Effect of 0.4 wt% yttrium addition and heat treatment on the high-temperature compression behavior of cast AZ80
Source abstract
Abstract
The effects of 0.4 wt% yttrium (Y) addition, annealing, and annealing + aging on the hot compression behavior of cast AZ80 were studied at strain rates between 10−4 and 10−2 s−1 and temperatures ranging between 573 and 673 K. The apparent activation energies of the as-cast AZ80 and AZ80 + 0.4Y were 122 and 182 kJ/mol, respectively. Shear bands formed in each alloys. Compared with the as-cast AZ80, more shear bands formed, and a larger volume of cracks initiated and propagated from the grain boundaries and shear bands in as-cast AZ80 + 0.4Y. In general, Y addition increased the peak stress at lower temperatures and higher strain rates. The annealed and annealed + aged alloys exhibited more shear bands and larger compressive peak stresses than their respective as-cast counterparts after compression at 573 K, 10−2 s−1. There were more shear bands in the annealed and annealed + aged AZ80 + 0.4Y compared with AZ80 after compression at 573 K, 10−2 s−1. Fine precipitates appeared in the shear bands of AZ80 + 0.4Y. The average width of the shear bands increased with increasing temperature and decreasing strain rate, and the angles of intersection between the different shear bands were approximately 90°.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Quan GF, Ren LB (2014) Process and property of superplastic mould forged AZ80 wheel hub. Mater Sci Forum 788:12–1610.4028/www.scientific.net/MSF.788.12 ↗
2. Ren LB, Quan GF, Jiang ZZ, Yin DD (2016) Atmospheric heat dispersion research of Mg–Al–Zn magnesium alloys. Rare Metal Mater Eng 46(5):1265–1270
3. Ren LB, Quan GF, Xu YG, Yin DD, Lu JW, Dang JT (2017) Effect of heat treatment and pre-deformation on damping capacity of cast Mg–Y binary alloys. J Alloy Compd 699:976–98210.1016/j.jallcom.2016.12.299 ↗
4. Ren LB, Fan LL, Zhou MY, Guo YY, Zhang YWX, Boehlert CJ, Quan GF (2018) Magnesium application in railway rolling stocks: a new challenge and opportunity for lightweighting. Int J Lightweight Mater Manuf 1:81–88
5. Chen ZH, Xia WJ, Yan HG (2005) Wrought magnesium alloys. Chemical Industry Press, Beijing (in Chinese)
6. Su Z, Wan L, Sun C, Cai Y, Yang DJ (2016) Hot deformation behavior of AZ80 magnesium alloy towards optimization of its hot workability. Mater Charact 122:90–9710.1016/j.matchar.2016.10.026 ↗
7. Li HZ, Wei XY, Ouyang J, Jian J, Li GY (2013) Hot deformation behavior of extruded AZ80 magnesium alloy. Trans Nonferrous Met Soc China 23(11):3180–318510.1016/S1003-6326(13)62850-2 ↗
8. Quan GZ, Ku TW, Song WJ, Kang BS (2011) The workability evaluation of wrought AZ80 magnesium alloy in hot compression. Mater Des 32(4):2462–246810.1016/j.matdes.2010.11.025 ↗
9. Ren LB, Wu J, Quan GF (2014) Plastic behavior of AZ80 alloy during low strain rate tension at elevated temperature. Mater Sci Eng A 612(33):278–28610.1016/j.msea.2014.06.004 ↗
10. Kim J, Okayasu K, Fukutomi H (2013) Deformation behavior and texture formation in AZ80 magnesium alloy during uniaxial compression deformation at high temperatures. Mater Trans 54(2):192–19810.2320/matertrans.H-M2012832 ↗
11. Ahn K, Lee HJ, Yoon J (2016) Material model for dynamic recrystallization of Mg–8Al–0.5Zn alloy under uni-axial compressive deformation with variation of forming temperatures. Mater Sci Eng A 651:1010–101710.1016/j.msea.2015.11.055 ↗
12. Xu SW, Matsumoto N, Kamado S (2009) Effect of pre-aging treatment on microstructure and mechanical properties of hot compressed Mg–9Al–1Zn alloy. Mater Sci Eng A 517(1–2):354–36010.1016/j.msea.2009.04.029 ↗
