Fabrication of new porcelain body using nonplastic raw materials by slip casting
Source abstract
Abstract
New porcelain bodies using only nonplastic raw materials, such as volcanic glass, quartz, alumina and aluminous cement, were fabricated, and their properties were investigated. Green strength increased with increasing Al2O3 content at the constant amount of volcanic glass and aluminous cement, caused by the increase of green bulk density with small sized Al2O3 addition. The phases in the fired body were glass, α-quartz, cristobalite, anorthite and α-Al2O3. High flexural strength with 10 wt% Al2O3 addition was attributed to a strong residual stress induced by the large difference in the thermal expansion coefficient between the glass matrix and the quartz grains, and an additional prestress was induced by Al2O3 grains. Higher density and fewer fracture origin were also indicated as potential factors leading to the strengthening effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Advanced ceramic materials synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. C. OLAGNON, D. MC GARRY and E. NAGY, Br. Ceram. Trans. J. 88 (1989) 75.
2. N. MIZUTANI, T. OGIHARA, M. KONDO, M. IKEDA and K. SHINOZAKI, J. Mater. Sci. 29 (1994) 366.10.1007/BF01162492 ↗
3. M. P. ALBANO and L. B. GARRIDO, J. Amer. Ceram. Soc. 81 (1998) 837.10.1111/j.1151-2916.1998.tb02417.x ↗
4. K. HAMANO, Y. H. WU, Z. NAKAGAWA and M. HASEGAWA, J. Ceram. Soc. Jpn. 99 (1991) 1110.10.2109/jcersj.99.1110 ↗
5. N. SUGIYAMA, R. HARADA and H. ISHIDA, ibid. 104 (1996) 312.10.2109/jcersj.104.312 ↗
6. K. MISHIMA, “Seramikku Kogaku Handobukku” (Ceramic Engineering Handbook) (Ceramic Society of Japan, Gihodo Shuppan, 1989) p. 1105 [in Japanese].
7. W. P. TAI, K. KIMURA, H. TATEYAMA, N. YAMADA and K. JINNAI, J. Ceram. Soc. Jpn. 107 (1999).10.2109/jcersj.107.8 ↗
8. E. M. LEVIN, C. R. ROBBINS and H. F. MCMURDIE, “Phase Diagrams for Ceramists,”Vol. 1 (American Ceramic Society, Columbus, OH, 1964) Fig. 630.
9. B. P. BORGLUM, J. M. BUKOWSKI, J. F. YOUNG and R. C. BUCHANAN, J. Amer. Ceram. Soc. 76 (1993) 1354.10.1111/j.1151-2916.1993.tb03765.x ↗
10. L. MATTYASOVSZKY-ZSOLNAY, ibid. 40 (1957) 299.10.1111/j.1151-2916.1957.tb12626.x ↗
11. K. HAMANO and M. HIRAYAMA, J. Ceram. Soc. Jpn. 102 (1994) 665.10.2109/jcersj.102.665 ↗
12. C. R. AUSTIN, H. Z. SCHOFIELD and N. L. HALDY, J. Amer. Ceram. Soc. 29 (1946) 341.10.1111/j.1151-2916.1946.tb11608.x ↗
13. R. HARADA, N. SUGIYAMA and H. ISHIDA, Ceram. Eng. Sci. Proc. 17 (1996) 88.
14. W. M. CARTY and U. SENAPATI, J. Amer. Ceram. Soc. 81 (1998) 3.10.1111/j.1151-2916.1998.tb02290.x ↗
15. S. J. MCDOWELL and E. J. VACHUSKA, ibid. 10 (1927) 64.10.1111/j.1151-2916.1927.tb17985.x ↗
16. S. C. SANE and R. L. COOK, ibid. 34 (1951) 145.10.1111/j.1151-2916.1951.tb11624.x ↗
17. Y. KOBAYASHI and E. KATO, ibid. 77 (1994) 833.10.1111/j.1151-2916.1994.tb05373.x ↗
18. N. SUGIYAMA, R. HARADA and H. ISHIDA, J. Ceram. Soc. Jpn. 105 (1997) 126.10.2109/jcersj.105.126 ↗
19. S. T. LUNDIN, “Microstructure of Ceramic Materials” Vol. 257 (NBS Misc. Publ., 1964) p. 93.
20. W. F. COLE, H. SORUM and W. H. TAYLOR, Acta Crystallog. 4 (1951) 20.10.1107/S0365110X51000040 ↗
21. “CRC Handbook of Chemistry and Physics,” 74th ed., edited by D. R. Lide and H. P. R. Frederikse (Boca Raton, FL, 1993) pp. 4–37.
22. S. MAITY and B. K. SARKAR, J. Eur. Ceram. Soc. 16 (1996) 1083.10.1016/0955-2219(96)00033-7 ↗
23. W. E. BIODGETT, Am. Ceram. Soc. Bull. 40 (1961) 74.
24. K. HAMANO, Y. H. WU, Z. NAKAGAWA and M. HASEGAWA, J. Ceram. Soc. Jpn. 99 (1991) 153.10.2109/jcersj.99.153 ↗