journal article·2020-09

Fabrication of gradient multilayer polymer with improved damping performance based on poly(butyl acrylate)-grafted polysiloxane

Zeyuan Sheng, Jincheng Wang, Shiqiang Song

Journal of Materials Science· Volume 55· Issue 25
Publisher page

Abstract

A linear polysiloxane copolymer (PSI) was synthesized via hydrolysis of three siloxane monomers followed by hydrolytic condensation. Then, butyl acrylate monomers were used for grafting and cross-linking PSI copolymer under photoinitiation. The resulting poly(butyl acrylate)-grafted polysiloxane (PBA-g-PSI) exhibited different morphologies and microphase separation structures by varying the weight ratio of PSI and PBA. Inspired by the gradient structure of biological materials, a novel gradient multilayer polymer was prepared by assembling different PBA-g-PSI layers. The unique microstructure of gradient multilayer polymer and microphase separation of PSI showed enhanced damping performance such as high tan δmax and low damping temperatures. In addition, the thermal stability and thermo-mechanical property with damping mechanisms of these gradient multilayer polymers were also studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer composites and self-healing · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Lakes RS, Lee T, Bersie A, Wang YC (2001) Extreme damping in composite materials with negative-stiffness inclusions. Nature 410(6828):565–56710.1038/35069035 ↗
2. Suhr JW, Zhang W, Ajayan PM, Wang YC (2006) Temperature-activated interfacial friction damping in carbon nanotube polymer composites. Nano Lett 6(2):219–22310.1021/nl0521524 ↗
3. Zhang K, Chen T, Wang X, Fang J (2016) Rheology behavior and optimal damping effect of granular particles in a non-obstructive particle damper. J Sound Vib 364:30–4310.1016/j.jsv.2015.11.006 ↗
4. Zang L, Chen D, Cai Z, Peng J, Zhu M (2018) Preparation and damping properties of an organic–inorganic hybrid material based on nitrile rubber. Compos B 137:217–22410.1016/j.compositesb.2016.11.038 ↗
5. Sundararajan S, Kumar A, Chakraborty BC, Samui AB, Kulkarni PS (2018) Poly(ethylene glycol) (PEG)-modified epoxy phase-change polymer with dual properties of thermal storage and vibration damping. Sustain Energy Fuels 2(3):688–69710.1039/C7SE00552K ↗
6. Li Y, Lian Q, Lin Z, Cheng J, Zhang J (2017) Epoxy/polysiloxane intimate intermixing networks driven by intrinsic motive force to achieve ultralow-temperature damping properties. J Mater Chem A 5(33):17549–1756210.1039/C7TA04894G ↗
7. Wang D, Zhang H, Guo J, Cheng B, Cao Y, Lu S, Zhao N, Xu J (2016) Biomimetic gradient polymers with enhanced damping capacities. Macromol Rapid Commun 37(7):655–66110.1002/marc.201500637 ↗
8. Andjelkovic DD, Lu Y, Kessler MR, Larock RC (2009) Novel rubbers from the cationic copolymerization of soybean oils and dicyclopentadiene, 2-mechanical and damping properties. Macromol Mater Eng 294(8):472–48310.1002/mame.200900053 ↗
9. Wu JH, Li CH, Wu YT, Leu MT, Tsai Y (2010) Thermal resistance and dynamic damping properties of poly (styrene-butadiene-styrene)/thermoplastic polyurethane composites elastomer material. Compos Sci Technol 70(8):1258–126410.1016/j.compscitech.2010.03.014 ↗
10. Chen S, Wang Q, Wang T (2011) Damping, thermal, and mechanical properties of montmorillonite modified castor oil-based polyurethane/epoxy graft IPN composites. Mater Chem Phys 130(1–2):680–68410.1016/j.matchemphys.2011.07.044 ↗
11. Chu HH, Lee CM, Huang WG (2004) Damping of vinyl acetate-n-butyl acrylate copolymers. J Appl Polym Sci 91(3):1396–140310.1002/app.13266 ↗
12. Xia L, Li C, Zhang X, Wang J, Wu H, Guo S (2018) Effect of chain length of polyisobutylene oligomers on the molecular motion modes of butyl rubber: damping property. Polymer 141:70–7810.1016/j.polymer.2018.03.009 ↗
13. Urayama K, Miki T, Takigawa T, Kohjiya S (2004) Damping elastomer based on model irregular networks of end-linked poly(dimethylsiloxane). Chem Mater 16(1):173–17810.1021/cm0343507 ↗
14. Liu K, Lv Q, Hua J (2017) Study on damping properties of HVBR/EVM blends prepared by in situ polymerization. Polym Test 60:321–32510.1016/j.polymertesting.2017.02.026 ↗
15. Qiao B, Zhao X, Yue D, Zhang L, Wu S (2012) A combined experiment and molecular dynamics simulation study of hydrogen bonds and free volume in nitrile-butadiene rubber/hindered phenol damping mixtures. J Mater Chem 22(24):12339–1234810.1039/c2jm31716h ↗