13. Luo L, Xiao Z, Huo Q, Yang Y, Huang WY, Guo JC, Ye YX, Yang XY (2018) Enhanced mechanical properties of a hot-extruded AZ80 Mg alloy rod by pre-treatments and post-hot compression. J Alloy Compd 740:180–19310.1016/j.jallcom.2017.12.296 ↗
14. Ren LB, Quan GF, Zhou MY, Guo YY, Jiang ZZ, Tang Q (2017) Effect of Y addition on the aging hardening behavior and precipitation evolution of extruded Mg–Al–Zn alloys. Mater Sci Eng A 690:195–20710.1016/j.msea.2017.02.102 ↗
15. Robson JD (2014) Effect of rare-earth additions on the texture of wrought magnesium alloys: the role of grain boundary segregation. Metall Mater Trans A 45(8):3205–321210.1007/s11661-013-1950-1 ↗
16. Imandoust A, Barrett CD, Al-Samman T, Inal KA, Kadiri HE (2017) A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys. J Mater Sci 52(1):1–2910.1007/s10853-016-0371-0 ↗
17. Chang HW, Qiu D, Taylor JA, Easton MA, Zhang MX (2013) The role of Al2Y in grain refinement in Mg-Al-Y alloy system. J Magnes Alloys 1(2):115–12110.1016/j.jma.2013.07.006 ↗
18. Qiu D, Zhang MX, Kelly PM (2009) Crystallography of heterogeneous nucleation of Mg grains on Al2Y nucleation particles in an Mg-10 wt% Y alloy. Scr Mater 61(3):312–31510.1016/j.scriptamat.2009.04.011 ↗
19. Qiu D, Zhang MX (2014) The nucleation crystallography and wettability of Mg grains on active Al2Y inoculants in an Mg-10 wt% Y Alloy. J Alloy Compd 586(5):39–4410.1016/j.jallcom.2013.10.042 ↗
20. Stanford N, Marceau RKW, Barnett MR (2015) The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys. Acta Mater 82:447–45610.1016/j.actamat.2014.09.022 ↗
21. Hantzsche K, Bohlen J, Wendt J, Kainer KU, Yi SB, Letzig D (2010) Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets. Scr Mater 63:725–73010.1016/j.scriptamat.2009.12.033 ↗
22. Sandlöbes S, Zaefferer S, Schestakow I, Yi S, Gonzalez-Martinez R (2011) On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys. Acta Materilia 59(2):429–43910.1016/j.actamat.2010.08.031 ↗
23. Zhang DL, Wen HM, Kumar MA, Chen F, Zhang LM, Beyerlein IJ, Schoenung JM, Mahajan S, Lavernia EJ (2016) Yield symmetry and reduced strength differential in Mg-2.5Y alloy. Acta Materilia 120:75–8510.1016/j.actamat.2016.08.037 ↗
24. Wu ZX, Ahmad R, Yin BL, Sandlöbes S, Curtin WA (2018) Mechanistic origin and prediction of enhanced ductility in magnesium alloys. Science 359(6374):447–45210.1126/science.aap8716 ↗
25. Agnew SR, Yoo MH, Tomé CN (2001) Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y. Acta Mater 49:4277–428910.1016/S1359-6454(01)00297-X ↗
26. Huang ZH, Wang LY, Zhou BJ, Fischer T, Yi SB, Zeng XQ (2018) Observation of non-basal slip in Mg–Y by in situ three-dimensional X-ray diffraction. Scr Mater 143:44–4810.1016/j.scriptamat.2017.09.011 ↗
27. Imandoust A, Barrett CD, Oppedal AL, Whittington WR, Paudel Y, Kadiri HE (2017) Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys. Acta Mater 138:27–4110.1016/j.actamat.2017.07.038 ↗
28. Imandoust A, Barrett CD, Al-Samman T, Tschopp MA, Essadiqi E, Hort N, Kadiri HE (2018) Unraveling recrystallization mechanisms governing texture development from rare-earth element additions to magnesium. Metall Mater Trans A 49(5):1809–182910.1007/s11661-018-4520-8 ↗
29. Kula A, Jia XH, Mishra RK, Niewczas M (2016) Mechanical properties of Mg-Gd and Mg-Y solid solutions. Metall Mater Trans B 47(6):3333–334210.1007/s11663-015-0565-x ↗
30. Yasi JA, Hector LG Jr, Trinkle DR (2012) Prediction of thermal cross-slip stress in magnesium alloys from a geometric interaction model. Acta Mater 60(5):2350–235810.1016/j.actamat.2012.01.004 ↗
