journal article·2015-12Open access

The effects of annealing on the microstructure and mechanical properties of Fe28Ni18Mn33Al21

Fanling Meng, Jingwen Qiu, Ian Baker, Hongbin Bei

Journal of Materials Science· Volume 50· Issue 23

Abstract

As-cast Fe28Ni18Mn33Al21, which consists of aligned, 50 nm, (Ni, Al)-rich B2, and (Fe, Mn)-rich f.c.c. phases, was annealed at a variety of temperatures up to 1423 K and the microstructure and mechanical properties were examined. It was shown that the as-cast microstructure arises from a eutectoid transformation at ~1300 K. Annealing at temperatures ≤1073 K produces β-Mn-structured precipitates and hardness values up to 816 HV, while annealing at temperatures >1073 K leads to dramatic coarsening of the two-phase B2/f.c.c. microstructure (up to 5.5 µm after 50 h at 1273 K), but does not lead to β-Mn precipitation. Interestingly, annealing at temperatures >1073 K delays the onset of β-Mn precipitation during subsequent anneals at lower temperatures. Coarsening the B2/f.c.c. lamellar structure by annealing at higher temperatures softens it and leads to increases in ductility from fracture before yield to ~8 % elongation. The presence of β-Mn precipitates makes the very fine, brittle B2/f.c.c. microstructures even more brittle, but significant ductility (8.4 % elongation) is possible even with β-Mn precipitates present if the B2/f.c.c. matrix is coarse and, hence, more ductile.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Baker I, Hanna JA, Wittmann MW, Munroe PR (2005) Microstructure of a spinodal Fe-Ni-Mn-Al alloy. Microsc Microanal 11(S02):1864–1865
2. Baker I, Wu H, Wu X, Miller MK, Munroe PR (2011) The microstructure of near-equiatomic B2/f.c.c. FeNiMnAl alloys. Mater Charact 62(10):952–95810.1016/j.matchar.2011.07.009 ↗
3. Baker I, Zheng RK, Saxey DW, Kuwano S, Wittmann MW, Loudis JA, Prasad KS, Liu Z, Marceau R, Munroe PR, Ringer SP (2009) Microstructural evolution of spinodally formed Fe35Ni15Mn25Al25. Intermetallics 17(11):886–89310.1016/j.intermet.2009.03.016 ↗
4. Hanna JA, Baker I, Wittmann MW, Munroe PR (2005) A new high-strength spinodal alloy. J Mater Res 20(04):791–79510.1557/JMR.2005.0136 ↗
5. Liao Y, Baker I (2008) Microstructure and room-temperature mechanical properties of Fe30Ni20Mn35Al15. Mater Charact 59(11):1546–154910.1016/j.matchar.2008.01.017 ↗
6. Liao Y, Baker I (2011) On the room-temperature deformation mechanisms of lamellar-structured Fe30Ni20Mn35Al15. Mater Sci Eng A 528(12):3998–400810.1016/j.msea.2011.01.089 ↗
7. Liao Y, Meng F, Baker I (2011) Environmental embrittlement of two-phase Fe30Ni20Mn35Al15. Intermetallics 19(10):1533–153710.1016/j.intermet.2011.05.023 ↗
8. Liao Y, Baker I (2011) Evolution of the microstructure and mechanical properties of eutectic Fe30Ni20Mn35Al15. J Mater Sci 46(7):2009–2017. doi: 10.1007/s10853-010-5197-610.1007/s10853-010-5197-6 ↗
9. Loudis JA, Baker I (2007) α- and β-Mn precipitates in the spinodal Fe30Ni20Mn25Al25 alloy. Philos Mag 87(35):5639–565610.1080/14786430701708372 ↗
10. Loudis JA, Baker I (2008) Dislocation identification and in situ straining in the spinodal Fe30Ni20Mn25Al25 alloy. Microsc Res Tech 71(7):489–49610.1002/jemt.20576 ↗
11. Meng F, Baker I, Munroe PR (2012) The effects of environment on the dry sliding wear of eutectic Fe30Ni20Mn35Al15. J Mater Sci 47(12):4827–4837. doi: 10.1007/s10853-012-6341-210.1007/s10853-012-6341-2 ↗
12. Wittmann MW, Baker I, Hanna JA, (2004) Microstructure and mechanical properties of Fe-Ni-Mn-Al alloys. In: MRS Online Proceedings Library, 84210.1557/PROC-842-S5.17 ↗
13. Kasper JS, Roberts BW (1956) Antiferromagnetic structure of α-manganese and a magnetic structure study of β-manganese. Phys Rev 101(2):537–54410.1103/PhysRev.101.537 ↗
14. Nakamura H, Yoshimoto K, Shiga M, Nishi M, Kakurai K (1997) Strong antiferromagnetic spin fluctuations and the quantum spin-liquid state in geometrically frustrated beta-Mn, and the transition to a spin-glass state caused by non-magnetic impurity. J Phys 9(22):4701
15. Loudis JA, Boyd TC, Coen DA, Baker I (2006) Microstructure and mechanical properties of an extruded Fe30Ni20Mn25Al25 alloy. In: MRS Online Proceedings Library, 98010.1557/PROC-980-0980-II01-02 ↗
16. Liu TF, Wu CC (1989) Beta-Mn structure in an Fe-Al-Mn-Cr alloy. Scr Metall 23(7):1087–109210.1016/0036-9748(89)90305-0 ↗
17. Lorimer GW, Nicholson RB (1966) Further results on the nucleation of precipitates in the Al-Zn-Mg system. Acta Metall Mater 14(8):1009–101310.1016/0001-6160(66)90229-X ↗
18. Guinier A (1938) Structure of age-hardened aluminium-copper alloys. Nature 142:569–57010.1038/142569b0 ↗
19. Preston GD (1938) Structure of age-hardened aluminium-copper alloys. Nature 142:569–57010.1038/142570a0 ↗
20. Embury JD, Nicholson RB (1956) The nucleation of precipitates: the system Al-Zn-Mg. Acta Metall Mater 13(4):403–41710.1016/0001-6160(65)90067-2 ↗
21. Sato T, Kojima Y, Takahashi T (1979) A study on the temperature limit for G.P. zone formation in Al-Zn alloys. Trans Jpn Inst Metals 20(9):475–48210.2320/matertrans1960.20.475 ↗
22. Inoue H, Sato T, Kojima Y, Takahashi T (1981) The temperature limit for GP zone formation in an Al-Zn-Mg alloy. Metall Trans A 12(8):1429–143410.1007/BF02643687 ↗
23. Dorward RC (1973) Preaging effects in Al-Mg-Si alloys containing 0.6 to 0.9 Pct Mg2Si. Metall Trans 4:507–51210.1007/BF02648703 ↗
24. Trotter G, Baker I (2015) The effect of aging on the microstructure and mechanical behavior of the alumina-forming austenitic stainless steel Fe-20Cr-30Ni-2Nb-5Al. Mater Sci Eng A 627(2015):270–27610.1016/j.msea.2014.12.072 ↗
25. Baker I, Meng F (2015) Lamellar coarsening in Fe28Ni18Mn33Al21 and its influence on room temperature tensile behavior. Acta Mater 95(2015):124–13110.1016/j.actamat.2015.05.006 ↗