journal article·2021-03

Inkjet printed patterns of polyamidoamine dendrimer functionalized magnetic nanostructures for future biosensing device application

Priyal Chikhaliwala, Wayne Schlegel, Heinrich Lang, Sudeshna Chandra

Journal of Materials Science· Volume 56· Issue 9
Publisher page

Abstract

Inkjet printing technology holds a great potential for fabrication of biosensor device. An optimized programmed printing makes the processing steps easier on a variety of substrates at low cost. The drop-on-demand piezoelectric mode of printing can construct a design pattern with low volume of material at specified position onto a suitable substrate. But to achieve this successfully, a formation of stable ink suspension remains the most challenging task. In recent times, nanoparticles are considered to pave a way for miniaturization of biosensing devices. Thus, we synthesized, characterized and investigated the stability of magnetic Fe3O4 nanoparticles stabilized by the polyamidoamine (PAMAM = N(CH2CH2C(O)NHCH2CH2NH2)(CH2CH2N(CH2CH2C(O)NHCH2CH2NH2)2)2) dendrimer (PAMAM@Fe3O4). A best stable ink dispersion of PAMAM@Fe3O4 nanoparticles was obtained in a solvent mixture of 70% ethylene glycol and 30% distilled water. The nanoparticle ink with surface tension of 57.47 mN/m and viscosity of 5.45 mPa/s formed a narrow and uniform printed pattern onto graphene paper. Further, as a model protein for future biosensing application, antibody against alpha-fetoprotein was conjugated onto the dendritic surface and printed onto graphene paper. The characterization of the printed pattern by TEM revealed spherical morphology, whereas SEM provided evidence of difference in printed line width and spacing of nanoparticles and antibody conjugated nanoparticles. As a proof-of-concept, the study demonstrated a printable ink dispersion based on PAMAM@Fe3O4 nanoparticles for future miniaturization of biosensing steps on a chip-based platform.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Gold and Silver Nanoparticles Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Sidorenko A, Hahn H (2020) Functional nanostructures and sensors for CBRN defence and environmental safety and security. Springer Nat. https://doi.org/10.1007/978-94-024-1909-210.1007/978-94-024-1909-2 ↗
2. Li J, Rossignol F, Macdonald J (2015) Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing. Lab Chip 15:2538–2558. https://doi.org/10.1039/C5LC00235D10.1039/C5LC00235D ↗
3. Zarei M (2017) Portable biosensing devices for point-of-care diagnostics: recent developments and applications. TrAC-Trend Anal Chem 91:26–41. https://doi.org/10.1016/j.trac.2017.04.00110.1016/j.trac.2017.04.001 ↗
4. Metters JP, Kadara RO, Banks CE (2011) New directions in screen printed electroanalytical sensors: an overview of recent developments. Analyst 136:1067–1076. https://doi.org/10.1039/C0AN00894J10.1039/C0AN00894J ↗
5. Taleat Z, Khoshroo A, Mazloum-Ardakani M (2014) Screen-printed electrodes for biosensing: a review (2008–2013). Microchim Acta 181:865–891. https://doi.org/10.1007/s00604-014-1181-110.1007/s00604-014-1181-1 ↗
6. Kadara RO, Jenkinson N, Banks CE (2009) Characterization and fabrication of disposable screen printed microelectrodes. Electrochem commun 11:1377–1380. https://doi.org/10.1016/j.elecom.2009.05.01010.1016/j.elecom.2009.05.010 ↗