31. Ren LB, Boehlert CJ, Quan GF (2018) Mechanical asymmetry and anisotropy resulting from the yttrium addition to AZ80, unpublished 2018
32. Jung IH, Sanjari M, Kim J, Yue S (2015) Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg–RE alloys. Scr Mater 102:1–610.1016/j.scriptamat.2014.12.010 ↗
33. Boehlert CJ, Chen Z, Gutiérrez-Urrutia I, Llorca J, Pérez-Prado MT (2012) In situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ31. Acta Mater 60(4):1889–190410.1016/j.actamat.2011.10.025 ↗
34. Chakkedath A, Bohlen J, Yi SB, Letzig D, Chen Z, Boehlert CJ (2014) The effect of nd on the tension and compression deformation behavior of extruded Mg–1Mn (wt pct) at temperatures between 298 K and 523 K (25 °C and 250 °C). Metall Mater Trans A 45(8):3254–327410.1007/s11661-013-2143-7 ↗
35. Wang H, Boehlert CJ, Wang QD, Yin DD, Ding WJ (2016) In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg–10Gd–3Y–0.5Zr (wt%) at elevated temperatures. Int J Plast 84:255–27610.1016/j.ijplas.2016.06.001 ↗
36. Zhou MY, Qu XN, Ren LB, Fan LL, Zhang YWX, Guo YY, Quan GF, Tang Q, Liu B, Sun H (2017) The effects of carbon nanotubes on the mechanical and wear properties of AZ31 alloy. Materials 10(12):1385–139210.3390/ma10121385 ↗
37. Fabre A, Masse JE (2012) Friction behavior of laser cladding magnesium alloy against AISI 52100 steel. Tribol Int 46(1):247–25310.1016/j.triboint.2011.06.030 ↗
38. Boehlert CJ, Majumdar BS, Seetharaman V, Miracle DB, Part I (1999) The microstructural evolution in Ti–Al–Nb O + BCC orthorhombic alloys. Metall Mater Trans A 30:2305–232310.1007/s11661-999-0240-4 ↗
39. Bhattacharya R, Wynne BP, Rainforth WM (2012) Flow softening behavior during dynamic recrystallization in Mg–3Al–1Zn magnesium alloy. Scr Mater 67(3):277–28010.1016/j.scriptamat.2012.04.040 ↗
40. Hood GM (1978) An atom size effect in tracer diffusion. J Phys F Met Phys 8(8):1677–168910.1088/0305-4608/8/8/009 ↗
41. Barrett CD, Imandoust A, Kadiri HE (2018) The effect of rare earth element segregation on grain boundary energy and mobility in magnesium and ensuing texture weakening. Scr Mater 146:46–5010.1016/j.scriptamat.2017.11.004 ↗
42. Nie JF, Zhu YM, Liu JZ, Fang XY (2013) Periodic segregation of solute atoms in fully coherent twin boundaries. Science 340(6135):957–96010.1126/science.1229369 ↗
43. Somekawa H, Watanabe H, Basha DA, Singh A, Inoue T (2017) Effect of twin boundary segregation on damping properties in magnesium alloy. Scr Mater 129:35–3810.1016/j.scriptamat.2016.10.019 ↗
44. Galiyev A, Sitdikov O, Kaibyshev R (2003) Deformation behavior and controlling mechanisms for plastic flow of magnesium and magnesium alloy. Mater Trans 44(4):426–43510.2320/matertrans.44.426 ↗
45. Slużalec A (2010) An analysis of dead zones in the process of direct extrusion through single-hole flat die. Int J Numer Methods Biomed Eng 7(4):281–287
46. Fereshteh-Saniee F, Fallah-Nejad K, Beheshtiha AS, Badnava H (2013) Investigation of tension and compression behavior of AZ80 magnesium alloy. Mater Des 50(17):702–71210.1016/j.matdes.2013.03.080 ↗
47. Imandoust A, Barrett CD, Kadiri HE (2018) Effect of rare earth addition on 10 $$ \overline{{1}}2 $$ 1 ¯ 2 twinning induced hardening in magnesium. Mater Sci Eng A 720:225–23010.1016/j.msea.2018.02.067 ↗
48. Cai HS, Guo F, Su J, Liu L, Chen BD (2018) Study on microstructure and strengthening mechanism of AZ91-Y magnesium alloy. Mater Res Express 5(3):03650110.1088/2053-1591/aab0b7 ↗
49. Changizian P, Zarei-Hanzaki A, Ghambari M, Imandoust A (2013) Flow localization during severe plastic deformation of AZ81 magnesium alloy: micro-shear banding phenomenon. Mater Sci Eng A 582:8–1410.1016/j.msea.2013.05.069 ↗