journal article·2012-01

An investigation into the capability of unconventional amount of aluminum and nano-alumina to alter the mechanical response of magnesium

Q. B. Nguyen, Yi Fan, K. S. Tun, J. Chan, R. Kwok, J. V. M. Kuma, M. Gupta

Journal of Materials Science· Volume 47· Issue 1
Publisher page

Abstract

In the present study, magnesium aluminum alloys with aluminum content exceeding conventional alloying limit (Mg–10Al, Mg–15Al, and Mg–20Al) and the composite of Mg–10Al alloy with 1.5 volume percentage of nano-alumina particulates are created using the technique of disintegrated melt deposition. Significant improvements in microstructure and mechanical properties compared with pure magnesium are obtained. Intermetallic phase Mg17Al12 was detected in all the materials. The increase in amount of aluminum in magnesium led to a reduction in coefficient of thermal expansion and a marginal increase in porosity. Yield strength, ultimate tensile strength, and hardness increased significantly with an increasing amount of aluminum. The 0.2% yield strength increased from 140 to 394 MPa (181%) in the case of Mg–20Al. Ductility reduced with progressive addition of aluminum. However, the addition of both Al and nano-alumina particulates significantly increased not only strengths, but also ductility of pure Mg. The overall tensile properties assessed in terms of work of fracture increased by almost 143% in the case of composite sample. An attempt is made in this study to correlate the tensile response of alloys and composite with their microstructural characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Shackelford JF (2009) Introduction to materials science for engineers. Pearson Prentice Hall, Upper Saddle River
2. Srivatsan TS, Vasudevan S, Petrorali M (2008) J Alloy Compds 460:38610.1016/j.jallcom.2007.06.079 ↗
3. Umeda J, Kawakami M, Kondoh K, Ayman ELS, Imai H (2010) Mater Chem Phys 123:64910.1016/j.matchemphys.2010.05.033 ↗
4. Dahle AK, Lee YC, Nave MD, Schaer PL, StJohn DH (2001) J Light Metals 1:6110.1016/S1471-5317(00)00007-9 ↗
5. Nguyen QB, Gupta M (2008) J Alloy Compds 459:24410.1016/j.jallcom.2007.05.038 ↗
6. Wang J, Ding Z, Qi F, Zhu H, Fan Y (2010) J Alloy Compds 507:32210.1016/j.jallcom.2010.07.191 ↗
7. Hirai K, Somekawa H, Takigawa Y, Higashi K (2005) Mater Sci Eng A 403:27610.1016/j.msea.2005.05.028 ↗
8. Yang M, Zhua Y, Lianga X, Pan F (2011) Mater Sci Eng A 528:172110.1016/j.msea.2010.11.007 ↗
9. ASM Metals Handbook (1990) Properties and selection non-ferrous alloys and special purpose materials, vol 2, 10th edn. ASM Metals Handbook, Metals Park, p 48110.31399/asm.hb.v02.9781627081627 ↗
10. El-Amoush AS (2008) J Alloy Compds 463:47510.1016/j.jallcom.2007.09.060 ↗
11. Trojanová Z, Gärtnerová V, Jäger A, Námešny A, Chalupová M, Palcˇek P, Lukác P (2009) Comp Sci Technol 69:225610.1016/j.compscitech.2009.06.016 ↗
12. Suna M, Wua G, Wang W, Ding W (2009) Mater Sci Eng A 523:14510.1016/j.msea.2009.06.002 ↗
13. Candan S, Unal M, Koc E, Turen Y, Candan E (2011) J Alloy Compds 509:195810.1016/j.jallcom.2010.10.100 ↗
14. Xie H, Jia L, Zhang J, Wang Z, Lu Z (2009) Mater Sci Eng A 519:20410.1016/j.msea.2009.05.053 ↗
15. Nguyen QB, Gupta M (2010) Mater Sci Eng A 527:141110.1016/j.msea.2009.11.002 ↗
16. Deng KK, Wu K, Wang XJ, Wu YW, Hu XS, Zheng MY, Gan WM, Brokmeier HG (2010) Mater Sci Eng A 527:163010.1016/j.msea.2009.10.053 ↗
17. Tun KS, Gupta M (2007) J Comp Sci Technol 67:265710.1016/j.compscitech.2007.03.006 ↗
18. Nguyen QB, Gupta M (2009) J Comp Mater 43:510.1177/0021998308096333 ↗
19. Hassan SF, Gupta M (2006) J Alloy Compd 419:8410.1016/j.jallcom.2005.10.005 ↗
20. Hassan SF, Ho KF, Gupta M (2004) Mater Lett 58:214310.1016/j.matlet.2004.01.011 ↗
21. Ashby MF (1981) Prog Mater Sci, Bruce Chalmers Anniversary Volume, p 1.
22. Dodd B, Bai Y (1987) Ductile fracture and ductility. Academic Press Inc, Ltd, London