7. Hyun WJ, Lim S, Ahn BY, Lewis JA, Frisbie CD, Francis LF (2015) Screen printing of highly loaded silver inks on plastic substrates using silicon stencils. ACS Appl Mater Interfaces 7:12619–12624. https://doi.org/10.1021/acsami.5b0248710.1021/acsami.5b02487 ↗
8. Singh M, Haverinen HM, Dhagat P, Jabbour GE (2010) Inkjet printing-process and its applications. Adv Mater 22:673–685. https://doi.org/10.1002/adma.20090114110.1002/adma.200901141 ↗
9. De-Gans BJ, Duineveld PC, Schubert US (2004) Inkjet printing of polymers: state of the art and future developments. Adv Mater 16:203–213. https://doi.org/10.1002/adma.20030038510.1002/adma.200300385 ↗
10. Calvert P (2001) Inkjet printing for materials and devices. Chem Mater 13:3299–3305. https://doi.org/10.1021/cm010163210.1021/cm0101632 ↗
11. Ning H, Tao R, Fang Z, Cei W, Chen J, Zhou Y et al (2017) Direct patterning of silver electrodes with 2.4 µm channel length by piezoelectric inkjet printing. J Colloid Interface Sci 487:68–72. https://doi.org/10.1016/j.jcis.2016.10.01610.1016/j.jcis.2016.10.016 ↗
12. Hasenbank MS, Edwards T, Fu E, Garzon R, Kosar TF, Look M et al (2008) Demonstartion of multi-analyte patterning using piezoelectric inkjet printing of multiple layers. Anal Chim Acta 611:80–88. https://doi.org/10.1016/j.aca.2008.01.04810.1016/j.aca.2008.01.048 ↗
13. Raut NC, Shamery K (2018) Inkjet printing metals on flexible materials for plastic and paper electronics. J. Mater Chem C 6:1618–1641. https://doi.org/10.1039/C7TC04804A10.1039/C7TC04804A ↗
14. Dankoco MD, Tesfay GY, Benevent E, Bendahan M (2016) Temperature sensor realized by inkjet printing process on flexible substrate. Mat Sci Eng B 205:1–5. https://doi.org/10.1016/j.mseb.2015.11.00310.1016/j.mseb.2015.11.003 ↗
15. Hoppmann EP, Yu WW, White IM (2013) Highly sensitive and flexible inkjet printed SERS sensors on paper. Methods 63:219–224. https://doi.org/10.1016/j.ymeth.2013.07.01010.1016/j.ymeth.2013.07.010 ↗
16. Xu C, Huang Y, Fu J, Markwald RR (2014) Electric field-assisted droplet formation using piezoactuation-based drop-on demand inkjet printing. J Micromech Microeng 24:1–9. https://doi.org/10.1088/0960-1317/24/11/11501110.1088/0960-1317/24/11/115011 ↗
17. Scandurra A, Indelli GF, Sparta NG, Galliano F, Ravesi S, Pignataro S (2010) Low-temperature sintered conductive silver patterns obtained by inkjet printing for plastic electronics. Surf Interface Anal 42:1163–1167. https://doi.org/10.1002/sia.322910.1002/sia.3229 ↗
18. Ji A, Chen Y, Wang X (2018) Xu C Inkjet printed flexible electronics on paper substrate with reduced graphene oxide/carbon black ink. J Mater Sci: Mater Electron 29:13032–13042. https://doi.org/10.1007/s10854-018-9425-110.1007/s10854-018-9425-1 ↗
19. Novara C, Petracca F, Virga A, Rivolo P, Ferrero S, Chiolerio A et al (2014) SERS active silver nanoparticles synthesized by inkjet printing on mesoporous silicon. Nanoscale Res Lett 9:1–7. https://doi.org/10.1186/1556-276X-9-52710.1186/1556-276X-9-527 ↗
20. Nie X, Wang H, Zou J (2012) Inkjet printing of silver citrate conductive ink on PET substrate. Appl Sur Sci 261:554–560. https://doi.org/10.1016/j.apsusc.2012.08.05410.1016/j.apsusc.2012.08.054 ↗
21. Jeong S, Song H, Lee W, Choi Y, Ryu B-H (2010) Preparation of aqueous Ag ink with long-term dispersion stability and its inkjet printing for fabricating conductive tracks on a polyimide film. J Appl Phys 108:1–5. https://doi.org/10.1063/1.351168610.1063/1.3511686 ↗
