journal article·2018-10

Synthesis of LaB6–Al2O3 nanocomposite powders via ball milling-assisted annealing

Emre Tekoğlu, Ceren İmer, Duygu Ağaoğulları, M. Lütfi Öveçoğlu

Journal of Materials Science· Volume 53· Issue 19
Publisher page

Abstract

In this study, LaB6–Al2O3 nanocomposite powders were synthesized via ball milling-assisted annealing process starting from La2O3–B2O3–Al powder blends. High-energy ball milling was conducted at various durations (0, 3, 6 and 9 h). Then, the milled powders were annealed at 1200 °C for 3 h under Ar atmosphere in order to obtain LaB6 and Al2O3 phases as reaction products. X-ray diffractometry (XRD), scanning electron microscopy/energy-dispersive spectrometry (SEM/EDS) and transmission electron microscopy (TEM) techniques were utilized to carry out microstructural characterization of the powders. No reaction between the reactants was observed in the XRD patterns of the milled powders, indicating that high-energy ball milling did not trigger any chemical reactions even after milling for 9 h. LaAlO3 and LaBO3 phases existed in the annealed powders which were milled for 0, 3 and 6 h. LaBO3 phase was removed after HCl leaching. 9-h milled and annealed powders did not exhibit any undesired phases such as LaAlO3 and LaBO3 after leaching step, and pure nanocrystalline LaB6–Al2O3 composite powders were successfully obtained. TEM analyses revealed that very fine LaB6 particles (~ 100 nm) were embedded in coarse Al2O3 (~ 500 nm) particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rare-earth and actinide compounds · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Shi XL, Xu FM, Zhang ZJ et al (2010) Mechanical properties of hot-pressed Al2O3/SiC composites. Mater Sci Eng, A 527:4646–4649. https://doi.org/10.1016/j.msea.2010.03.03510.1016/j.msea.2010.03.035 ↗
2. Hosseini SN, Karimzadeh F, Enayati MH (2012) Mechanochemical synthesis of Al2O3/Co nanocomposite by aluminothermic reaction. Adv Powder Technol 23:334–337. https://doi.org/10.1016/j.apt.2011.04.00810.1016/j.apt.2011.04.008 ↗
3. Nikkhah AJ, Torabi O, Ebrahimi-Kahrizsangi R et al (2014) Investigation on mechanochemical synthesis of Al2O 3/BN nanocomposite by aluminothermic reaction. Ceram Int 40:5559–5566. https://doi.org/10.1016/j.ceramint.2013.10.14710.1016/j.ceramint.2013.10.147 ↗
4. Palmero P, Kern F, Sommer F et al (2014) Issues in nanocomposite ceramic engineering: focus on processing and properties of alumina-based composites. J Appl Biomater Funct Mater. https://doi.org/10.5301/jabfm.500018510.5301/jabfm.5000185 ↗
5. Mozalev A, Sakairi M, Takahashi H et al (2014) Nanostructured anodic-alumina-based dielectrics for high-frequency integral capacitors. Thin Solid Films 550:486–494. https://doi.org/10.1016/j.tsf.2012.02.07710.1016/j.tsf.2012.02.077 ↗
6. Reddy MP, Ubaid F, Shakoor RA et al (2017) Effect of reinforcement concentration on the properties of hot extruded Al–Al2O3 composites synthesized through microwave sintering process. Mater Sci Eng A 696:60–69. https://doi.org/10.1016/j.msea.2017.04.06410.1016/j.msea.2017.04.064 ↗
7. Lihong B, Wurentuya Wei W, Tegus O (2014) A new route for the synthesis of submicron-sized LaB6. Mater Charact 97:69–73. https://doi.org/10.1016/j.matchar.2014.08.01110.1016/j.matchar.2014.08.011 ↗
8. Xu J, Min G Hui, Hu L Jie, et al. (2009) Dependence of characteristics of LaB6 films on DC magnetron sputtering power. Trans Nonferrous Met Soc China (English Ed 19:952–955. https://doi.org/10.1016/s1003-6326(08)60384-210.1016/s1003-6326(08)60384-2 ↗
