journal article·2018-12

In situ observation of nanoparticle formation in nickel-based mechanical alloyed powders

Man Wang, Heung Nam Han, Hee-Suk Chung, Young-Bum Chun, Jinsung Jang

Journal of Materials Science· Volume 53· Issue 23
Publisher page

Abstract

Nickel alloy powders with additions of Gd2O3 and Ti were mechanically alloyed (MA) using a high-energy ball mill. The formation behaviors of nanoparticles in nickel-based MA powders were investigated using in situ characterization methods, including high-temperature X-ray diffraction and in situ transmission electron microscope (TEM). The added Gd2O3 particles were dissolved into the matrix during MA process. Recrystallization of the MA powders occurred between 810 and 880 °C, followed by grain growth. Precipitation of nanoparticles was observed after grain growth using in situ TEM and was attributed to the reduced dislocations and grain boundary area. More importantly, these nanoparticles were dissolved into matrix after the specimen was reheated to a higher temperature of 1014 °C. During subsequent cooling, Gd2TiO5 particles were re-precipitated in a more uniform way, including smaller average size of 6.8 nm and reduced interparticle spacing of 26.9 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Ukai S, Fujiwara M (2002) Perspective of ODS alloys application in nuclear environments. J Nucl Mater 307:749–75710.1016/S0022-3115(02)01043-7 ↗
2. Murty K, Charit I (2008) Structural materials for Gen-IV nuclear reactors: challenges and opportunities. J Nucl Mater 383(1–2):189–19510.1016/j.jnucmat.2008.08.044 ↗
3. Zinkle SJ, Was G (2013) Materials challenges in nuclear energy. Acta Mater 61(3):735–75810.1016/j.actamat.2012.11.004 ↗
4. Herrick R, Weertman J, Petkovic-Luton R, Luton M (1988) Dislocation/particle interactions in an oxide dispersion strengthened alloy. Scr Metall 22(12):1879–188410.1016/S0036-9748(88)80230-8 ↗
5. Zakine C, Prioul C, Francois D (1996) Creep behaviour of ODS steels. Mater Sci Eng, A 219(1–2):102–10810.1016/S0921-5093(96)10415-9 ↗
6. Nganbe M, Heilmaier M (2004) Modelling of particle strengthening in the γ’ and oxide dispersion strengthened nickel-base superalloy PM3030. Mater Sci Eng A 387:609–61210.1016/j.msea.2004.01.109 ↗
7. Oono N, Ukai S, Kondo S, Hashitomi O, Kimura A (2015) Irradiation effects in oxide dispersion strengthened (ODS) Ni-base alloys for Gen. IV nuclear reactors. J Nucl Mater 465:835–83910.1016/j.jnucmat.2015.06.057 ↗
8. Zinkle S, Boutard J, Hoelzer D, Kimura A, Lindau R, Odette G, Rieth M, Tan L, Tanigawa H (2017) Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications. Nucl Fusion 57(9):09200510.1088/1741-4326/57/9/092005 ↗
9. Okuda T, Fujiwara M (1995) Dispersion behaviour of oxide particles in mechanically alloyed ODS steel. J Mater Sci Lett 14(22):1600–160310.1007/BF00455428 ↗
10. Alinger M, Odette G, Hoelzer D (2004) The development and stability of Y–Ti–O nanoclusters in mechanically alloyed Fe–Cr based ferritic alloys. J Nucl Mater 329:382–38610.1016/j.jnucmat.2004.04.042 ↗
11. Alinger M, Odette G, Hoelzer D (2009) On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys. Acta Mater 57(2):392–40610.1016/j.actamat.2008.09.025 ↗
12. Zhang H, Gorley MJ, Chong KB, Fitzpatrick ME, Roberts SG, Grant PS (2014) An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels. J Alloys Compd 582:769–77310.1016/j.jallcom.2013.08.069 ↗
13. Zhang L, Ukai S, Hoshino T, Hayashi S, Qu X (2009) Y2O3 evolution and dispersion refinement in Co-base ODS alloys. Acta Mater 57(12):3671–368210.1016/j.actamat.2009.04.033 ↗
14. Laurent-Brocq M, Legendre F, Mathon M-H, Mascaro A, Poissonnet S, Radiguet B, Pareige P, Loyer M, Leseigneur O (2012) Influence of ball-milling and annealing conditions on nanocluster characteristics in oxide dispersion strengthened steels. Acta Mater 60(20):7150–715910.1016/j.actamat.2012.09.024 ↗