22. Kosmala A, Wright R, Zhang Q, Kirby P (2011) Synthesis of silver nano particles and fabrication of aqueous Ag inks for inkjet printing. Mater Chem Phys 129:1075–1080. https://doi.org/10.1016/j.matchemphys.2011.05.06410.1016/j.matchemphys.2011.05.064 ↗
23. Wu J-T, Lien-Chung S, Tsai M-H, Hwang W-S (2011) Inkjet printing of low-temperature cured silver patterns by using AgNO3/1-dimethylamino-2-propanol inks on polymer substrates. J Phys Chem C 115:10940–10945. https://doi.org/10.1021/jp200972y10.1021/jp200972y ↗
24. Lee H-H, Chou K-S, Huang K-C (2005) Inkjet printing of nanosized silver colloids. Nanotechnology 16:2436–2441. https://doi.org/10.1088/0957-4484/16/10/07410.1088/0957-4484/16/10/074 ↗
25. Bishop PT, Ashfield LJ, Berzins A, Boardman A, Buche V, Cookson J et al (2010) Printed gold for electronic applications. Gold Bulletin 43:181–188. https://doi.org/10.1007/BF0321498510.1007/BF03214985 ↗
26. Kang JS, Kim HS, Ryu J, Hahn HT, Jang S, Joung JW (2010) Inkjet printed electronics using copper nanoparticle ink. J Mater Sci: Mater Electron 21:1213–1220. https://doi.org/10.1007/s10854-009-0049-310.1007/s10854-009-0049-3 ↗
27. Tortorich RP, Choi J-W (2013) Inkjet printing of carbon nanotubes. Nanomaterials 3:453–468. https://doi.org/10.3390/nano303045310.3390/nano3030453 ↗
28. Secor EB, Prabhumirashi PL, Puntambekar K, Geier ML, Hersam MC (2013) Inkjet printing of high conductivity, flexible graphene patterns. J Phys Chem Lett 4:1347–1351. https://doi.org/10.1021/jz400644c10.1021/jz400644c ↗
29. Li J, Ye F, Vaziri S, Muhammed M, Lemme MC, Ostling M (2013) Efficient inkjet printing of graphene. Adv Mater 25:3985–3992. https://doi.org/10.1002/adma.20130036110.1002/adma.201300361 ↗
30. Giardi R, Porro S, Chiolerio A, Celasco E, Sangermano M (2013) Inkjet printed acrylic formulations based on UV-reduced graphene oxide nanocomposites. J Mater Sci 48:1249–1255. https://doi.org/10.1007/s10853-012-6866-410.1007/s10853-012-6866-4 ↗
31. Lim S, Kang B, Kwak D, Lee WH, Lim JA, Cho K (2012) Inkjet-printed reduced graphene oxide/poly(vinyl alcohol) composite electrodes for flexible transparent organic field-effect transistors. J Phys Chem C 116:7520–7525. https://doi.org/10.1021/jp203441e10.1021/jp203441e ↗
32. Song E, Costa T, Choi J-W (2017) A chemiresistive glucose sensor fabricated by inkjet printing. Microsyst Technol 23:3505–3511. https://doi.org/10.1007/s00542-016-3160-410.1007/s00542-016-3160-4 ↗
33. Mitra D, Zubkova T, Gerlach C, Kanoun O, Miesel D, Lang H et al (2018) Inkjet printing and intense pulsed light sintering of multiwall carbon nanotubes for sensor applications. J Imaging Sci Techn 62:1–5. https://doi.org/10.2352/J.ImagingSci.Technol.2018.62.4.04040910.2352/J.ImagingSci.Technol.2018.62.4.040409 ↗
34. Carvajal S, Fera SN, Jones AL, Baldo TA, Mosa IM, Rusling JF (2018) Disposable inkjet-printed electrochemical platform for detection of clinically relevant HER-2 breast cancer biomarker. Biosens Bioelectron 104:158–162. https://doi.org/10.1016/j.bios.2018.01.00310.1016/j.bios.2018.01.003 ↗
35. Jahn SF, Blaudeck T, Baumann RR, Jakob A, Ecorchard P, Ruffer T et al (2010) Inkjet printing of conductive silver patterns by using the first aqueous particle-free MOD ink without additional stabilizing ligands. Chem Mater 22:3067–3071. https://doi.org/10.1021/cm903642810.1021/cm9036428 ↗
