journal article·2000-12

Effects of composition and sintering time on liquid phase sintered Co-Cu samples in microgravity

Yubin He, Saiyin Ye, J. Naser, J. Chiang, J. E. Smith

Journal of Materials Science· Volume 35· Issue 23
Publisher page

Abstract

Twelve Co-Cu powder compact samples with different liquid volume fractions were processed during microgravity liquid phase sintering on a suborbital sounding rocket and three Space Shuttle missions. The processing times ranged from 2.5 minutes to 66 minutes. The samples exhibited dimension stability after sintering. Microstructural evolutions such as densification, dihedral angle, contact per grain and grain growth rates, indicated a dependency on Cu composition and sintering time. Grain growth analysis showed a diffusion-controlled grain growth mechanism. The diffusional layer was found in a microgravity processed 70vol%Co-Cu sample. A mechanism that explains the transient nature of this diffusion layer is proposed and used to explain the results at other processing times. Agglomeration and coalescence of particles were observed in this study, and the grain size distributions were in agreement with LSEM model, which incorporates the effect of higher solid volume fraction and particle coalescence. Analysis of the samples also revealed considerable pore formation and metamorphosis. Unlike the Fe-Cu samples, in which pore breakup was found, pore filling and coarsening dominate in all Co-Cu samples. The evolution of these parameters has been used to enhance the understanding of driving forces that contribute to the pore metamorphosis during liquid phase sintering in the Co-Cu system under microgravity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Thermal and Kinetic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. R. M. German, “Liquid Phase Sintering” (Plenum Press, New York, 1985).10.1007/978-1-4899-3599-1 ↗
2. C. M. Kipphut, A. Bose, S. Farooq and R. M. German, Metallurgical Transactions A 19A (1988) 1905.10.1007/BF02645192 ↗
3. T. H. Courtney, Scripta Met. 35(5) (1996) 567.10.1016/1359-6462(96)00191-1 ↗
4. Z. Xue, Master thesis, University of Alabama in Huntsville, 1995.
5. Z. Xue, S. Noojin, J. G. Vandegrift and A. K. Kuruvilla, in “Experimental Methods for Microgravity Materials Science,” edited by Robert Schiffman (TMS Publications, 1996), in press.
6. Z. XUE, S. NOOJIN, J. G. VANDEGRIFT and A. K. KURUVILLA Idem., High Temperatures-High Pressures 29 (1997) 349.10.1068/htrt86 ↗
7. Z. Xue, J. G. Vandegrift and A. K. Kuruvilla, Mater. Trans., JIM 37 (1996) 1084.10.2320/matertrans1989.37.1084 ↗
8. Y. He, S. Ye, A. K. Kuruvilla and J. E. Smith Jr., in 9th International Symposium on Experimental Methods for Microgravity Materials Science, compiled and edited by Dr. Robert A. Schiffman, 1997, TMS publication (in CD-ROM format).
9. H. Park, S. Cho and D. Yoon, Metallurgical Transactions A. 15A (1984) 1075.10.1007/BF02644700 ↗
10. H. Park, O. Kwon and D. Yoon, ibid. 17A (1986) 1915.10.1007/BF02644989 ↗
11. C. Kang and D. Yoon, ibid. 12A (1981) 65.10.1007/BF02648509 ↗
12. S. Kang and D. Yoon, ibid. 13A (1982) 1405.10.1007/BF02642878 ↗
13. W. Bender and L. Ratke, Acta Mater. 46(4) (1998) 1125.10.1016/S1359-6454(97)00317-0 ↗
14. D. R. Lide (editor-in-chief), “CRC Handbook of Chemistry and Physics,” 72nd ed. (CRC Press, Boca Raton, Ann Arbor, Boston, 1991 1992).
15. S. P. Marsh and M. F. Glicksman, “Modeling of Coarsening and Grain Growth” (TMS Publication, 1992) p. 1.
16. I. Lifshitz and V. Slyozov, J. Phys. Chem. Solids 19 (1961) 35.10.1016/0022-3697(61)90054-3 ↗
17. C. Wagner, Z. Elektrochemie 65 (1961) 581.
18. R. M. German, Y. Liu and A. Griffo, Metall. Mater. Trans. 28A (1997) 215.10.1007/s11661-997-0098-2 ↗
19. Y. Masuda and R. Watanabe, in “Sintering Processes,” edited by G. C. Kuczynski (Plenum, Press, New York, 1979).
20. S. P. Marsh and C. S. Pande, “Modeling of Coarsening and Grain Growth” (TMS Publication, 1992).
21. I. Andersen, O. Grong and N. Ryum, Acta Metall.Mater. 43(7) (1995) 2689.10.1016/0956-7151(94)00489-5 ↗
22. J. G. Vandegrift, S. Noojin, K. Ryan and Z. Xue, in 7th International Symposium on Experimental Methods for Microgravity Materials Science, edited by R. Schiffman p. 79 (TMS Publications, 1995).
23. S. Noojin, Master thesis, University of Alabama in Huntsville, 1993.
24. S. Noojin, J. G. Vandegrift, K. Hartman and J. E. Smith, Jr., ASME Heat Transfer Div. Pub., Vol. HTD 259, p. 127, 1993.
25. R. M. German, “Powder Metallurgy Science” (Metal Powder Industries Federation, Princeton, New Jersey, 1984).
26. W. Ostwald, Z. Phys. Chem. 34 (1900) 495.10.1515/zpch-1900-3431 ↗
27. L. Ratke, “in Progr. Astronautics, Vol. 130: Low-Gravity Fluid Dynamics and Transport Phenomena,” edited by J. N. Koster and R. L. Sani (AIAA, Washingto, 1990) p. 661.
28. P. Voorhees, J. Statist. Phys. 38 (1985) 231.10.1007/BF01017860 ↗
29. S. S. Mani, R. M. German, Adv. In Powder Metal., 1 (1990) 453.
30. J. Naser, A. K. Kuruvilla and J. E. Smith, Jr., Journal of Materials Science 33 (1998) 5573.10.1023/A:1004403912910 ↗
31. S. Yang and R. M. German, Metallurgical Transactions A., 22A (1991) 786.10.1007/BF02670302 ↗
32. C. K. L. Davies, D. Nash and R. N. Stevens, Acta. Metal. 28 (1980) 179.10.1016/0001-6160(80)90067-X ↗
33. G. F. Froment and K. B. Bischoff, “Chemical Reactor Analysis and Design,” 2nd ed. (John Wiley & Sons, Inc., 1990).
34. J. Crank, “The Mathematics of Diffusion” (Oxford University Press, 1975).
35. H. S. Carslaw and J. C. Jaeger, “Conduction of Heat in Solids” (Oxford University Press, 1959).
36. D. B. Butrymowicz, J. R. Manning and M. E. Read, “Diffusion Rate Data and Mass Transport Phenomena for Copper Systems” (International Copper Research Association, Inc., 1977).