15. Saber M, Xu W, Li L, Zhu Y, Koch CC, Scattergood RO (2014) Size effect of primary Y2O3 additions on the characteristics of the nanostructured ferritic ODS alloys: comparing as-milled and as-milled/annealed alloys using S/TEM. J Nucl Mater 452(1):223–22910.1016/j.jnucmat.2014.05.014 ↗
16. He P, Gao P, Tian Q, Lv J, Yao W (2017) An in situ SANS study of nanoparticles formation in 9Cr ODS steel powders. Mater Lett 209:535–53810.1016/j.matlet.2017.08.051 ↗
17. Toualbi L, Ratti M, André G, Onimus F, De Carlan Y (2011) Use of neutron and X-ray diffraction to study the precipitation mechanisms of oxides in ODS materials. J Nucl Mater 417(1):225–22810.1016/j.jnucmat.2010.12.071 ↗
18. Hilger I, Tegel M, Gorley M, Grant P, Weißgärber T, Kieback B (2014) The structural changes of Y2O3 in ferritic ODS alloys during milling. J Nucl Mater 447(1):242–24710.1016/j.jnucmat.2014.01.026 ↗
19. Dai L, Liu Y, Dong Z (2012) Size and structure evolution of yttria in ODS ferritic alloy powder during mechanical milling and subsequent annealing. Powder Technol 217:281–28710.1016/j.powtec.2011.10.039 ↗
20. Liu T, Shen H, Wang C, Chou W (2013) Structure evolution of Y2O3 nanoparticle/Fe composite during mechanical milling and annealing. Prog Nat Sci Mater Int 23(4):434–43910.1016/j.pnsc.2013.06.009 ↗
21. Hong K-H, Kim JH, Chang K, Kwon J (2016) Prediction of potential candidates for dispersion strengthening materials in Ni based alloys. Comput Mater Sci 117:215–22010.1016/j.commatsci.2016.01.041 ↗
22. Rodríguez-Carvajal J (2003) Study of micro-structural effects by powder diffraction using the program FULLPROF. Laboratoire Léon Brillouin (CEA-CNRS), CEA/Saclay 91191
23. Rietveld H (1969) A profile refinement method for nuclear and magnetic structures. J Appl Crystallogr 2(2):65–7110.1107/S0021889869006558 ↗
24. Williams CA, Unifantowicz P, Baluc N, Smith GD, Marquis EA (2013) The formation and evolution of oxide particles in oxide-dispersion-strengthened ferritic steels during processing. Acta Mater 61(6):2219–223510.1016/j.actamat.2012.12.042 ↗
25. Williams DB, Carter CB (1996) The transmission electron microscope. In: Transmission electron microscopy. Springer, Boston, pp 3–1710.1007/978-1-4757-2519-3_1 ↗
26. Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46(1):1–18410.1016/S0079-6425(99)00010-9 ↗
27. Fathy A, Wagih A, El-Hamid MA, Hassan A (2013) Effect of mechanical milling on the morphology and structural evaluation of Al–Al2O3 nanocomposite powders. Int J Eng Trans A Basics 27(4):625
28. Wagih A (2015) Mechanical properties of Al–Mg/Al2O3 nanocomposite powder produced by mechanical alloying. Adv Powder Technol 26(1):253–25810.1016/j.apt.2014.10.005 ↗
29. Wagih A (2016) Synthesis of nanocrystalline Al2O3 reinforced Al nanocomposites by high-energy mechanical alloying: microstructural evolution and mechanical properties. Trans Indian Inst Met 69(4):851–85710.1007/s12666-015-0570-4 ↗
30. Chen Y, Jones A, Miller U (2002) Origin of porosity in oxide-dispersion-strengthened alloys produced by mechanical alloying. Metall Mater Trans A 33(8):2713–271810.1007/s11661-002-0393-x ↗
31. Ortega Y, Monge M, De Castro V, Muñoz A, Leguey T, Pareja R (2009) Void formation in ODS EUROFER produced by hot isostatic pressing. J Nucl Mater 386:462–46510.1016/j.jnucmat.2008.12.145 ↗
32. Capdevila C, Miller MK, Toda I, Chao J (2010) Influence of the α–α′ phase separation on the tensile properties of Fe-base ODS PM 2000 alloy. Mater Sci Eng A 527(29):7931–793810.1016/j.msea.2010.08.083 ↗
33. Wagih A, Fathy A (2018) Improving compressibility and thermal properties of Al–Al2O3 nanocomposites using Mg particles. J Mater Sci. https://doi.org/10.1007/s10853-018-2422-110.1007/s10853-018-2422-1 ↗
34. Wagih A, Fathy A, Sebaey TA (2016) Experimental investigation on the compressibility of Al/Al2O3 nanocomposites. Int J Mater Prod Technol 52(3–4):312–33210.1504/IJMPT.2016.075497 ↗