Sulphidation and oxidation of the Ni22Cr10Al1Y alloy in H2/H2S and SO2 atmospheres at high temperatures
Source abstract
Abstract
The Ni22Cr10Al1Y alloy was exposed in H2/H2S gas mixture under the sulphur pressure 10−3 and 1 Pa as well as in SO2 at 1173 and 1273 K. At ps = 1 Pa the sulphidation rate was relatively high and the reaction obeyed the linear rate law. Under these conditions a nickel/nickel sulphide eutectic was formed. At ps = 10−3 Pa nickel sulphides became unstable and the sulphidation rate was significantly lower. The reaction obeyed the parabolic rate law. The oxidation rate of the alloy in SO2 was lower than that in any of the H2/H2S atmospheres. The sulphide scales formed during sulphidation in H2/H2S had complex microstructures and compositions, with sulphospinel and sulphide phases being present, e.g. NiCr2S4, Ni3S2, CrxSy. As the temperature increased and the sulphur pressure decreased, these phases were replaced by the chromium-rich sulphide phase. Various oxides formed during oxidation of the alloy in SO2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. F. J. Pennesi and D. K. Gupta, Thin Solid Films 84 (1981) 49.10.1016/0040-6090(81)90009-2 ↗
2. S. J. Shaffer, D. H. Boone, R. T. Lambertson and D. Peacock, ibid. 107 (1983) 463.10.1016/0040-6090(83)90308-5 ↗
3. M. Frances, M. Vilasi, M. Mansour-gabr, J. Steinmetz and P. Steinmetz, Mat. Sci. Eng. 88 (1987) 89.10.1016/0025-5416(87)90071-1 ↗
4. E. Godlewska, E. Roszczynialska and Z. Żurek, High Temp. Mat. Proces. 13 (1994) 259.10.1515/HTMP.1994.13.3.259 ↗
5. J. Gawel and A. Wyczesany, Corr. Sci. 28 (1988) 867.10.1016/0010-938X(88)90035-2 ↗
6. S. Mrowec and T. Werber, in “Korozja Gazowa Metali” (Wydawnictwo “Śląsk”, 1975) p. 425.
7. J. Gilewicz-wolter, Zeszyty Naukowe AGH 22 (1990) 56.
8. Z. Żurek, J. Thermal Anal. 39 (1993) 15.10.1007/BF02235442 ↗
9. T. Narita and T. Ishikawa, Mater. Sci. Eng. A120 (1989) 31.10.1016/0921-5093(89)90715-6 ↗
10. E. Godlewska, E. Roszczynialska and Z. Żurek, Werkstoffe u. Korrosion 45 (1994) 341.10.1002/maco.19940450604 ↗
11. E. Godlewska, E. Roszczynialska, A. Rakowska, S. Mrowec and Z. Żurek, Solid State Phen. 41 (1995) 205.10.4028/www.scientific.net/SSP.41.205 ↗
12. K. Godlewski, E. Godlewska, S. Mrowec and M. Danielewski, Mater. Sci. Eng. A120 (1989) 31.
13. Z. Żurek and J. Gawel,J. Phys. IV, Coll. 9, suppl. au J. Phys. III 3 (1993) 327.
14. C. S. Giggins and F. S. Pettit, Trans. Metall. Soc. AIME 245 (1969) 2495.
15. T. Hodgkiess, G. C. Wood, D. P. Whittle and B. D. Bastow, Oxid. Met. 14 (1980) 85.10.1007/BF00604568 ↗
16. J. Stringer, B. A. Wilcox and R. I. Jaffee, ibid. 5 (1972) 11.10.1007/BF00614617 ↗
17. H. T. Michels, Met. Trans. 7A (1976) 379.10.1007/BF02642834 ↗
18. J. D. Kuenzly and D. L. Douglass, Oxid. Met. 8 (1974) 139.10.1007/BF00612170 ↗
19. A. Kumar, M. Nasrallah and D. L. Douglass, ibid. 8 (1974) 227.10.1007/BF00604042 ↗
20. C. S. Giggins and F. S. Pettit, in Report ARL 75-0234 (Pratt and Whitney Aircraft, Connecticut, 1975).
21. W. J. Brindley and R. A. Miller, Surf. Coat. Technol. 43/44 (1990) 446.10.1016/0257-8972(90)90096-U ↗
22. P. Choquet, C. Indrigo and R. Mevrel, Mat. Sci. Eng. 88 (1987) 97.10.1016/0025-5416(87)90072-3 ↗
23. M. Tawancy, N. M. Abbas and A. Bennett, Surf. Coat. Technol. 68/69 (1994) 10.10.1016/0257-8972(94)90130-9 ↗
24. J. Musil and P. Fiala, Surf. Coat. Technol. 52 (1992) 211.10.1016/0257-8972(92)90018-6 ↗
25. S. Mrowec and T. Werber, in “Korozja Gazowa Metali” (Wydawnictwo “Śląsk”, 1975) p. 448.