36. Jahn SF, Jakob A, Blaudeck T, Schimdt P, Lang H, Baumann RR (2010) Inkjet printing of conductive patterns with an aqueous solution of [AgO2C(CH2OCH2)3H] without any additional stabilizing ligands. Thin Solid Films 518:3218–3222. https://doi.org/10.1016/j.tsf.2010.01.03010.1016/j.tsf.2010.01.030 ↗
37. Adner D, Wolf FM, Mockel S, Perelaer J, Schubert US, Lang H (2014) Copper(II) ethylene glycol carboxylates as precursors for inkjet printing of conductive copper patterns. Thin Solid Films 565:143–148. https://doi.org/10.1016/j.tsf.2014.06.05410.1016/j.tsf.2014.06.054 ↗
38. Schoner C, Tuchscherer A, Blaudeck T, Jahn SF, Baumann RR, Lang H (2013) Particle-free gold metal-organic decomposition ink for inkjet printing of gold structures. Thin Solid Films 531:147–151. https://doi.org/10.1016/j.tsf.2013.01.02710.1016/j.tsf.2013.01.027 ↗
39. Holzinger M, Goff AL, Cosnier S (2014) Nanomaterials for biosensing applications: a review. Front Chem 2:1–10. https://doi.org/10.3389/fchem.2014.0006310.3389/fchem.2014.00063 ↗
40. Chikhaliwala P, Rai R, Chandra S (2019) Simultaneous voltametric immunodetection of alpha-fetoprotein and glypican-3 using a glassy carbon electrode modified with magnetite-conjugated dendrimers. Microchim Acta 186:1–12. https://doi.org/10.1007/s00604-019-3354-410.1007/s00604-019-3354-4 ↗
41. Chikhaliwala P, Chandra S (2020) Poly-amidoamine dendrimers@Fe3O4 based Electrochemiluminescent nanomaterials for biosensing of liver cancer biomarkers. Electroanalysis 32:1–12. https://doi.org/10.1002/elan.20206007510.1002/elan.202060075 ↗
42. Lou J, Zhang L, Lv S, Zhang C, Jiang S (2017) Biomarkers for hepatocellular carcinoma. Biomark. Cancer 9:1–9. https://doi.org/10.1177/1179299X1668464010.1177/1179299X16684640 ↗
43. Teja AS, Koh PY (2009) Synthesis, properties, and applications of magnetic iron oxide nanoparticles. Prog Cryst Growth Charact Mater 55:22–45. https://doi.org/10.1016/j.pcrysgrow.2008.08.00310.1016/j.pcrysgrow.2008.08.003 ↗
44. Bandyopadhyay M, Dattagupta S (2006) Memory in nanomagnetic systems: superparamagnetism versus spin-glass behavior. Phys Rev B 74:1–7. https://doi.org/10.1103/PhysRevB.74.21441010.1103/PhysRevB.74.214410 ↗
45. Dietrich S, Chandra S, Georgi C, Thomas S, Makarov D, Schulze S et al (2012) Design, characterization and magnetic properties of Fe3O4-nanoparticle arrays coated with PEGylated-dendrimers. Mater Chem Phys 132:292–299. https://doi.org/10.1016/j.matchemphys.2011.11.01510.1016/j.matchemphys.2011.11.015 ↗
46. Chandra S, Patel MD, Lang H, Bahadur D (2015) Dendrimer-functionalized magnetic nanoparticles: a new electrode material for electrochemical energy storage devices. J Power Sour 280:217–226. https://doi.org/10.1016/j.jpowsour.2015.01.07510.1016/j.jpowsour.2015.01.075 ↗
47. Migneault I, Dartiguenave C, Bertrand MJ, Waldron KC (2004) Glutaraldehyde: behavior in aqueous solution, reaction with proteins, and application to enzyme crosslinking. BioTechniques 37:798–802. https://doi.org/10.2144/04375rv0110.2144/04375rv01 ↗
48. Pietrikova A, Lukacs P, Jakubeczyova D, Ballokova B (2016) Surface analysis of polymeric substrates used for inkjet printing technology. Circuit World 42:9–16. https://doi.org/10.1108/CW-10-2015-004710.1108/CW-10-2015-0047 ↗