16. Suresh S (2001) Graded materials for resistance to contact deformation and damage. Science 292(5526):2447–245110.1126/science.1059716 ↗
17. Claussen KU, Scheibel T, Schmidt HW, Giesa R (2012) Polymer gradient materials: can nature teach us new tricks. Macromol Mater Eng 297(10):938–95710.1002/mame.201200032 ↗
18. Wang YQ, Wang Y, Zhang HF, Zhang LQ (2006) A novel approach to prepare a gradient polymer with a wide damping temperature range by in-situ chemical modification of rubber during vulcanization. Macromol Rapid Commun 27(14):1162–116710.1002/marc.200600106 ↗
19. Karpiak JV, Ner Y, Almutairi A (2012) Density gradient multilayer polymerization for creating complex tissue. Adv Mater 24(11):1466–147010.1002/adma.201103501 ↗
20. Pakjamsai C, Kawakami Y (2004) Tendency of loop formation of oligosilsesquioxanes obtained from (4-substituted phenyl)trimethoxysilane catalyzed by benzyltrimethylammonium hydroxide in benzene. Polym J 36(6):455–46410.1295/polymj.36.455 ↗
21. Zhou Y, Fan M (2017) Recycled tyre rubber-thermoplastic composites through interface optimisation. RSC Adv 7(47):29263–2927010.1039/C7RA04925K ↗
22. Liu J, Scott C, Winroth S, Maia J, Ishida H (2015) Copolymers based on telechelic benzoxazine with a reactive main-chain and anhydride: monomer and polymer synthesis and thermal and mechanical properties of carbon fiber composites. RSC Adv 5(22):16785–1679110.1039/C4RA12086H ↗
23. Qi Z, Zhang W, He X, Yang R (2016) High-efficiency flame retardency of epoxy resin composites with perfect T8 caged phosphorus containing polyhedral oligomeric silsesquioxanes (P-POSSs). Compos Sci Technol 127:8–1910.1016/j.compscitech.2016.02.026 ↗
24. Wu TY, Lai XJ, Liu FJ, Li HQ, Zeng XR (2018) Efficiently enhancing the tracking and erosion resistance of silicone rubber by the synergism of fluorine-containing polyphenylsilsesquioxane and ureido-containing MQ silicone resin. Appl Surf Sci 459:483–49110.1016/j.apsusc.2018.08.021 ↗
25. Song SQ, Zhang Y (2017) Carbon nanotube/reduced graphene oxide hybrid for simultaneously enhancing the thermal conductivity and mechanical properties of styrene-butadiene rubber. Carbon 123:158–16710.1016/j.carbon.2017.07.057 ↗
26. Chen B, Ma N, Bai X, Zhang H, Zhang Y (2012) Effects of graphene oxide on surface energy, mechanical, damping and thermal properties of ethylene-propylene-diene rubber/petroleum resin blends. RSC Adv 2(11):4683–468910.1039/c2ra01212j ↗
27. Gao Y, Wang X, Liu M, Xi X, Zhang X, Jia D (2014) Effect of montmorillonite on carboxylated styrene butadiene rubber/hindered phenol damping material with improved extraction resistance. Mater Des 58:316–32310.1016/j.matdes.2014.01.070 ↗
28. Chern YC, Tseng SM, Hsieh KH (1999) Damping properties of interpenetrating polymer networks of polyurethane-modified epoxy and polyurethanes. J Appl Polym Sci 74(2):328–33510.1002/(SICI)1097-4628(19991010)74:2<328::AID-APP14>3.0.CO;2-W ↗
29. Mok MM, Kim J, Torkelson JM (2008) Gradient copolymers with broad glass transition temperature regions: design of purely interphase compositions for damping applications. J Polym Sci Part B Polym Phys 46(1):48–5810.1002/polb.21341 ↗
30. Gu ZX, Xu AJ, Chang JB, Li SW, Xiang YB (2014) Optimization of the production organization pattern in tangshan iron and steel co., ltd. J Iron Steel Res Int 21:17–2210.1016/S1006-706X(14)60114-X ↗
31. Sideridou I, Achilias DS, Kyrikou E (2004) Thermal expansion characteristics of light-cured dental resins and resin composites. Biomaterials 25(15):3087–309710.1016/j.biomaterials.2003.09.078 ↗
32. Chu K, Wang XH, Li YB, Huang DJ, Geng ZR, Zhao XL, Liu H, Zhang H (2018) Thermal properties of graphene/metal composites with aligned graphene. Mater Des 140:85–9410.1016/j.matdes.2017.11.048 ↗
33. Li M, Heng Z, Chen Y, Zou H, Liang M (2018) High toughness induced by wormlike-nanostructure in epoxy thermoset containing amphiphilic PDMS–PCL block copolymers. Ind Eng Chem Res 57(39):13036–1304710.1021/acs.iecr.8b02336 ↗
34. Gong W, Zeng K, Wang L, Zheng S (2008) Poly(hydroxyether of bisphenol A)-block-polydimethylsiloxane alternating block copolymer and its nanostructured blends with epoxy resin. Polymer 49(15):3318–332610.1016/j.polymer.2008.05.032 ↗
35. Qin CL, Cai WM, Cai J, Tang DY, Zhang JS, Qin M (2004) Damping properties and morphology of polyurethane/vinyl ester resin interpenetrating polymer network. Mater Chem Phys 85(2–3):402–40910.1016/j.matchemphys.2004.01.019 ↗