Surface precipitation of supersaturated solutes in a ternary Fe–Au–W alloy and its binary counterparts
Source abstract
Abstract
Abstract The precipitation of supersaturated solutes at free surfaces in ternary Fe–3Au–4W and binary Fe–3Au and Fe–4W alloys (composition in weight percentage) for different ageing times was investigated at a temperature of 700 °C. The time evolution of the surface precipitation is compared among the three alloys to investigate the interplay between the Au and W solutes in the ternary system. The Au-rich grain-interior surface precipitates show a similar size and kinetics in the Fe–Au–W and Fe–Au alloys, while the W-rich grain-interior surface precipitates show a smaller size and a higher number density in the Fe–Au–W alloy compared to the Fe–W alloy. The kinetics of the precipitation on the external free surface for the ternary Fe–Au–W alloy is compared to the previously studied precipitation on the internal surfaces of the grain-boundary cavities during creep loading of the same alloy. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Van der Zwaag S (2007) Self healing materials: an alternative approach to 20 centuries of materials science. Springer, Netherlands10.1007/978-1-4020-6250-6 ↗
2. Hager MD, Greil P, Leyens C, van der Zwaag S, Schubert US (2010) Self-healing materials. Adv Mater 22(47):5424–5430. https://doi.org/10.1002/adma.20100303610.1002/adma.201003036 ↗
3. Van Dijk NH, van der Zwaag S (2018) Self-healing phenomena in metals. Adv Mater Interfaces 5(17):1800226. https://doi.org/10.1002/admi.20180022610.1002/admi.201800226 ↗
4. Laha K, Kyono J, Kishimoto S, Shinya N (2005) Beneficial effect of B segregation on creep cavitation in a type 347 austenitic stainless steel. Scr Mater 52(7):675–678. https://doi.org/10.1016/j.scriptamat.2004.11.01610.1016/j.scriptamat.2004.11.016 ↗
5. Lumley RN, Morton AJ, Polmear IJ (2002) Enhanced creep performance in an Al-Cu-Mg-Ag alloy through underageing. Acta Mater 50:3597–3608. https://doi.org/10.1016/S1359-6454(02)00164-710.1016/S1359-6454(02)00164-7 ↗
6. Zhang S, Kwakernaak C, Sloof W, Brück E, van der Zwaag S, van Dijk NH (2015) Self healing of creep damage by gold precipitation in iron alloys. Adv Eng Mater 17(5):598–603. https://doi.org/10.1002/adem.20140051110.1002/adem.201400511 ↗
7. Zhang S, Kwakernaak C, Tichelaar FD, Sloof WG, Kuzmina M, Herbig M, Raabe D, Brück E, van der Zwaag S, van Dijk NH (2015) Autonomous repair mechanism of creep damage in Fe-Au and Fe-Au-B-N Alloys. Metall Mater Trans A 46(12):5656–5670. https://doi.org/10.1007/s11661-015-3169-910.1007/s11661-015-3169-9 ↗
8. Lumley RN, Polmear IJ (2007) Advances in self healing of metals. In: Paper presented at the Proceedings of the First International Conference on Self Healing Materials, Noordwijk aan Zee, Netherlands
9. Shinya N (2008) Self-healing of metallic materials: self-healing of creep cavity and fatigue cavity/crack. In: Ghosh SK (ed) Self-healing materials: fundamentals, design stragegies, and applications. Wiley, Hoboken, pp 219–25010.1002/9783527625376.ch7 ↗
10. Zhang S, Cizek J, Yao Z, Oleksandr M, Kong X, Liu C, van Dijk NH, van der Zwaag S (2019) Self healing of radiation-induced damage in Fe–Au and Fe–Cu alloys: combining positron annihilation spectroscopy with TEM and ab initio calculations. J Alloys Comp 817:152765. https://doi.org/10.1016/j.jallcom.2019.15276510.1016/j.jallcom.2019.152765 ↗
11. Laha K, Kyono J, Sasaki T, Kishimoto S, Shinya N (2005) Improved creep strength and creep ductility of type 347 austenitic stainless steel through the self-healing effect of boron for creep cavitation. Metall Mater Trans A 36a(2):399–409. https://doi.org/10.1007/s11661-005-0311-010.1007/s11661-005-0311-0 ↗
