journal article·2005-03

Crack growth in a new nickel-based superalloy at elevated temperature

L. -G. Zhao, J. Tong

Journal of Materials Science· Volume 40· Issue 5
Publisher page

Abstract

Crack growth at elevated temperature has been simulated using the finite element method for sustained and cyclic loading conditions, representative of time-dependent and time-independent crack growth. Elastic-creep (EC) and elastic-plastic-creep (EPC) models have been used to simulate the crack growth under sustained loads at 650 and 725°C. Crack mouth opening displacements as well as the evolution of the inelastic zones due to creep and plasticity have been obtained. Elastic-plastic finite element analysis has been carried out to simulate the crack growth under cyclic load using a constitutive model. Fatigue crack growth was simulated for plane stress, plane strain and generalized plane strain loading conditions. The influence of plasticity on the effective crack driving force was also examined. Creep damage was found to be very limited at both temperatures for this alloy. Plasticity-induced crack closure was found to be absent in plane strain or generalized plane strain conditions, overestimated in plane stress loading conditions by the conventional compliance method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. S. Dalby and J. Tong, J. Mater. Sci., Part I of this paper.
2. J. W. Hutchinson, J. Mech. Phys. Solids 16 (1968) 13.10.1016/0022-5096(68)90014-8 ↗
3. H. Riedel and J. R. Rice, ?ASTM STP700? (1980) p. 112.
4. A. Saxena, D. E. Hall and D. L. McDowell, Engng. Fract. Mech. 62 (1999) 111.10.1016/S0013-7944(98)00085-X ↗
5. A. Saxena, ?ASTM STP905? (1986) p. 185.
6. ASTME1457-92, ASTM, 1992.
7. M. C. Hardy, private communication, 1999.
8. S. Pommier, C. Prioul and P. Bompard, Fatigue Fract. Engng. Mater. Struc. 20 (1997) 93.10.1111/j.1460-2695.1997.tb00405.x ↗
9. S. Pommier and P. Bompard, Fatigue Fract. Engng. Mater. Struc. 23 (2000) 129.10.1046/j.1460-2695.2000.00259.x ↗
10. S. Pommier, Eng. Fract. Mech. 69 (2002) 25.10.1016/S0013-7944(01)00061-3 ↗
11. ABAQUS 5.8, Hibbitt, Karlsson & Sorensen, Inc.
12. L.-G. Zhao, J. Tong and J. Byrne, Eng. Fract. Mech. 68 (2001) 1157.10.1016/S0013-7944(01)00021-2 ↗
13. T. L. Anderson, ?Fracture Mechanics: Fundamentals and Applications? (CRC Press, 1995).
14. J.-L. Chaboche, Int J Plasticity 2 (1986) 149.10.1016/0749-6419(86)90010-0 ↗
15. L.-G. Zhao, J Tong and J. Byrne, Mech. Mater. 33 (2001) 593.10.1016/S0167-6636(01)00071-0 ↗
16. R. C. McClung, B. H. Thacker and S. Toy, Int J Fracture 50 (1991) 27.10.1007/BF00035167 ↗
17. N. A. Fleck and J. C. Newman, ASTM STP987 (1988) p. 319.
18. H. Sehitoglu and W. Sun, ASME J Eng Mater. Tech. 113 (1991) 31.10.1115/1.2903380 ↗
19. N. A. Fleck, ?Fatigue Crack Measurement: Techniques and Applications, edited by K. J. Marsh, R. A. Smith and R. O. Ritchie (EMAS, 1991).
20. R. C. McClung and H. Sehitoglu, Eng. Fract. Mech. 33 (1989) 237.10.1016/0013-7944(89)90027-1 ↗