The strain rate and temperature dependence of microstructural evolution of Ti–15Mo–5Zr–3Al alloy
Source abstract
Abstract
A compressive split-Hopkinson pressure bar apparatus and transmission electron microscopy (TEM) are used to investigate the deformation behaviour and microstructural evolution of Ti–15Mo–5Zr–3Al alloy deformed at strain rates ranging from 8 × 102 s−1 to 8 × 103 s−1 and temperatures between 25 °C and 900 °C. In general, it is observed that the flow stress increases with increasing strain rate, but decreases with increasing temperature. The microstructural observations reveal that the strengthening effect evident in the deformed alloy is a result, primarily, of dislocations and the formation of α phase. The dislocation density increases with increasing strain rate, but decreases with increasing temperature. Additionally, the square root of the dislocation density varies linearly with the flow stress. The amount of α phase increases with increasing temperature below the β transus temperature. The maximum amount of α phase is formed at a temperature of 700 °C and results in the minimum fracture strain under the current loading conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Steinemann SG (1984) Ti Sci Tech 2:1327
2. Dobbs HS, Scales JT (1983) In: ASTM. Philadelphia, 1983, p 173
3. Nichols KG, Puleo DA (1997) J Biomed Mater Res 35:25610.1002/(SICI)1097-4636(199705)35:2<265::AID-JBM14>3.0.CO;2-G ↗
4. Katsuhiko M, Kenji D, Tomiharu M, Yoshio S (2002) Mater Trans 43:293610.2320/matertrans.43.2936 ↗
5. Kim HM, Takadama H, Kokubo T, Nishiguchi S, Nakamura T (2000) Biomaterials 21:35310.1016/S0142-9612(99)00190-8 ↗
6. Murr LE (1978) Scripta Mater 12:20110.1016/0036-9748(78)90164-3 ↗
7. Lee WS, Shyu JC, Chiou ST (2000) Scripta Mater 42:5110.1016/S1359-6462(99)00308-5 ↗
8. Boyer R, Welsch G, Collings EW (1994) In: Materials properties handbook: Titanium alloys. Materials Park, ASM International
9. Ikeda M, Komatsu SY, Sugimoto T, Hasegawa M (1998) Mater Sci Eng A 243:14010.1016/S0921-5093(97)00791-0 ↗
10. Komatsu Shin-ya, Ikeda M, Sugimoto T, Kamei K, Maesaki O, Kojima Masa-aki (1996) Mater Sci Eng A 213:6110.1016/0921-5093(96)10228-8 ↗
11. Ikeda M, Komatsu Shin-ya, Sugimoto T, Hasegawa M (1998) Mater Sci Eng A 243:14010.1016/S0921-5093(97)00791-0 ↗
12. Lindholm US, Yeakly LW (1968) Exp Mech 8:110.1007/BF02326244 ↗
13. Chiddister JL, Malvern LE (1963) Exp Mech 3:8110.1007/BF02325890 ↗
14. Lee WS, Lin CF (1998) Mater Sci Eng A 241:4810.1016/S0921-5093(97)00471-1 ↗
15. Ham RK (1961) Philos Mag 6:118310.1080/14786436108239679 ↗
16. Nishimura T, Nishigaki M, Moriguchi Y (1982) R&D Technical report, Kobe Steel, vol 32, p 52