9. Kitamura K, Osaka T, Nagao T et al (1993) Surface phonon dispersion curves of NiAl(111). Jpn J Appl Phys 32:3252–3256. https://doi.org/10.1143/JJAP.32.325210.1143/JJAP.32.3252 ↗
10. Hossain FM, Riley DP, Murch GE (2005) Ab initio calculations of the electronic structure and bonding characteristics of LaB6. Phys Rev B Condens Matter Mater Phys. https://doi.org/10.1103/PhysRevB.72.23510110.1103/PhysRevB.72.235101 ↗
11. Zhou X, Zhang H, Cheng C et al (2009) First-principles study of structural, electronic and elastic properties of diboride of vanadium. Phys B Condens Matter 404:1527–1531. https://doi.org/10.1016/j.physb.2009.01.01310.1016/j.physb.2009.01.013 ↗
12. Otani S, Nakagawa H, Nishi Y, Kieda N (2000) Floating zone growth and high temperature hardness of rare-earth hexaboride crystals: laB6, CeB6, PrB6, NdB6, and SmB6. J Solid State Chem 154:238–241. https://doi.org/10.1006/jssc.2000.884210.1006/jssc.2000.8842 ↗
13. Otani S, Tanaka T, Ishizawa Y (1993) Crystal quality and high temperature hardness of LaB6 crystals prepared by the floating zone method. J Alloys Compd. https://doi.org/10.1016/0925-8388(93)90506-I10.1016/0925-8388(93)90506-I ↗
14. Takagi K, Ishii M (1977) Growth of LaB6 single crystals by a laser heated floating zone method. J Cryst Growth 40:1–5. https://doi.org/10.1016/0022-0248(77)90025-210.1016/0022-0248(77)90025-2 ↗
15. Motojima S, Takahashi Y, Sugiyama K (1978) Chemical vapor growth of LaB6 whiskers and crystals having a sharp tip. J Cryst Growth 44:106–109. https://doi.org/10.1016/0022-0248(78)90333-010.1016/0022-0248(78)90333-0 ↗
16. Kher S, Spencer JT (1998) Chemical vapor deposition of metal borides 7. The relatively low temperature formation of crystalline lanthanum hexaboride thin films from boron hydride cluster compounds by chemical vapor deposition. J Phys Chem Solids 59:1343–1351. https://doi.org/10.1016/S0022-3697(97)00230-810.1016/S0022-3697(97)00230-8 ↗
17. Hasan M, Sugo H, Kisi E (2013) Low temperature carbothermal and boron carbide reduction synthesis of LaB6. J Alloys Compd 578:176–182. https://doi.org/10.1016/j.jallcom.2013.05.00810.1016/j.jallcom.2013.05.008 ↗
18. Yuan Y, Zhang L, Liang L et al (2011) A solid-state reaction route to prepare LaB6 nanocrystals in vacuum. Ceram Int 37:2891–2896. https://doi.org/10.1016/j.ceramint.2011.03.07310.1016/j.ceramint.2011.03.073 ↗
19. Zhang M, Yuan L, Wang X et al (2008) A low-temperature route for the synthesis of nanocrystalline LaB6. J Solid State Chem 181:294–297. https://doi.org/10.1016/j.jssc.2007.12.01110.1016/j.jssc.2007.12.011 ↗
20. Ağaoğulları D, Duman İ, Öveçoğlu ML (2012) Synthesis of LaB6 powders from La2O3, B2O3 and Mg blends via a mechanochemical route. Ceram Int 38:6203–6214. https://doi.org/10.1016/j.ceramint.2012.04.07310.1016/j.ceramint.2012.04.073 ↗
21. Ağaoğullari D, Balcı Ö, Öveçoğlu ML, Duman İ (2016) Preparation of LaB6 powders via calciothermic reduction using mechanochemistry and acid leaching. KONA Powder Part J 2016:203–218. https://doi.org/10.14356/kona.201600110.14356/kona.2016001 ↗
22. Gilman PS, Benjamin JS (1983) Mechanical alloying. Annu Rev Mater Sci 13:279–300. https://doi.org/10.1146/annurev.ms.13.080183.00143110.1146/annurev.ms.13.080183.001431 ↗
23. Suryanarayana C, Ivanov E, Boldyrev VV (2001) The science and technology of mechanical alloying. Mater Sci Eng, A 304–306:151–158. https://doi.org/10.1016/S0921-5093(00)01465-910.1016/S0921-5093(00)01465-9 ↗
24. Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46:1–184. https://doi.org/10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
25. Benjamin JS (1990) Mechanical alloying—a perspective. Met Powder Rep 45:122–127. https://doi.org/10.1016/S0026-0657(10)80124-910.1016/S0026-0657(10)80124-9 ↗
26. Hadef F, Otmani A (2015) Mechanical alloying/milling. In: Handb Mech Nanostructuring, pp 263–27610.1002/9783527674947.ch12 ↗
27. Sritharan T, Boey FYC, Srinivas A (2007) Synthesis of complex ceramics by mechanochemical activation. J Mater Process Technol 192–193:255–258. https://doi.org/10.1016/j.jmatprotec.2007.04.07910.1016/j.jmatprotec.2007.04.079 ↗
28. Suryanarayana C, Ivanov E (2013) 3—Mechanochemical synthesis of nanocrystalline metal powders. In: Adv Powder Metall, pp 42–6810.1533/9780857098900.1.42 ↗
29. Balcı Ö, Ağaoğulları D, Öveçoğlu ML, Duman İ (2016) Synthesis of niobium borides by powder metallurgy methods using Nb2O5, B2O3 and Mg blends. Trans Nonferrous Met Soc China (English Ed 26:747–758. https://doi.org/10.1016/s1003-6326(16)64165-110.1016/s1003-6326(16)64165-1 ↗
30. Aĝaoĝullari D, Gökçe H, Duman I, Öveçoĝlu ML (2012) Characterization investigations of ZrB 2/ZrC ceramic powders synthesized by mechanical alloying of elemental Zr, B and C blends. J Eur Ceram Soc 32:1447–1455. https://doi.org/10.1016/j.jeurceramsoc.2011.04.02610.1016/j.jeurceramsoc.2011.04.026 ↗
31. Akgün B, Çamurlu HE, Topkaya Y, Sevinç N (2011) Mechanochemical and volume combustion synthesis of ZrB2. Int J Refract Met Hard Mater 29:601–607. https://doi.org/10.1016/j.ijrmhm.2011.04.00510.1016/j.ijrmhm.2011.04.005 ↗
32. Khaghani-Dehaghani MA, Ebrahimi-Kahrizsangi R, Setoudeh N, Nasiri-Tabrizi B (2011) Mechanochemical synthesis of Al2O3–TiB2 nanocomposite powder from Al–TiO2–H3BO3 mixture. Int J Refract Met Hard Mater 29:244–249. https://doi.org/10.1016/j.ijrmhm.2010.11.00110.1016/j.ijrmhm.2010.11.001 ↗
33. Yeh CL, Li RF (2009) Formation of TiB2–Al2O3 and NbB2–Al2O3 composites by combustion synthesis involving thermite reactions. Chem Eng J 147:405–411. https://doi.org/10.1016/j.cej.2009.01.00710.1016/j.cej.2009.01.007 ↗
34. Mishra SK, Das SK, Pathak LC (2006) Sintering behaviour of self-propagating high temperature synthesised ZrB2-Al2O3 composite powder. Mater Sci Eng a-Structural Mater Prop Microstruct Process 426:229–234. https://doi.org/10.1016/j.msea.2006.04.02610.1016/j.msea.2006.04.026 ↗
35. Jianxin D, Xing A (1997) Wear resistance of Al2O3/TiB2 ceramic cutting tools in sliding wear tests and in machining processes. J Mater Process Technol 72:249–255. https://doi.org/10.1016/S0924-0136(97)00176-310.1016/S0924-0136(97)00176-3 ↗
36. Mishra S, Rupa P, Das S, Shcherbakov V (2007) Effect of titanium diluent on the fabrication of Al2O3–ZrB2 composite by SHS dynamic compaction. Compos Sci Technol 67:1734–1739. https://doi.org/10.1016/j.compscitech.2006.05.01410.1016/j.compscitech.2006.05.014 ↗
37. Williamson G, Hall W (1953) X-ray line broadening from filed aluminium and wolfram. Acta Metall 1:22–31. https://doi.org/10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
38. Lu L, Lai MO, Zhang S (1997) Diffusion in mechanical alloying. J Mater Process Technol 67:100–104. https://doi.org/10.1016/S0924-0136(96)02826-910.1016/S0924-0136(96)02826-9 ↗
39. Chauruka SR, Hassanpour A, Brydson R et al (2015) Effect of mill type on the size reduction and phase transformation of gamma alumina. Chem Eng Sci 134:774–783. https://doi.org/10.1016/j.ces.2015.06.00410.1016/j.ces.2015.06.004 ↗