journal article·2014-10

Dislocation junctions as indicators of elementary slip planes in body-centered cubic metals

K. Srivastava, D. Weygand, P. Gumbsch

Journal of Materials Science· Volume 49· Issue 20
Publisher page

Abstract

In body-centered cubic (bcc) metals, an unambiguous determination of the elementary slip planes remains difficult owing to several possible interpretations of the glide activity, of slip steps on the specimen surface or features of the dislocation microstructure. In this article, a method is proposed to determine the elementary slip planes in bcc metals based on the line directions of sessile junctions resulting from the interaction of mobile dislocations with $${a}/2\langle 111\rangle $$ Burgers vector. The proposed method allows to determine slip activity inside a material and not at its surface, where other effects may play a role. It is in principle applicable to determining the elementary slip plane in any crystalline material. Particularly, it may help to resolve a long-standing debate of the nature of the elementary slip planes in bcc metals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Non-Destructive Testing Techniques · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Schmid E (1924) Neuere Untersuchungen an Metallkristallen. In: Proceedings of the International Congress on Applied Mechanics, Delft, pp 342–353
2. Taylor GI, Elam CF (1926) The distortion of iron crystals. Proc R Soc A Lond 112:337–36110.1098/rspa.1926.0116 ↗
3. Taylor GI (1928) The deformation of crystals of β brass. Proc R Soc A Lond 118:1–2410.1098/rspa.1928.0032 ↗
4. Seeger A (2004) Experimental evidence for the {110} to {110} transformation of the screw-dislocation cores in body-centred cubic metals. Phys Status Solidi A 201(4):R21–R2410.1002/pssa.200409031 ↗
5. Seeger A (2002) Peierls barriers, kinks, and flow stress: recent progress. Z Metall 93:651–662
6. Weinberger CR, Boyce BL, Battaile CC (2013) Slip planes in bcc transition metals. Int Mater Rev 58(5):296–31410.1179/1743280412Y.0000000015 ↗
7. Kaun L, Luft A, Richter J, Schulze D (1968) Slip line pattern and active slip systems of tungsten and molybdenum single crystals weakly deformed in tension at room temperature. Phys Status Solidi 26:485–49910.1002/pssb.19680260212 ↗
8. Schadler HW (1960) Deformation behavior of zone-melted tungsten single crystals. Trans AMIE 218:649–655
9. Guiu F, Pratt PL (1966) The effect of orientation on the yielding and flow of molybdenum single crystals. Phys Status Solidi 15:539–55210.1002/pssb.19660150214 ↗
10. Werner M (1987) Temperature and strain-rate dependence of the flow stress of ultrapure tantalum single crystals. Phys Status Solidi A 104(63):63–7810.1002/pssa.2211040105 ↗
11. Duesbery MS, Foxall RA (1969) A detailed study of the deformation of high purity niobium single crystals. Phil Mag 20(166):719–75110.1080/14786436908228040 ↗
12. Nine HD (1972) Slip planes and asymmetric slip in fatigue of iron single crystals. Phil Mag 26(6):1409–141810.1080/14786437208220351 ↗
13. Luft A, Kaun L (1973) A detailed investigation of slip pline pattern and subsurface dislocation structure of molybdenum single crystals. Phys Status Solidi A 18:109–12210.1002/pssa.2210180107 ↗
14. Veselỳ (1968) The study of deformation of thin foils of Mo under the Electron Microscope. Phys Status Solidi 29:675–68310.1002/pssb.19680290217 ↗
15. Seeger A (1981) Kink theory of the flow stress of body-centered cubic metals. Z Metall 72:369–380
16. Seeger A (1995) The flow stress of high-purity refractory body-centred cubic metals and its modification by atomic defects. J Phys IV 5:45–65
