journal article·2023-01

In situ tensile test of selective laser melted Ti-6.5Al-2Zr-1Mo-1V alloy at different stages of martensite decomposition

Qian Wang, Meng Wang, Shuai Guo, Siyuan Tao, Junfeng Zhou, Zehao Qin, Xin Lin, Weidong Huang

Journal of Materials Science· Volume 58· Issue 4
Publisher page

Abstract

The morphology and microstructures of Ti-6.5Al-2Zr-1Mo-1V (TA15) samples at different stages of martensite decomposition fabricated by selective laser melting are characterized during the in situ tensile test, and the deformation and crack mechanisms are discussed. The results show that the as-deposited samples with full martensite structure, former being recognized as a state of poor plasticity, possess excellent ductility (with a maximum displacement of 0.74 mm) due to the cooperative deformation behavior of hierarchical martensites. The full-annealed sample, consisting of lamella (α + β) laths, also shows good ductility (0.65 mm) with the enhanced collaborative deformation behaviors between α and β laths. However, for samples with partially decomposed martensite structure, abrupt fracture after yielding was observed with deteriorated ductility (0.54 mm), as the slipping of dislocations is hampered by the dispersive nano-β precipitations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Donachie MJ (2000) Titanium: a technical guide, ASM international.10.31399/asm.tb.ttg2.9781627082693 ↗
2. H Attar M Calin LC Zhang S Scudino J Eckertb 2014 Manufacture by selective laser melting and mechanical behavior of commercially pure titanium Mater Sci Eng A 593 170 177 https://doi.org/10.1016/j.msea.2013.11.03810.1016/j.msea.2013.11.038 ↗
3. T Debroy HL Wei J Zuback 2018 Additive manufacturing of metallic components—process, structure and properties Prog Mater Sci 92 112 224 https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
4. JJ Lewandowski M Seifi 2016 Metal additive manufacturing: a review of mechanical properties Annu Rev Mater Res 46 151 186 https://doi.org/10.1146/annurev-matsci-070115-03202410.1146/annurev-matsci-070115-032024 ↗
5. H Shipley D McDonnell M Culleton R Coull R Lupoi G O'Donnell D Trimble 2018 Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review Int J Mach Tool Manuf 128 1 20 https://doi.org/10.1016/j.ijmachtools.2018.01.00310.1016/j.ijmachtools.2018.01.003 ↗
6. JP Oliveira TG Santos RM Miranda 2020 Revisiting fundamental welding concepts to improve additive manufacturing: from theory to practice Prog Mater Sci 107 100590https://doi.org/10.1016/j.pmatsci.2019.10059010.1016/j.pmatsci.2019.100590 ↗
7. YH Li X Cheng YC Guan 2021 Ultrafine microstructure development in laser polishing of selective laser melted Ti alloy J Mater Sci Tech 83 1 6 https://doi.org/10.1016/j.jmst.2020.12.05610.1016/j.jmst.2020.12.056 ↗
8. M Neikter A Huang X Wu 2019 Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V Int J Adv Manuf Tech 104 1381 1391 https://doi.org/10.1007/s00170-019-04002-810.1007/s00170-019-04002-8 ↗
9. Boyer R, Welsch G (1994) Materials properties handbook: titanium alloys, ASM international.
10. AA Antonysamy J Meyer PB Prangnell 2013 Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting Mater Charact 84 153 168 https://doi.org/10.1016/j.matchar.2013.07.01210.1016/j.matchar.2013.07.012 ↗
11. Kou S (2003) Welding metallurgy. 2nd ed. In: Wiley, Inc., Hoboken, 2003, pp. 37–64.10.1007/s11837-003-0137-4 ↗
