journal article·2006-04

Corrosion properties of plasma-sprayed Al2O3-TiO2 coatings on Ti metal

Yo-Seung Song, In-Gyu Lee, Shin Nam Hong, Bae-Yeon Kim, Koo Hyun Lee, Deuk Yong Lee

Journal of Materials Science· Volume 41· Issue 7
Publisher page

Abstract

Three different oxides of CrO2-TiO2, Al2O3 and Al2O3-TiO2 were plasma-sprayed on Ti substrate to evaluate the crystal structure and the corrosion properties of the coatings. No phase change of the coatings after corrosion test in 0.5 M H2SO4 solution at 25°C was found regardless of the presence of the NiCoCrAlY bond layer. Electrochemical measurements and SEM results revealed that the single coatings without the bond layer were always effective against corrosion resistance due to lower current density within the passive region. Pitting corrosion of the surface was observed for the Al2O3 coating. It can be concluded that the Al2O3-TiO2 coating without the bond layer may be the best oxide among the oxides investigated due to low porosity (5.4%), smooth surface roughness (4.5 μm), low current density (6.3 × 10‒8 A/cm2) in the passive region, low corrosion potential (Ecorr, ‒0.55 V) and no pitting corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. C. ANGELINETTA, S. TRASATTI, LJ. D. ATANASOSKA, Z. S. MINEVSKI and R. T. ATANSOSKI, Mater. Chem. Phys. 22 (1989) 231.10.1016/0254-0584(89)90039-4 ↗
2. Y. SONG, D. Y. LEE and B. KIM, Mater. Lett. 58 (2004) 817.10.1016/j.matlet.2003.07.019 ↗
3. K. CHAE, H. CHOI, J. AHN, Y. SONG and D. Y. LEE, Mater. Lett. 55 (2002) 211.10.1016/S0167-577X(01)00648-6 ↗
4. Idem. J. Mater. Sci. 37 (2002) 3515.10.1023/A:1016575425744 ↗
5. K. NAM, K. LEE, S. KWON, D. Y. LEE and Y. SONG, Mater. Lett. 58 (2004) 3540.10.1016/j.matlet.2004.06.038 ↗
6. Y. SONG, Y. NAM, K. LEE and D. Y. LEE, Mater. Sci. Forum 449-452 (2004) 465.10.4028/www.scientific.net/MSF.449-452.465 ↗
7. Y. CHOI, S. KIM, Y. SONG and D. Y. LEE, J. Mater. Sci. 39 (2004) 5695.10.1023/B:JMSC.0000040078.09843.cb ↗
8. R. MCPHERSON, Surf. Coat. Technol. 39/40 (1989) 173.10.1016/0257-8972(89)90052-2 ↗
9. YU. I. EVDOKIMENKO, V. M. KISEL, V. KH. KADYROV, A. A. KOROL and O. I. GET'MAN, Powder Metallurgy Metal Ceram. 40 (2001) 121.10.1023/A:1011967119969 ↗
10. Y. SONG, I. LEE, D. Y. LEE, D. KIM, S. KIM and K. LEE, Mater. Sci. & Eng. A 332 (2002) 129.10.1016/S0921-5093(01)01735-X ↗
11. K. J. KURZYDLOWSKI and B. RALPH, The Quantitative Description of the Microstructure of Materials (CRC Press, Florida, 1995) p. 356.
12. P. S. SANTOS, H. S. SANTOS and S. P. TOLEDO, Mater. Res. 3 (2000) 104.10.1590/S1516-14392000000400003 ↗
13. L. LI, X. Y. WANG, G. WEI, A. VAIDYA, H. ZHANG and S. SAMPATH, Thin Solid Films 468 (2004) 113.10.1016/j.tsf.2004.05.073 ↗