17. Brunner D (2000) Comparison of flow-stress measurements on high-purity tungsten single crystals with the kink-pair theory. Mater Trans JIM 41(1):152–16010.2320/matertrans1989.41.152 ↗
18. Caillard D (2010) Kinetics of dislocations in pure Fe. Part I. In situ straining experiments at room temperature. Acta Mater 58:3493–350310.1016/j.actamat.2010.02.023 ↗
19. Marichal C, Van Swygenhoven H, Van Petegem S, Borca C (2013) {112} slip with {110} slip traces in bcc tungsten. Sci Rep 3(2547):1–7
20. Marichal C, Srivastava K, Weygand D, Van Petegem S, Grolimund P, Gumbsch P, Van Swygenhoven H (2014) Origin of anomalous slip in tungsten. Phys Rev Lett 113:02550110.1103/PhysRevLett.113.025501 ↗
21. Mrovec M, Nguyen-Manh D, Elsasser C, Gumbsch P (2012) Magnetic bond-order potential for Iron. Phys Rev Lett 106:24640210.1103/PhysRevLett.106.246402 ↗
22. Tang M, Kubin LP, Canova GR (1998) Dislocation mobility and the mechanical response of B.C.C. single crystals: a mesoscopic approach. Acta Mater 9:3221–323510.1016/S1359-6454(98)00006-8 ↗
23. Srivastava K, Groeger R, Weygand D, Gumbsch P (2013) Dislocation motion in tungsten: atomistic input to discrete dislocation simulations. Int J Plast 47:126–14210.1016/j.ijplas.2013.01.014 ↗
24. Hochrainer T, Zaiser M, Gumbsch P (2007) A three-dimensional continuum theory of dislocation systems: kinematics and mean field formulation. Phil Mag 87:1261–128210.1080/14786430600930218 ↗
25. Sandfeld S, Hochrainer T, Zaiser M, Gumbsch P (2011) Continuum modeling of dislocation plasticity: theory, numerical implementation and validation by discrete dislocation simulations. J Mater Res 26:623–63210.1557/jmr.2010.92 ↗
26. Hochrainer T, Sandfeld S, Zaiser M, Gumbsch P (2014) Continuum dislocation dynamics: towards a physical theory of crystal plasticity. JMPS 63:167–178
27. Ma A, Roters F, Raabe D (2007) A dislocation density based constitutive law for BCC materials in crystal plasticity FEM. Comp Mat Sci 39:91–9510.1016/j.commatsci.2006.04.014 ↗
28. Hamelin CJ, Diak BJ, Pilkey AK (2011) Multiscale modelling of the induced plastic anisotropy in bcc metals. Int J Plast 27:1185–120210.1016/j.ijplas.2011.01.003 ↗
29. Helm D, Butz A, Raabe D, Gumbsch P (2011) Microstructure-based description of the deformation of metals: theory and application. JOM 63:26–3310.1007/s11837-011-0056-8 ↗
30. Schroll R, Finnis MW, Gumbsch P (1998) Energies of defects in ordered alloys: dislocation core energies in NiAl. Acta Mater 46(3):919–92610.1016/S1359-6454(97)00304-2 ↗
31. Asaro RJ, Hirth JP, Barnett DM, Lothe J (1973) A further synthesis of sextic and integral theories for dislocations and line forces in anisotropic media. Phys Status Solidi A 60:261–27110.1002/pssb.2220600129 ↗
32. Hata S, Miyazaki H, Miyazaki S et al (2011) High-angle triple-axis specimen holder for three-dimensional diffraction contrast imaging in transmission electron microscopy. Ultramicroscopy 111(8):1168–117510.1016/j.ultramic.2011.03.021 ↗
33. Baird JD, Gale B (1965) Attractive dislocation intersections and work hardening in metals. Phil Trans R Soc A 257:553–59210.1098/rsta.1965.0015 ↗
34. Ohr SM, Beshers DN (1964) Crystallography of dislocations and dislocation loops in deformed iron. Phil Mag 10:219–23010.1080/14786436408225659 ↗
35. Luft A, Kaun L (1970) Electron microscopic investigation of the dislocation structure in molybdenum single crystals deformed in tension at 293 and 493 K. Phys Status Solidi 37:781–79310.1002/pssb.19700370229 ↗
36. Cheng GM et al (2013) Dislocations with edge components in nanocrystalline bcc Mo. J Mater Res 28(13):1820–182610.1557/jmr.2012.403 ↗
37. Christian JW (1983) Some surprising features of the plastic deformation of body-centered cubic metals and alloys. Metall Trans A 14:123710.1007/BF02664806 ↗