journal article·2010-12

Synthesis of TiC from porous carbon coating on Si–C–O (Nicalon) fibres by reactive chemical vapour deposition in pressure-pulsed mode or at atmospheric pressure

I. Jouanny, S. Jacques, P. Weisbecker, C. Labrugère, M. Lahaye, L. Maillé, R. Pailler

Journal of Materials Science· Volume 45· Issue 24
Publisher page

Abstract

TiC coatings were synthesised on NL202 Nicalon fibres through the treatment of a porous carbon coating at the surface of the fibres by thermal reactive chemical vapour deposition (RCVD) either in pressure-pulsed (P-RCVD) mode at low pressure or at atmospheric pressure (AP-RCVD) with a H2/TiCl4 gaseous mixture. The conversion rate of C into TiC was studied as a function of the H2/TiCl4 pulse number for the P-RCVD method and as a function of the treatment time for the AP-RCVD method. Chemical and micro-structural characterisations of the coatings were carried out by X-ray photoelectron spectroscopy, Auger electron spectroscopy and scanning and transmission electron microscopies. Mechanical assessment was achieved by tensile tests at room temperature. For the P-RCVD method, the conversion rate increased when the number of H2/TiCl4 pulses increased from 20 to 100. Once 20 H2/TiCl4 pulses were performed, an interlayer made of TiC was observed at the carbon coating/fibre interface indicating that the H2/TiCl4 gas has diffused inside the porous carbon and has reacted in depth and more particularly at the coating/fibre interface. With 100 pulses, the carbon coating was totally converted. For the AP-RCVD method, the conversion rate increased when the treatment time increased from 30 to 60 min. The reaction of conversion began preferentially at the outermost surface of the carbon coating but several isolated TiC grains were also observed at the coating/fibre interface. At atmospheric pressure, the gaseous mixture was more reactive than at low pressure whereas the diffusion of the gaseous species was limited inside the carbon coating. The mechanical properties of the fibre decreased when the conversion rate of the carbon into TiC increased both in P-RCVD and AP-RCVD.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Pichon T, Barreteau R, Soyris P, Foucault A, Parenteau JM, Prel Y, Guedron S (2009) Acta Astronaut 65:16510.1016/j.actaastro.2009.01.035 ↗
2. Bhatt RT, Choi SR, Cosgriff LM, Fox DS, Lee KN (2008) Mater Sci Eng A 476(1–2):2010.1016/j.msea.2007.04.066 ↗
3. Naslain R (1998) Composites A 29A:114510.1016/S1359-835X(97)00128-0 ↗
4. Carpenter HW, Bohlen JW, Steffier WS (1992) US Patent No. 5,221,578
5. Holmquist M, Lundberg R, Sudre O, Razzell AG, Molliex L, Benoit J, Adlerborn J (2000) J Eur Ceram Soc 20:59910.1016/S0955-2219(99)00258-7 ↗
6. Nubian K, Saruhan B, Kanka B, Schmücker M, Schneider H, Wahl G (2000) J Eur Ceram Soc 20:53710.1016/S0955-2219(99)00251-4 ↗
7. Jacques S, Rapaud O, Parola S, Verdenelli M (2005) Ann Chim 30(6):60910.3166/acsm.30.609-620 ↗
8. Gogotsi Y, Jeon I, McNallan MJ (2003) Ceram Eng Sci Proc 24(3):57
9. Piquero T, Vincent H, Vincent C, Bouix J (1995) Carbon 33(4):45510.1016/0008-6223(94)00170-5 ↗
10. Rapaud O, Jacques S, Di-Murro H, Vincent H, Berthet M-P, Bouix J (2004) J Mater Sci 39:173. doi: 10.1023/B:JMSC.0000007742.34926.6510.1023/B:JMSC.0000007742.34926.65 ↗
11. Delcamp A, Maillé L, Saint Martin S, Pailler R, Guette A (2010) Comp Sci Technol 70(4):62210.1016/j.compscitech.2009.12.012 ↗
12. Dupel P, Bourrat X, Pailler P (1995) Carbon 33(9):119310.1016/0008-6223(95)00029-D ↗
13. Heurtevent F (1996) PhD thesis no 1476. University of Bordeaux-1, France
14. Naslain R, Pailler R, Bourrat X, Bertrand S, Heurtevent F, Dupel P, Lamouroux F (2001) Solid State Ionics 141–142:54110.1016/S0167-2738(01)00743-3 ↗
15. Weisbecker P, Guette A (2009) In: Proceedings of 17th international conference on composite materials, 27:D3:1, ICCM 17, Edinburgh
16. Lamon J, Rechiniac C, Lissart N, Corne P (1992) In: Bunsell AR, Jamet JF, Massiah A (eds) Proceedings of the 5th European conference on composite materials, Bordeaux, France (EACMCEC, Paris, Bordeaux, 1992), pp 895–900
17. Pailler R, Lamon J, Guette A, Sauder C, Martin-Litas I (2005) Ann Chim 30(6):56510.3166/acsm.30.565-578 ↗
18. Bunsell AR, Berger M-H (2000) J Eur Ceram Soc 20:224910.1016/S0955-2219(00)00090-X ↗
19. Ochiai S, Murakami Y (1979) J Mater Sci 14:831. doi: 10.1007/BF0055071410.1007/BF00561304 ↗
20. Ochiai S, Osamura K, Honjo K (1992) Mater Sci Eng A 154:14910.1016/0921-5093(92)90340-7 ↗
21. Bertrand P, Vidal-Sétif M-H, Valle R, Mévrel R (1998) J Mater Sci 33(20):5029. doi: 10.1023/A:100446722624810.1023/A:1004467226248 ↗
22. R’Mili M, Massardier V, Merle P, Vincent H, Vincent C (1999) Carbon 37:12910.1016/S0008-6223(98)00197-3 ↗