamat.2006.03.054 ↗
7. Lehmhus D, Marschner C, Banhart J, Bomas H (2002) Influence of heat treatment on compression fatigue of aluminium foams. J Mater Sci 37:3447–3451. doi: 10.1023/a:101650690527110.1023/A:1016506905271 ↗
8. Lehmhus D, Banhart J (2003) Properties of heat-treated aluminium foams. Mater Sci Eng A 349:9810.1016/S0921-5093(02)00582-8 ↗
9. Feng Y, Tao N, Zhu Z, Hu S, Pan Y (2003) Effect of aging treatment on the quasi-static and dynamic compressive properties of aluminum alloy foams. Mater Lett 57:4058–406310.1016/S0167-577X(03)00265-9 ↗
10. Zhou J, Gao Z, Cuitino AM, Soboyejo WO (2004) Effects of heat treatment on the compressive deformation behavior of open cell aluminum foams. Mater Sci Eng A 386:118–12810.1016/S0921-5093(04)00933-5 ↗
11. Zhou J, Soboyejo WO (2004) Compression-compression fatigue of open cell aluminum foams: macro-/micro-mechanisms and the effects of heat treatment. Mater Sci Eng A 369:23–3510.1016/j.msea.2003.08.009 ↗
12. Cao XQ, Wang ZH, Ma HQ, Zhao LM (2006) Effects of heat treatment on dynamic compressive properties and energy absorption characteristics of open-cell aluminum alloy foams. Trans Nonferrous Met Soc China 16:159–163. doi: 10.1016/S1003-6326(06)60028-910.1016/S1003-6326(06)60028-9 ↗
13. Amsterdam E, De Hosson JTM, Onck PR (2008) The influence of cell shape anisotropy on the tensile behavior of open cell aluminium foam. Adv Eng Mater 10:877–881. doi: 10.1016/j.scriptamat.2008.05.02510.1002/adem.200800128 ↗
14. Amsterdam E, De Hosson JTM, Onck PR (2008) On the plastic collapse stress of open-cell aluminum foam. Scripta Mater 59:653–656. doi: 10.1016/j.scriptamat.2008.05.02510.1016/j.scriptamat.2008.05.025 ↗
15. Conde Y, Mortensen A (2008) Age-hardening response of replicated microcellular Al–4.5 %Cu. Adv Eng Mater 10:849–852. doi: 10.1002/adem.20080008610.1002/adem.200800086 ↗
16. Cluff DA, Esmaeili S (2008) Prediction of the effect of artificial aging heat treatment on the yield strength of an open-cell aluminum foam. J Mater Sci 43:1121–1127. doi: 10.1007/s10853-007-2271-910.1007/s10853-007-2271-9 ↗
17. Campana F, Pilone D (2009) Effect of heat treatments on the mechanical behaviour of aluminium alloy foams. Scripta Mater 60:679–682. doi: 10.1016/j.scriptamat.2008.12.04510.1016/j.scriptamat.2008.12.045 ↗
18. Wang Z, Li Z, Ning J, Zhao L (2009) Effect of heat treatments on the crushing behaviour and energy absorbing performance of aluminium alloy foams. Mater Des 30:977–982. doi: 10.1016/j.matdes.2008.06.05810.1016/j.matdes.2008.06.058 ↗
19. Thornton PH, Magee CL (1975) The deformation of aluminum foams. Metall Trans 6A:1253–126310.1007/BF02658535 ↗
20. Yamada Y, Shimojima K, Sakaguchi Y et al (2000) Effects of heat treatment on compressive properties of AZ91 Mg and SG91A Al foams with open cell structure. Mater Sci Eng A280:225–22810.1016/S0921-5093(99)00671-1 ↗
21. Kanahashi H, Mukai T, Yamada Y et al (2001) Experimental study for the improvement of the crashworthiness in az91 magnesium foam controlling its microstructure. Mater Sci Eng A308:283–28710.1016/S0921-5093(01)01199-6 ↗
22. Amsterdam E, Onck PR, De Hosson JTM (2005) Fracture and microstructure of open cell aluminum foam. J Mater Sci 40:581310.1007/s10853-005-4995-8 ↗
23. Zhou J, Allameh SM, Soboyejo WO (2005) Microscale testing of the strut in open-cell aluminum foams. J Mater Sci 40:429–43910.1007/s10853-005-6100-8 ↗
24. Jeon I, Katou K, Sonoda T, Asahina T, Kang K-J (2009) Cell wall mechanical properties of closed-cell Al foam. Mech Mater 41:60–73. doi: 10.1016/j.mechmat.2008.08.00210.1016/j.mechmat.2008.08.002 ↗
25. Conde Y, Mortensen A (2010) Solidification of Al–4.5 wt %Cu-replicated foams. Met Mater Trans A 41:2048–205510.1007/s11661-010-0297-0 ↗
26. San Marchi C, Despois JF, Mortensen A (2004) Uniaxial deformation of open-cell aluminum foam: the role of internal damage. Acta Mater 52:2895–290210.1016/j.actamat.2004.02.035 ↗
27. Fischer SF, Schüler P, Fleck C, Bührig-Polaczek A (2013) Influence of the casting and mould temperatures on the (micro)structure and compression behaviour of investment-cast open-pore aluminium foams. Acta Mater 61:5152–5161. doi: 10.1016/j.actamat.2013.04.06910.1016/j.actamat.2013.04.069 ↗
28. Mondolfo LF (1976) Aluminum alloys: structure and properties. Butterworths, London
29. Davis JR (ed) (1998) Metals handbook, desk edition, 2nd edn. ASM International, Metals Park