12. E Boehm-Courjault F Gonzales A Jacot F Kohler A Mariaux C Niederberger MA Salgado-Ordorica M Rappaz 2009 EBSD: a powerful microstructure analysis technique in the field of solidification J Micros 233 160 169 https://doi.org/10.1111/j.1365-2818.2008.03107.x10.1111/j.1365-2818.2008.03107.x ↗
13. L Thijs F Verhaeghe T Cräghs JV Humbeeck J Kruth 2010 A study of the microstructural evolution during selective laser melting of Ti-6Al-4V Acta Mater 58 3303 3312 https://doi.org/10.1016/j.actamat.2010.02.00410.1016/j.actamat.2010.02.004 ↗
14. AT Xue X Lin LL Wang XF Lu HL Ding WD Huang 2021 Heat-affected coarsening of β grain in titanium alloy during laser directed energy deposition Scr Mater 205 114180https://doi.org/10.1016/j.scriptamat.2021.11418010.1016/j.scriptamat.2021.114180 ↗
15. P Kumar U Ramamurty 2019 Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti-6Al-4V alloy Acta Mater 169 45 59 https://doi.org/10.1016/j.actamat.2019.03.00310.1016/j.actamat.2019.03.003 ↗
16. T Wang YY Zhu SQ Zhang HB Tang HM Wang 2015 Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing J Alloys Compd 632 505 513 https://doi.org/10.1016/j.jallcom.2015.01.25610.1016/j.jallcom.2015.01.256 ↗
17. X Wu C Cai L Yang W Liu W Li M Li J Liu K Zhou YS Shi 2018 Enhanced mechanical properties of Ti-6Al-2Zr-1Mo-1V with ultrafine crystallites and nano-scale twins fabricated by selective laser melting Mater Sci Eng A 738 10 14 https://doi.org/10.1016/j.msea.2018.09.08710.1016/j.msea.2018.09.087 ↗
18. W Xu M Brandt S Sun J Elambasseril Q Liu K Latham K Xia M Qian 2015 Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition Acta Mater 85 74 84 https://doi.org/10.1016/j.actamat.2014.11.02810.1016/j.actamat.2014.11.028 ↗
19. P Edwards M Ramulu 2014 Fatigue performance evaluation of selective laser melted Ti-6Al-4V Mater Sci Eng A 598 327 337 https://doi.org/10.1016/j.msea.2014.01.04110.1016/j.msea.2014.01.041 ↗
20. H Matsumoto H Yoneda K Sato S Kurosu E Maire D Fabregue TJ Konno A Chiba AM Khorasani I Gibson A Ghaderi MI Mohammed 2019 Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts Int J Manuf Tech 101 3183 3197 https://doi.org/10.1007/s00170-018-3162-810.1007/s00170-018-3162-8 ↗
21. JJ Jiang ZH Ren ZB Ma T Zhang P Zhang DZ Zhang ZF Mao 2020 Mechanical properties and microstructural evolution of TA15 Ti alloy processed by selective laser melting before and after annealing Mater Sci Eng A 772 138742https://doi.org/10.1016/j.msea.2019.13874210.1016/j.msea.2019.138742 ↗
22. S Cao RK Chu XG Zhou K Yang QB Jia CS Lim AJ Huang XH Wu 2018 Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V J Alloys Compd 744 357 363 https://doi.org/10.1016/j.jallcom.2018.02.11110.1016/j.jallcom.2018.02.111 ↗
23. J Haubrich J Gussone P Barriobero-Vila P Kürnsteiner EA Jagle D Raabe N Schell G Requena 2019 The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V Acta Mater 167 136 148 https://doi.org/10.1016/j.actamat.2019.01.03910.1016/j.actamat.2019.01.039 ↗
24. C Cai X Wu W Liu W Zhu H Chen JCD Qiu CN Sun J Liu QS Wei YS Shi 2020 Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: parameter optimization, heat treatment and mechanical performance J Mater Sci Tech 57 51 64 https://doi.org/10.1016/j.jmst.2020.05.00410.1016/j.jmst.2020.05.004 ↗
25. WE King AT Anderson RM Ferencz NE Hodge C Kamath SA Khairallah A Rubenchik 2015 Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges Appl Phys Rev 2 041304https://doi.org/10.1063/1.493780910.1063/1.4937809 ↗