12. Fang H, Szymanski N, Versteylen CD, Cloetens P, Kwakernaak C, Sloof WG, Tichelaar FD, Balachandran S, Herbig M, Brück E, van der Zwaag S, van Dijk NH (2019) Self healing of creep damage in iron-based alloys by supersaturated tungsten. Acta Mater 166:531–542. https://doi.org/10.1016/j.actamat.2019.01.01410.1016/j.actamat.2019.01.014 ↗
13. Fang H, Versteylen CD, Zhang S, Yang Y, Cloetens P, Ngan-Tillard D, Brück E, van der Zwaag S, van Dijk NH (2016) Autonomous filling of creep cavities in Fe-Au alloys studied by synchrotron X-ray nano-tomography. Acta Mater 121:352–364. https://doi.org/10.1016/j.actamat.2016.09.02310.1016/j.actamat.2016.09.023 ↗
14. He SM, van Dijk NH, Schut H, Peekstok ER, van der Zwaag S (2010) Thermally activated precipitation at deformation-induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy. Phys Rev B 81(9):094103. https://doi.org/10.1103/PhysRevB.81.09410310.1103/PhysRevB.81.094103 ↗
15. van der Zwaag S, Brinkman E (2015) Self healing materials: pioneering research in the Netherlands. IOS Press, Amsterdam
16. Zhang S, Fang H, Gramsma ME, Kwakernaak C, Sloof WG, Tichelaar FD, Kuzmina M, Herbig M, Raabe D, Brück E, van der Zwaag S, van Dijk NH (2016) Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys. Metall Mater Trans A 47(10):4831–4844. https://doi.org/10.1007/s11661-016-3642-010.1007/s11661-016-3642-0 ↗
17. Fu Y, Kwakernaak C, Sloof WG, Tichelaar FD, Brück E, Van der Zwaag S, van Dijk NH (2020) Competitive healing of creep-induced damage in a ternary Fe-3Au-4W alloy. Metall Mater Trans A 51:4442–4455. https://doi.org/10.1007/s11661-020-05862-610.1007/s11661-020-05862-6 ↗
18. Sun WW, Fang H, van Dijk NH, van der Zwaag S, Hutchinson CR (2017) Linking surface precipitation in Fe-Au alloys to its self-healing potential during creep loading. Metall Mater Trans A 48(5):2109–2114. https://doi.org/10.1007/s11661-017-4025-x10.1007/s11661-017-4025-x ↗
19. Chen Y, Fang XY, Brechet Y, Hutchinson CR (2014) Surface precipitation on engineering alloys. Acta Mater 81:291–303. https://doi.org/10.1016/j.actamat.2014.08.04410.1016/j.actamat.2014.08.044 ↗
20. Vijayakumar H, Sriramamurthy AH, Nagender Naidu SV (1988) Calculated phase diagrams of Cu-W, Ag-W and Au-W binary systems. Calphad 12:177–184. https://doi.org/10.1016/0364-5916(87)90034-410.1016/0364-5916(87)90034-4 ↗
21. Zhang R-F, Shen Y-X, Kong L-T, Lai W-S, Liu B-X (2004) Metastable phase selection of an immiscible Au–W System studied by ab initio calculation, molecular dynamics simulation and ion-beam mixing. Jpn J Appl Phys 43:7648–7653. https://doi.org/10.1143/jjap.43.764810.1143/jjap.43.7648 ↗
22. Yamamoto K, Kimura Y, Mishima Y (2004) Orientation relationships of icosahedral quasicrystalline phase and Laves phase precipitates in a ferritic alloy. Mater Trans 45:2598–2601. https://doi.org/10.2320/matertrans.45.259810.2320/matertrans.45.2598 ↗
23. Versteylen CD, Szymański NK, Sluiter MHF, van Dijk NH (2018) Finite element modelling of creep cavity filling by solute diffusion. Philos Mag 98(10):864–877. https://doi.org/10.1080/14786435.2017.141809710.1080/14786435.2017.1418097 ↗
24. Jang J-W, Kwon J, Lee B-J (2010) Effect of stress on self-diffusion in bcc Fe: an atomistic simulation study. Scr Mater 63(1):39–42. https://doi.org/10.1016/j.scriptamat.2010.02.04510.1016/j.scriptamat.2010.02.045 ↗
25. Militzer M, Sun WP, Jonas JJ (1994) Modelling the effect of deformation-induced vacancies on segregation and precipitation. Acta Metall Mater 42(1):133–141. https://doi.org/10.1016/0956-7151(94)90056-610.1016/0956-7151(94)90056-6 ↗
26. Song SH, Chen XM, Weng LQ (2011) Solute diffusion during high-temperature plastic deformation in alloys. Mater Sci Eng A 528(24):7196–7199. https://doi.org/10.1016/j.msea.2011.06.01510.1016/j.msea.2011.06.015 ↗
27. Shima Y, Ishikawa Y, Nitta H, Yamazaki Y, Mimura K, Isshiki M, Iijima Y (2002) Self-diffusion along dislocations in ultra high purity iron. Mater Trans 43(2):173–177. https://doi.org/10.2320/matertrans.43.17310.2320/matertrans.43.173 ↗