30. San Marchi C, Mortensen A (2001) Deformation of open-cell aluminum foam. Acta Mater 49:3959–396910.1016/S1359-6454(01)00294-4 ↗
31. San Marchi C, Mortensen A (2002) Infiltration and the replication process for producing metal sponges. In: Degischer HP, Kriszt B (eds) Handbook of cellular metals. Wiley, Weinheim
32. Despois JF, Marmottant A, Conde Y et al (2006) Microstructural tailoring of open-pore microcellular aluminium by replication processing. Mater Sci Forum 512:281–28810.4028/www.scientific.net/MSF.512.281 ↗
33. Diologent F, Goodall R, Mortensen A (2009) Surface oxide in replicated microcellular aluminium and its influence on the plasticity size effect. Acta Mater 57:286–29410.1016/j.actamat.2008.09.008 ↗
34. J-F Despois (2005) EPFL Thesis number 3268, Institute of Materials, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
35. Mortensen A, Flemings MC (1996) Solidification of binary hypoeutectic alloy matrix composite castings. Metall Mater Trans 27A:595–60910.1007/BF02648949 ↗
36. Goodall R, Marmottant A, Salvo L, Mortensen A (2007) Spherical pore replicated microcellular aluminium: processing and influence on properties. Mater Sci Eng A 465:124–135. doi: 10.1016/j.msea.2007.02.00210.1016/j.msea.2007.02.002 ↗
37. Diologent F, Conde Y, Goodall R, Mortensen A (2009) Microstructure, strength and creep of aluminium–nickel open cell foam. Philos Mag 89:1121–113910.1080/14786430902915396 ↗
38. Ponte-Castañeda P (1991) The effective mechanical properties of nonlinear isotropic composites. J Mech Phys Solids 39:45–7110.1016/0022-5096(91)90030-R ↗
39. Michel JC, Suquet PM (1992) The constitutive law of nonlinear viscous and porous materials. J Mech Phys Solids 40:783–81210.1016/0022-5096(92)90004-L ↗
40. Suquet PM (1993) Overall potentials and extremal surfaces of power law or ideally plastic composites. J Mech Phys Solids 41:981–100210.1016/0022-5096(93)90051-G ↗
41. Suquet PM (1995) Overall properties of nonlinear composites: a modified secant moduli theory and its link with Ponte Castaneda’s nonlinear variational procedure. Comptes Rendus de l’Académie des Sciences de Paris 320:563–571
42. Suquet P (1997) Effective properties of nonlinear composites. In: Suquet P (ed) Continuum micromechanics. Springer, New York10.1007/978-3-7091-2662-2 ↗
43. Ponte-Castañeda P, Suquet P (1998) Nonlinear composites. Adv Appl Mech 34:171–30210.1016/S0065-2156(08)70321-1 ↗
44. Mueller R, Mortensen A (2006) Simplified prediction of the monotonic uniaxial stress–strain curve of non-linear particulate composites. Acta Mater 54:214510.1016/j.actamat.2006.01.002 ↗
45. Mueller R, Soubielle S, Goodall R, Diologent F, Mortensen A (2007) On the steady-state creep of microcellular metals. Scripta Mater 57:3310.1016/j.scriptamat.2007.03.013 ↗
46. Gibson LJ, Ashby MF (1997) Cellular solids: structure and properties, 2nd edn. Cambridge University Press, Cambridge10.1017/CBO9781139878326 ↗
47. Diologent F, Goodall R, Mortensen A (2011) Activation volume in microcellular aluminium: size effects in thermally activated plastic flow. Acta Mater 59:6869–6879. doi: 10.1016/j.actamat.2011.07.02110.1016/j.actamat.2011.07.021 ↗
48. Diologent F, Goodall R, Mortensen A (2009) Creep of aluminium–magnesium open cell foam. Acta Mater 57:83010.1016/j.actamat.2008.10.019 ↗
49. Soubielle S, Diologent F, Salvo L, Mortensen A (2011) Creep of replicated microcellular aluminium. Acta Mater 59:440–450. doi: 10.1016/j.actamat.2010.09.03710.1016/j.actamat.2010.09.037 ↗
50. Moosbrugger C (ed) (2002) Atlas of stress–strain curves. ASM International, Materials Park
51. Mangipudi KR, van Buuren SW, Onck PR (2010) The microstructural origin of strain hardening in two-dimensional open-cell metal foams. Int J Solids Struct 47:2081–2096. doi: 10.1016/j.ijsolstr.2010.04.00910.1016/j.ijsolstr.2010.04.009 ↗
52. Mortensen A, Gungor MN, Cornie JA, Flemings MC (1986) Alloy microstructures in cast metal matrix composites. J Met 38:30–35
53. Mangipudi KR, Onck PR (2011) Multiscale modelling of damage and failure in two-dimensional metallic foams. J Mech Phys Solids 59:1437–1461. doi: 10.1016/j.jmps.2011.02.00810.1016/j.jmps.2011.02.008 ↗
54. Berveiller M, Zaoui A (1978) An extension of the self-consistent scheme to plastically-flowing polycrystals. J Mech Phys Solids 26:325–34410.1016/0022-5096(78)90003-0 ↗