49. Lau E, Carvalho L, Pereira A, Montanha G, Correa C, Carvalho H et al (2020) Localization of coated iron oxide (Fe3O4) nanoparticles on tomato seeds and their effects on growth. ACS Appl Bio Mater 3:4109–4117. https://doi.org/10.1021/acsabm.0c0021610.1021/acsabm.0c00216 ↗
50. Nene A, Takahashi M, Somani P (2016) Fe3O4 and Fe nanoparticles by chemical reduction of Fe(acac)3 by ascorbic acid: role of water. World J Nanosci Eng 6:20–28. https://doi.org/10.4236/wjnse.2016.6100210.4236/wjnse.2016.61002 ↗
51. Wu H, Gao G, Zhou X, Zhang Y, Guo S (2012) Control on the formation of Fe3O4 nanoparticles on chemically reduced graphene oxide surfaces. CrystEngComm 14:499–504. https://doi.org/10.1039/C1CE05724C10.1039/C1CE05724C ↗
52. Eltouny N, Ariya P (2014) Competing reactions of selected atmospheric gases on Fe3O4 nanoparticles surfaces. Phys Chem Chem Phys 16:23056–23066. https://doi.org/10.1039/C4CP02379J10.1039/C4CP02379J ↗
53. Zhou X, Chen Z, Yan D, Lu H (2012) Deposition of Fe-Ni nanoparticles on polyethyleneimine-decorated graphene oxide and application in catalytic dehydrogenation of ammonia borane. J Mater Chem 22:13506–13516. https://doi.org/10.1039/C2JM31000G10.1039/C2JM31000G ↗
54. Schrader ME (1995) Young-dupre revisited. Langmuir 11:3585–3589. https://doi.org/10.1021/la00009a04910.1021/la00009a049 ↗
55. Ohlund T, Ortegren J, Forsberg S, Nilsson H-K (2012) Paper surfaces for metal nanoparticle inkjet printing. Appl Surf Sci 259:731–739. https://doi.org/10.1016/j.apsusc.2012.07.11210.1016/j.apsusc.2012.07.112 ↗
56. Chow TS (2007) Nanoscale surface roughness and particle adhesion on structured substrates. Nanotechnology 18:1–4. https://doi.org/10.1088/0957-4484/18/11/11571310.1088/0957-4484/18/11/115713 ↗
57. Brutin D, Starov V (2018) Recent advances in droplet wetting and evaporation. Chem Soc Rev 47:558–585. https://doi.org/10.1039/C6CS00902F10.1039/C6CS00902F ↗
58. Tai J, Gan HY, Liang Yn, Lok BK (2008) Control of droplet formation in inkjet printing using ohnesorge number category: materials and processes. 10th Electronics Packaging Technology Conference 761-766. Doi: https://doi.org/10.1109/EPTC.2008.476352410.1109/EPTC.2008.4763524 ↗
59. Stringer J, Derby B (2010) Formation and stability of lines produced by inkjet printing. Langmuir 26:10365–10372. https://doi.org/10.1021/la101296e10.1021/la101296e ↗
60. Soltman D, Subramanian V (2008) Inkjet-printed line morphologies and temperature control of the coffee ring effect. Langmuir 24:2224–2231. https://doi.org/10.1021/la702684710.1021/la7026847 ↗
61. Wang S, Zhang Y, Abidi N, Cabrales L (2009) Wettability and surface free energy of graphene films. Langmuir 25:11078–11081. https://doi.org/10.1021/la901402f10.1021/la901402f ↗
62. Chauhan N, Maekawa T, Kumar D (2017) Graphene based biosensors-accelerating medical diagnostics to new-dimensions. J Mater Res 32:2860–2882. https://doi.org/10.1557/jmr.2017.9110.1557/jmr.2017.91 ↗
63. Akazawa-Ogawa Y, Nagai H, Hagihara Y (2018) Heat denaturation of the antibody a multi-domain protein. Biophys Rev 10:255–258. https://doi.org/10.1007/s12551-017-0361-810.1007/s12551-017-0361-8 ↗
64. Petcharoen K, Sirivat A (2012) Synthesis and characterization of magnetite nanoparticles via the chemical co-precipitation method. Mat Sci Eng B 177:421–427. https://doi.org/10.1016/j.mseb.2012.01.00310.1016/j.mseb.2012.01.003 ↗