26. S Cao QD Hu AJ Huang ZE Chen M Sun JH Zhang CX Fu QB Jia CS Lim RR Boyer Y Yang XH Wu 2019 Static coarsening behaviour of lamellar microstructure in selective laser melted Ti-6Al-4V J Mater Sci Tech 35 1578 1586 https://doi.org/10.1016/j.jmst.2019.04.00810.1016/j.jmst.2019.04.008 ↗
27. A Zafari MR Barati K Xia 2019 Controlling martensitic decomposition during selective laser melting to achieve best ductility in high strength Ti-6Al-4V Mater Sci Eng A 744 445 455 https://doi.org/10.1016/j.msea.2018.12.04710.1016/j.msea.2018.12.047 ↗
28. A Zafari K Xia 2018 High Ductility in a fully martensitic microstructure: a paradox in a Ti alloy produced by selective laser melting Mater Res Lett 611 627 633 https://doi.org/10.1080/21663831.2018.152577310.1080/21663831.2018.1525773 ↗
29. P Kumar O Prakash U Ramamurty 2018 Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V Acta Mater 154 246 260 https://doi.org/10.1016/j.actamat.2018.05.04410.1016/j.actamat.2018.05.044 ↗
30. YM Ren X Lin X Fu H Tan J Chen WD Huang 2017 Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming Acta Mater 132 82 95 https://doi.org/10.1016/j.actamat.2017.04.02610.1016/j.actamat.2017.04.026 ↗
31. WS Li S Yamasaki M Mitsuhara H Nakashima 2020 In situ EBSD study of deformation behavior of primary α phase in a bimodal Ti-6Al-4V alloy during uniaxial tensile tests Mater Chara 163 110282https://doi.org/10.1016/j.matchar.2020.11028210.1016/j.matchar.2020.110282 ↗
32. W Wang TG Liu XY Cao YH Lu T Shoji 2017 In-situ observation on twin boundary evolution and crack initiation behavior during tensile test on 316L austenitic stainless steel Mater Charact 132 169 174 https://doi.org/10.1016/j.matchar.2017.08.02010.1016/j.matchar.2017.08.020 ↗
33. Z Guo S Malinov W Sha 2005 Modelling beta transus temperature of titanium alloys using artificial neural network Comput Mater Sci 32 1 12 https://doi.org/10.1016/j.commatsci.2004.05.00410.1016/j.commatsci.2004.05.004 ↗
34. IJ Beyerlein X Zhang A Misra 2014 Growth twins and deformation twins in metals Annu Rev Mater Res 44 329 363 https://doi.org/10.1146/annurev-matsci-070813-11330410.1146/annurev-matsci-070813-113304 ↗
35. K Edalati ZJ Horita 2011 High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness Acta Mater 59 6831 6836 https://doi.org/10.1016/j.actamat.2011.07.04610.1016/j.actamat.2011.07.046 ↗
36. MA Meyers O Vohringer VA Lubarda 2001 The onset of twinning in metals: a constitutive descripton Acta Mater 49 4025 4039 https://doi.org/10.1016/S1359-6454(01)00300-710.1016/S1359-6454(01)00300-7 ↗
37. PG Partridge 1967 The crystallography and deformation modes of hexagonal close-packed metals Metall Rev 12 1 169 194 https://doi.org/10.1179/mtlr.1967.12.1.16910.1179/mtlr.1967.12.1.169 ↗
38. D Mercier C Zambaldi TR Bieler 2015 A Matlab toolbox to analyze slip transfer through grain boundaries IOP Conf Ser: Mater Sci Eng 82 012090 https://doi.org/10.13140/2.1.3978.176610.13140/2.1.3978.1766 ↗
39. D Mercier C Zambaldi TR Bieler 2015 STABiX Documentation https://doi.org/10.13140/RG.2.2.25845.83687/210.13140/RG.2.2.25845.83687/2 ↗
40. J Yang C Liu P Ma L Chen L Zhan N Yan 2022 Superposed hardening from precipitates and dislocations enhances strength-ductility balance in Al-Cu alloy Int J Plast 158 103413https://doi.org/10.1016/j.ijplas.2022.10341310.1016/j.ijplas.2022.103413 ↗
41. SD Antolovich RW Armstrong 2014 Plastic strain localization in metals: origins and consequences Prog Mater Sci 59 1 60 https://doi.org/10.1016/j.pmatsci.2013.06.00110.1016/j.pmatsci.2013.06.001 ↗