Spark plasma sintering and decomposition of the Y3NbO7:Eu phase
Source abstract
Abstract
The spark plasma sintering (SPS) of Eu3+-doped Y3NbO7 niobate phase was investigated to obtain dense ceramics. Although SPS allowed obtaining high-density ceramics, decomposition of the niobate phase occurred at high temperature and was promoted by the SPS process, which limited its use as an optical material. The niobate phase has been prepared by two synthesis methods: a solid-state route and a sol–gel method. The purity, density and microstructure of the dense ceramics were analyzed after spark plasma sintering. Translucent ceramics were only obtained from sol–gel powders after SPS at 1600 °C during 20 min with a heating rate of 5 °C/min. The sintering study of the pure niobate phase showed that during SPS process and especially in the presence of the high electrical field the Y3NbO7 phase is metastable at 1600 °C. A decomposition of the niobate compound is clearly demonstrated by luminescence measurements when high heating rates were used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Nuclear materials and radiation effects · Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Chen S, Wu Y (2013) New opportunities for transparent ceramics. Am Ceram Soc Bull 92:32–37
2. Kong LB, Huang Y, Dong Z, Zhang T, Que W, Zhang J, Tang D, Li S (2015) Processing and applications of transparent ceramics. Encycl Inorg Bioinorg Chem. doi: 10.1002/9781119951438.eibc230510.1002/9781119951438.eibc2305 ↗
3. Klement R, Rolc S, Mikulikova R, Krestan J (2008) Transparent armour materials. J Eur Ceram Soc 28:1091–109510.1016/j.jeurceramsoc.2007.09.036 ↗
4. Ikesue A, Kinoshita T, Kamata K, Yoshida K (1995) Fabrication and optical properties of high-performance polycrystalline Nd:YAG ceramics for solid-state lasers. J Am Ceram Soc 78:1033–104010.1111/j.1151-2916.1995.tb08433.x ↗
5. Cherepy NJ, Kuntz JD, Tillotson TM, Speaks DT, Payne SA, Chai BHT, Porter-Chapman Y, Derenzo SE (2007) Cerium-doped single crystal and transparent ceramic lutetium aluminum garnet scintillators. Nucl Instrum Methods A 579:38–4110.1016/j.nima.2007.04.009 ↗
6. Peuchert U, Okano Y, Menke Y, Reichel S, Ikesue A (2009) Transparent cubic-ZrO2 ceramics for application as optical lenses. J Eur Ceram Soc 29:283–29110.1016/j.jeurceramsoc.2008.03.028 ↗
7. Coble RL (1959) Preparation of transparent ceramic Al2O3. Am Ceram Soc Bull 38:507–510
8. Anderson RC (1970) Transparent yttria-based ceramics and method for producing same. US patent no. 3 545 987
9. Greskovitch G, Chernoch JP (1973) Polycrystalline ceramic lasers. J Appl Phys 44:4599–460610.1063/1.1662008 ↗
10. Mazdiyasni KS, Brown LM (1972) Synthesis and mechanical properties of stoichiometric aluminum silicate (mullite). J Am Ceram Soc 55:548–55210.1111/j.1151-2916.1972.tb13434.x ↗
11. Li JG, Ikegami T, Lee JH, Mori T (2000) Low-temperature fabrication of transparent Yttrium Aluminum Garnet (YAG) ceramics without additives. J Am Ceram Soc 83:961–96310.1111/j.1151-2916.2000.tb01305.x ↗
12. Ikegami T, Li J-G, Mori T, Moriyoshi Y (2002) Fabrication of transparent yttria ceramics by the low-temperature synthesis of yttrium hydroxide. J Am Ceram Soc 85:1725–172910.1111/j.1151-2916.2002.tb00342.x ↗
13. Okubo T, Kakihana M (1997) Low temperature synthesis of Y3NbO7 by polymerizable complex method: utilization of a methanol-citric acid solution of NbCl5 as a novel niobium precursor. J Alloys Compd 256:151–15410.1016/S0925-8388(96)02986-6 ↗
14. Jin L, Zhou G, Shimai S, Zhang J, Wang S (2010) ZrO2-doped Y2O3 transparent ceramics via slip casting and vacuum sintering. J Eur Ceram Soc 30:2139–214310.1016/j.jeurceramsoc.2010.04.004 ↗
