β-Crystal in the iPP melt encapsulated by transcrystallinity and spherulites: effect of molecular weight
Source abstract
Abstract
The crystallization in isotactic polypropylene (iPP) melt inclusions, encapsulated by transcrystallinity and spherulites, was investigated by polarized light microscope. Generally, owing to the proceeding of crystallization in melt inclusions, a negative pressure will be built up. Up to a critical value, the negative pressure is released by the formation of cavitation in melt. Unexpectedly, β-crystals with different morphologies emerge at different locations in the melt inclusions. For low molecular weight iPP, only smaller β-crystals around bubbles are discernable. Turn to higher molecular weight iPP, apart from the smaller β-crystals, fan-shaped ones can be developed under suitable conditions (e.g., lower than 131 °C) at the growth front of spherulites and transcrystallinity. Considering the characteristics of molecular weight and morphology, it is proposed that β-crystals are induced by different mechanisms. That is, smaller β-crystals are resulted from the stress caused by the appearance of bubbles while the fan-shaped ones are derived due to the temperature gradient during the release of negative pressure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Galeski A, Koenczoel L, Piorkowska E, Baer E (1987) Nature 325:4010.1038/325040a0 ↗
2. Piorkowska E, Galeski A (1993) J Polym Sci B Polym Phys 31:128510.1002/polb.1993.090311003 ↗
3. Thomann R, Wang C, Kressler J, Mülhaupt R (1996) Macromol Chem Phys 197:108510.1002/macp.1996.021970326 ↗
4. Nowacki R, Kolasinska J, Piorkowska E (2001) J Appl Polym Sci 79:243910.1002/1097-4628(20010328)79:13<2439::AID-APP1051>3.0.CO;2-# ↗
5. Galeski A, Piorkowska E (1983) J Polym Sci Polym Phys Ed 21:129910.1002/pol.1983.180210803 ↗
6. Galeski A, Piorkowska E (1983) J Polym Sci Polym Phys Ed 21:131310.1002/pol.1983.180210804 ↗
7. Pawlak A, Piorkowska E (1999) J Appl Polym Sci 74:138010.1002/(SICI)1097-4628(19991107)74:6<1380::AID-APP9>3.0.CO;2-M ↗
8. Pawlak A, Galeski A (1990) J Polym Sci B Polym Phys 28:181310.1002/polb.1990.090281012 ↗
9. Monasse B, Haudin JM (1985) Colloid Polym Sci 263:82210.1007/BF01412960 ↗
10. Varga J, Ehrenstein GW (1996) Polymer 37:595910.1016/S0032-3861(96)00565-4 ↗
11. Vancso GJ, Liu G, Karger-Kocsis J, Varga J (1997) Colloid Polym Sci 275:18110.1007/s003960050069 ↗
12. Varga J, Karger-Kocsis J (1996) J Polym Sci B Polym Phys 34:65710.1002/(SICI)1099-0488(199603)34:4<657::AID-POLB6>3.0.CO;2-N ↗
13. Nowacki R, Monasse B, Piorkowska E, Galeski A, Haudin JM (2004) Polymer 45:487710.1016/j.polymer.2004.04.058 ↗
14. Varga J, Menyhárd A (2007) Macromolecules 40:242210.1021/ma062815j ↗
15. Nowacki R, Piorkowska E (2007) J Appl Polym Sci 105:105310.1002/app.26186 ↗
16. Liang YY, Liu SY, Dai K, Wang B, Shao CG, Zhang QX et al (2012) Colloid Polym Sci 290:115710.1007/s00396-012-2626-x ↗
17. Sun XL, Li HH, Zhang XQ, Wang DJ, Schultz JM, Yan S (2010) Macromolecules 43:56110.1021/ma9019784 ↗
18. Varga J (1992) J Mater Sci 27:2557. doi: 10.1007/BF005406710.1007/BF00540671 ↗
19. Li QT, Zheng GQ, Dai K, Xie MC, Liu CT, Liu BC et al (2011) Mater Lett 65:227410.1016/j.matlet.2011.04.035 ↗
20. Tadakazu M, Toru M (1998) Polymer 39:551510.1016/S0032-3861(97)10203-8 ↗
21. Lovinger AJ, Chua JO, Gryte CC (1977) J Poym Sci Polym Phys Ed 15:64110.1002/pol.1977.180150405 ↗
22. Wang C, Liu FH, Huang WH (2011) Polymer 52:132610.1016/j.polymer.2011.01.036 ↗
23. Kajioka H, Yoshimoto S, Taguchi K, Toda A (2010) Macromolecules 43:383710.1021/ma9028486 ↗