journal article·2012-04

Transport properties of high-density polyethylene/ethylene propylene diene terpolymer blends

P. V. Anil Kumar, S. Anil Kumar, K. T. Varughese, Sabu Thomas

Journal of Materials Science· Volume 47· Issue 7
Publisher page

Abstract

Polymer blends based on high-density polyethylene and ethylene propylene diene terpolymer rubber (EPDM) were prepared. The sorption and diffusion of four aliphatic hydrocarbons through the blends were studied in the temperature range of 28–58 °C. Sulfur, dicumyl peroxide (DCP), and a mixture of sulfur and DCP (mixed) were used as cross-linking agents for the blends. Of the three systems, the peroxide vulcanized blends were found to exhibit the lowest penetrant uptake. This has been explained based on the higher rigidity of the –C–C– networks than the polysulfide linkages. The aliphatic liquid penetration through the matrix increased with increase in the EPDM content in the blend. The experimental observations were correlated with the morphology of the blends. Diffusion and permeation coefficients were calculated from the sorption data. A slight deviation from the Fickian trend was observed for the mechanism of transport with an increase in EPDM in the blends. The molar mass between cross-links and thermodynamic parameters of sorption was determined from the swelling data. The experimental observations were compared with various theoretical models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Membrane Separation and Gas Transport · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Chainey M (1989) In: Cheremisinoff NP (ed) Handbook of polymer sciecne and technology, composites and speciality applications, Vol 4. Marcel Dekker, New York
2. Crank J (1975) The mathematics of diffusion, 2nd edn. Clarendon Press, Oxford
3. Mark HF, Bikales NM, Overberge CG, Menges G (1986) Encyclopaedia of polymer science and engineering, vol 9. Wiley, New York
4. Naylor TD (1989) In: Booth C, Price C (eds) Comprehensive polymer science, vol 2. Pergamon Press, New York
5. Hopfenberg HB, Paul DR (1978) In: Paul DR, Newmann S (eds) Polymer blends, vol 10. Academic press, New York
6. George SC, Thomas S (2001) Prog Polym Sci 26:98510.1016/S0079-6700(00)00036-8 ↗
7. Cates DM, White HJ Jr. (1956) J Polym Sci 20:18110.1002/pol.1956.120200115 ↗
8. Kim HW, Park HB (2011) J Membr Sci 372:11610.1016/j.memsci.2011.01.053 ↗
9. Chen GQ, Scholes CA, Qiao GG, Kentish SE (2011) J Membr Sci 379:47910.1016/j.memsci.2011.06.023 ↗
10. Bhattacharya M, Biswas S, Bhowmick AK (2011) Polymer 52:156210.1016/j.polymer.2011.01.055 ↗
11. John B, Thomas SP, Varughese KT, Oommen Z, Thomas S (2011) J Polym Res 18:110110.1007/s10965-010-9512-3 ↗
12. Minnath MA, Unnikrishnan G, Purushothaman E (2011) J Membr Sci 379:36110.1016/j.memsci.2011.06.006 ↗
13. Manoj KC, Prajitha K, Rajesh C, Unnikrishnan G (2010) J Polym Res 17:110.1007/s10965-009-9283-x ↗
14. Prajitha K, Radhakrishnan CK, Unnikrishnan G, Varghese S, Sujith A (2010) Chem Eng Technol 33(1):9710.1002/ceat.200900268 ↗
15. Lue SJ, Tsai CL, Lee D-T, Mahesh KPO, Hua MY, Hu C–C, Jean YC, Lee KR, Lai JY (2010) J Membr Sci 349:32110.1016/j.memsci.2009.11.064 ↗
16. Katoch S, Sharma V, Kundu PP (2010) Chem Eng Sci 65:437810.1016/j.ces.2010.03.050 ↗
17. Buquet CL, Doudou BB, Chappey C, Dargent E, Marais S (2009) J Phys Chem B 113:344510.1021/jp810241z ↗
18. Friess K, Jansen JC, Vopicka O, Randova A, Hynek V, Sipek M, Bartovska L, Izak P, Dingemans M, Dewulf J, Langenhove HV, Drioli E (2009) J Membr Sci 338:16110.1016/j.memsci.2009.04.030 ↗
19. Choudalakis G, Gotsis AD (2009) Eur Polym J 45:96710.1016/j.eurpolymj.2009.01.027 ↗
20. Moldovan Z, Ionescu F, Alexandrescu L, Carsote C (2010) Polym Polym Comp 18:189
21. Coran AY, Patel RP (1996) In: Holden G, Legge NR, Quirk RP, Schroeder HE (eds) Thermoplastic elastomers, 2nd edn. Hanser Gardner, Munich, pp 153
22. Moldovan Z, Ionescu F, Vasilescu I, Litescu S, Alexandrescu L (2008) Revue Roumaine de Chimie 53:1051
23. Lin W, Cossar M, Dang V (2007) Polym Testing 26:81410.1016/j.polymertesting.2007.05.004 ↗
24. George SC, Knorgen M, Thomas S (1999) J Membr Sci 163:110.1016/S0376-7388(99)00098-8 ↗
25. Flory PJ, Rehner JR Jr (1943) J Chem Phy 11:52110.1063/1.1723792 ↗
26. George J, Varughese KT, Thomas S (2000) Polymer 41:150710.1016/S0032-3861(99)00302-X ↗
27. Unnikrishnan G, Thomas S (1996) Polymer 37:268710.1016/0032-3861(96)87629-4 ↗
28. Langley NR (1968) Macromolecules 1:34810.1021/ma60004a015 ↗
29. Lee S, Pawlowski H, Coran AY (1986) Rubber Chem Technol 67:85410.5254/1.3538716 ↗
30. Schneider NS, Illinger JL, Cleaves MA (1986) Poly Eng Sci 26:154710.1002/pen.760262204 ↗
31. Harogoppad SB, Aminabhavi TM (1991) Polymer 32:87010.1016/0032-3861(91)90513-I ↗
32. Anilkumar PV, Varughese KT, Thomas S (2002) Polym Polym Comp 10:553
33. Harogoppad SB, Aminabhavi TM (1991) Macromolecules 24:259810.1021/ma00009a070 ↗
34. Joseph A, Mathai AE, Thomas S (2003) J Membr Sci 220:1310.1016/S0376-7388(03)00175-3 ↗
35. Peteropoulos JH (1994) In: Paul DR, Yampoliskii YP (eds) Polymeric gas separation membranes. CRC Press, Boca Raton
36. Peteropoulos JH (1985) J Polym Sci Part B: Polym Phys 23:130910.1002/pol.1985.180230703 ↗
37. Hopfenberg HB, Paul DR (1976) In: Paul DR (ed) Polymer blends, vol 1. Academic Press, New York, pp 445
38. Robeson LM, Noshay A, Matzner M, Merriam CN (1973) Die Angew, Makromol Chem 29–30:4710.1002/apmc.1973.050290103 ↗
39. Flory PJ (1953) Principles of polymer chemistry. Cornell University Press, Ithaca
40. Treloar LRG (1975) The physics of rubber elasticity. Clarendon Press, Oxford
41. Mark JE, Erman B (1988) Rubberlike elasticity: a molecular primer. Wiley, New York