15. Podowitz SR, Gaumé R, Feigelson RS (2010) Effect of Europium concentration on densification of transparent Eu:Y2O3 scintillator ceramics using hot pressing. J Am Ceram Soc 93:82–8810.1111/j.1551-2916.2009.03350.x ↗
16. Goldstein A, Goldenberg A, Hefetz M (2009) Transparent polycrystalline MgAl2O4 spinel with submicron grains by low temperature sintering. J Ceram Soc Jpn 117:1281–128310.2109/jcersj2.117.1281 ↗
17. Krell A, Blank P, Ma H, Hutzler T, van Bruggen MPB, Apetz R (2003) Transparent sintered corundum with high hardness and strength. J Am Ceram Soc 86:12–1810.1111/j.1151-2916.2003.tb03270.x ↗
18. An L, Ito A, Goto T (2011) Fabrication of transparent Lu3NbO7 by spark plasma sintering. Mater Lett 65:3167–316910.1016/j.matlet.2011.07.010 ↗
19. An L, Ito A, Goto T (2011) Effects of ball milling and post-annealing on the transparency of spark plasma sintered Lu2O3. Ceram Int 37:2263–226710.1016/j.ceramint.2011.03.017 ↗
20. An L, Ito A, Goto T (2013) Transparent Lu3NbO7 bodies prepared by reactive spark plasma sintering and their optical and mechanical properties. Ceram Int 39:383–38710.1016/j.ceramint.2012.06.038 ↗
21. Fu P, Lu W, Lei W, Xu Y, Wang X, Wu J (2013) Transparent polycrystalline MgAl2O4 ceramic fabricated by spark plasma sintering: microwave dielectric and optical properties. Ceram Int 39:2481–248710.1016/j.ceramint.2012.09.006 ↗
22. Morita K, Kim B-N, Yoshida H, Hiraga K, Sakka Y (2015) Spectroscopic study of discoloration of transparent MgAl2O4 spinel fabricated by spark plasma sintering (SPS) processing. Acta Mater 84:9–1910.1016/j.actamat.2014.10.030 ↗
23. Li W, Mei B, Song J, Zhu W, Yi G (2016) Yb3+ doped CaF2 transparent ceramics by spark plasma sintering. J Alloys Compd 660:370–37410.1016/j.jallcom.2015.11.104 ↗
24. Groza JR, Risbud SH, Yamazaki K (1992) Plasma activated sintering of additive free AlN powders to near theoretical density in five minutes. J Mater Res 7:2643–264510.1557/JMR.1992.2643 ↗
25. Zhou Y, Hirao K, Yamauchi Y, Kanzaki S (2003) Effects of heating rate and particle size on pulse electric current sintering of alumina. Scripta Mater 48:1631–163610.1016/S1359-6462(03)00138-6 ↗
26. Babich TG, Zagorodnyuk AV, Teterin GA, Sadkovskaya LV, Zhirnova AP (1989) The Y2O3–Nb2O5 system. Ukrainskii Khimicheskii Zhurnal 55:132–134
27. Scherrer P (1918) Bestimmung der Grosse und der Inneren Struktur von Kolloidteilchen Mittels Rontgenstrahlen, Nachrichten von der Gesellschaft der Wissenschaften, Gottingen. Mathematisch-Physikalische Klasse, 2, 98–100
28. German RM (1996) Sintering theory and practice. Wiley, New York, pp 67–173
29. Kim K-Y, Durand A, Heintz J-M, Veillere A, Jubera V (2016) Spectral evolution of Eu3+ doped Y3NbO7 niobate induced by temperature. J Solid State Chem 235:169–17410.1016/j.jssc.2015.12.023 ↗
30. Boulesteix R, Epherre R, Noyau S, Vandenhende M, Maître A, Sallé C, Alombert-Goget G, Guyot Y, Brenier A (2014) Highly transparent Nd:Lu2O3 ceramics obtained by coupling slip-casting and spark plasma sintering. Scr Mater 75:54–5710.1016/j.scriptamat.2013.11.016 ↗
31. Morita K, Kim B-N, Yoshida H, Zhang H, Hiraga K, Sakka Y (2012) Effect of loading schedule on densification of MgAl2O4 spinel during Spark Plasma Sintering (SPS) processing. J Eur Ceram Soc 32:2303–230910.1016/j.jeurceramsoc.2012.02.016 ↗
32. Boulesteix R, Maître A, Lemański K, Dereń PJ (2017) Structural and spectroscopic properties of MgAl2O4:Nd3+ transparent ceramics fabricated by using two-step Spark Plasma Sintering. J Alloys Compd 722:358–36410.1016/j.jallcom.2017.06.101 ↗